Filter interviews by
A circuit breaker is an electrical device that automatically interrupts the flow of current to prevent overloads and short circuits.
Protects electrical circuits from damage due to overloads.
Automatically resets after the fault is cleared in some types.
Commonly used in residential and commercial electrical systems.
Example: A circuit breaker trips when too many appliances are used simultaneously.
Types include therma...
A thermistor is a temperature-sensitive resistor used for temperature measurement and control in various applications.
Thermistors are made of ceramic materials that exhibit a significant change in resistance with temperature.
There are two main types: NTC (Negative Temperature Coefficient) and PTC (Positive Temperature Coefficient).
NTC thermistors decrease in resistance as temperature increases, commonly used in te...
Power curve is a graphical representation of the power output of a device or system over a range of operating conditions.
Power curve shows the relationship between power output and operating conditions such as speed, load, or temperature.
It helps in determining the optimal operating conditions for maximum power output.
Power curves are commonly used in fields like engineering, renewable energy, and automotive indus...
Wind turbines convert wind energy into electrical energy.
Wind turbines consist of blades, a rotor, a generator, and a tower.
The blades capture the wind and turn the rotor.
The rotor spins the generator, which produces electricity.
The tower supports the turbine and raises it above the ground for better wind access.
Wind turbines require consistent wind speeds of at least 6-9 mph to generate electricity.
The electricit...
Safety measures to be followed while working at heights
Use of proper personal protective equipment (PPE) like harness, helmet, etc.
Proper training and certification of workers
Regular inspection and maintenance of equipment and tools
Proper communication and coordination among workers
Adherence to safety guidelines and regulations
Proper risk assessment and hazard identification
Use of guardrails, safety nets, and othe...
Salary for Junior Engineer varies based on experience and industry standards.
Salary can range from $50,000 to $80,000 per year depending on location and company
Experience and education level can also impact salary
Research industry standards and negotiate salary during the hiring process
There are two main types of threads - internal threads and external threads.
Internal threads are threads on the inside of a hole, while external threads are threads on the outside of a cylinder or cone.
Common types of threads include metric threads, unified threads, and pipe threads.
Threads can also vary in pitch, diameter, and shape depending on their intended use.
There are various types of motors such as AC, DC, stepper, servo, etc. DOL starter is a type of starter used for induction motors.
Types of motors include AC, DC, stepper, servo, etc.
DOL starter stands for Direct-On-Line starter.
It is used for induction motors.
It provides full voltage to the motor at the start.
It is the simplest and cheapest type of starter.
Other types of starters include star-delta, soft starter, ...
Earth test procedure involves checking the grounding system to ensure safety and proper functioning.
Check for proper installation of grounding rods
Measure resistance between grounding system and earth
Verify continuity of grounding system
Perform visual inspection for any damage or corrosion
Document test results for future reference
Gears are mechanical devices that transmit motion and power between rotating shafts. There are various types of gears including spur, helical, bevel, and worm gears.
Gears are mechanical components with teeth that mesh with each other to transmit motion and power.
Spur gears have straight teeth and are the most common type of gear.
Helical gears have angled teeth for smoother and quieter operation.
Bevel gears have co...
A circuit breaker is an electrical device that automatically interrupts the flow of current to prevent overloads and short circuits.
Protects electrical circuits from damage due to overloads.
Automatically resets after the fault is cleared in some types.
Commonly used in residential and commercial electrical systems.
Example: A circuit breaker trips when too many appliances are used simultaneously.
Types include thermal, ma...
A thermistor is a temperature-sensitive resistor used for temperature measurement and control in various applications.
Thermistors are made of ceramic materials that exhibit a significant change in resistance with temperature.
There are two main types: NTC (Negative Temperature Coefficient) and PTC (Positive Temperature Coefficient).
NTC thermistors decrease in resistance as temperature increases, commonly used in tempera...
Gears are mechanical devices that transmit motion and power between rotating shafts. There are various types of gears including spur, helical, bevel, and worm gears.
Gears are mechanical components with teeth that mesh with each other to transmit motion and power.
Spur gears have straight teeth and are the most common type of gear.
Helical gears have angled teeth for smoother and quieter operation.
Bevel gears have cone-sh...
There are two main types of threads - internal threads and external threads.
Internal threads are threads on the inside of a hole, while external threads are threads on the outside of a cylinder or cone.
Common types of threads include metric threads, unified threads, and pipe threads.
Threads can also vary in pitch, diameter, and shape depending on their intended use.
A 3 phase induction motor is a type of AC motor that operates on a three-phase power supply.
Consists of a stator with three windings and a rotor
Works on the principle of electromagnetic induction
Commonly used in industrial applications for driving pumps, compressors, and fans
Power curve is a graphical representation of the power output of a device or system over a range of operating conditions.
Power curve shows the relationship between power output and operating conditions such as speed, load, or temperature.
It helps in determining the optimal operating conditions for maximum power output.
Power curves are commonly used in fields like engineering, renewable energy, and automotive industry.
F...
I applied via Walk-in and was interviewed before Sep 2023. There was 1 interview round.
Earth test procedure involves checking the grounding system to ensure safety and proper functioning.
Check for proper installation of grounding rods
Measure resistance between grounding system and earth
Verify continuity of grounding system
Perform visual inspection for any damage or corrosion
Document test results for future reference
I applied via Walk-in and was interviewed in May 2022. There were 3 interview rounds.
I applied via Job Fair and was interviewed before Aug 2022. There were 2 interview rounds.
Daily breakdowns of wind turbine generators, troubleshooting methods, and how components work together.
Daily breakdowns can include issues with gearbox, blades, or electrical systems.
Troubleshooting involves identifying the root cause of the issue and fixing it efficiently.
Components like the rotor, generator, and tower work together to convert wind energy into electricity.
I applied via Walk-in and was interviewed before Jun 2023. There were 2 interview rounds.
Very useful discussed.
I applied via Walk-in and was interviewed before Dec 2021. There were 4 interview rounds.
I applied via Walk-in and was interviewed before Oct 2021. There were 3 interview rounds.
My demand is for a challenging and dynamic work environment where I can apply my engineering skills and learn new ones.
I am looking for a company that values innovation and creativity
I want to work with a team that is passionate about their work
I am interested in opportunities for professional growth and development
Examples of companies I admire include SpaceX, Tesla, and Google
Top trending discussions
based on 15 interview experiences
Difficulty level
Duration
based on 193 reviews
Rating in categories
Electrical Engineer
585
salaries
| ₹2 L/yr - ₹5.1 L/yr |
Engineer
489
salaries
| ₹1.9 L/yr - ₹5.4 L/yr |
Junior Engineer
358
salaries
| ₹1.6 L/yr - ₹5.4 L/yr |
Assistant Manager
277
salaries
| ₹5.2 L/yr - ₹12 L/yr |
Senior Engineer
267
salaries
| ₹3.5 L/yr - ₹8 L/yr |
Adani Group
NTPC
Torrent Power
Tata Power