Filter interviews by
I applied via Walk-in and was interviewed in Jun 2021. There were 5 interview rounds.
MTC stands for Measurement and Test Control.
MTC is a process used in quality engineering to ensure that measurements and tests are performed accurately and consistently.
It involves establishing control over measurement and test equipment, calibration procedures, and data analysis methods.
MTC helps in maintaining the reliability and accuracy of measurements and tests, which is crucial for quality assurance.
For example, ...
The problem-solving technique involves identifying the problem, analyzing its root cause, brainstorming solutions, implementing the best solution, and evaluating the results.
Identify the problem by gathering information and understanding the desired outcome.
Analyze the root cause by using tools like fishbone diagram or 5 Whys.
Brainstorm potential solutions by involving a diverse group of stakeholders.
Implement the best...
Top trending discussions
posted on 29 Oct 2023
I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 4 interview rounds.
To improve skill manpower, focus on training programs, mentorship, career development, and recruitment strategies.
Implement regular training programs to enhance skills and knowledge
Provide mentorship opportunities for junior employees to learn from experienced professionals
Offer career development paths and opportunities for advancement within the organization
Revise recruitment strategies to attract top talent with the
TPM stands for Total Productive Maintenance, a proactive approach to maintenance that aims to maximize equipment effectiveness.
TPM focuses on preventing equipment breakdowns through regular maintenance and employee involvement.
It involves setting up autonomous maintenance teams, conducting planned maintenance activities, and improving overall equipment efficiency.
TPM also emphasizes training employees to take ownership...
posted on 3 Sep 2024
I have a strong background in quality engineering, proven track record of improving processes, and a passion for continuous improvement.
I have a Bachelor's degree in Engineering with a focus on quality control
I have successfully implemented lean manufacturing principles in my previous role, resulting in a 20% increase in efficiency
I am certified in Six Sigma and have led multiple projects that resulted in cost savings
ECN process stands for Engineering Change Notice process, which is used to document and track changes made to a product or process.
ECN process is used to document and track changes made to a product or process.
It involves creating a formal notice detailing the proposed change, including the reason for the change and its potential impact.
The notice is then reviewed and approved by relevant stakeholders before implementa...
BOM for harness refers to the Bill of Materials for the components used in the harness assembly.
BOM for harness includes a list of all components required for the harness assembly
It specifies the quantity of each component needed
BOM helps in ensuring all necessary parts are included in the assembly
Examples of components in a harness BOM: wires, connectors, terminals, protective sleeves
posted on 31 Jan 2023
I applied via Naukri.com and was interviewed in Jul 2022. There were 2 interview rounds.
The end-to-end process for wiring harness involves designing, manufacturing, testing, and installation.
Designing the wiring harness based on the electrical requirements and specifications
Manufacturing the harness using automated machines or manual labor
Testing the harness for electrical continuity, insulation resistance, and other parameters
Installing the harness in the vehicle or equipment
Ensuring proper routing and s...
FAI stands for First Article Inspection, a process to verify the initial production run meets all requirements.
FAI from 1 is the initial inspection of the first article produced in a production run
FAI from 2 is the inspection of the first article produced after changes have been made to the production process
FAI from 3 is the inspection of the first article produced after changes have been made to the design or enginee...
posted on 13 May 2024
I applied via Walk-in and was interviewed in Apr 2024. There was 1 interview round.
I have always been passionate about ensuring quality and efficiency in processes, which drew me to the field of Quality Engineering.
I have a strong attention to detail and enjoy problem-solving.
I am motivated by the opportunity to make a positive impact on product quality.
I have experience in implementing quality control measures in previous roles.
I am excited about the continuous learning and improvement opportunities
posted on 26 Aug 2022
I applied via Naukri.com and was interviewed in Feb 2022. There were 3 interview rounds.
posted on 3 Sep 2022
I applied via Naukri.com and was interviewed before Sep 2021. There was 1 interview round.
I applied via Naukri.com and was interviewed in Aug 2023. There were 2 interview rounds.
I was interviewed before Apr 2021.
Toe in and toe out are terms used to describe the angle of the wheels on a vehicle.
Toe in refers to the front of the wheels being closer together than the back of the wheels.
Toe out refers to the front of the wheels being further apart than the back of the wheels.
Toe in/out can affect the handling and tire wear of a vehicle.
Proper alignment is important for safety and optimal performance.
Wheel balancing is the process of equalizing the weight of a tire and wheel assembly so that it spins smoothly at high speeds.
It involves adding or removing weights to the wheel to balance it
Unbalanced wheels can cause vibrations, uneven tire wear, and steering issues
It is important to balance wheels regularly, especially after getting new tires or wheels
Examples of wheel balancing equipment include wheel balancers and
Caster camber angle is the angle between the vertical axis of the wheel and the steering axis.
It affects the stability and handling of the vehicle.
Caster angle helps in straight-line stability and steering returnability.
Camber angle helps in tire wear and cornering ability.
Welding defects are imperfections that occur during the welding process.
Common welding defects include porosity, undercutting, and incomplete fusion.
Porosity is caused by gas pockets trapped in the weld, while undercutting is a groove at the base of the weld.
Incomplete fusion occurs when the weld metal does not fuse completely with the base metal.
Welding defects can weaken the weld and compromise its integrity.
Quality ...
Vernier caliper least count is the smallest measurement that can be read on the scale of the caliper.
The least count of a Vernier caliper is usually 0.02 mm or 0.05 mm.
It is determined by dividing the smallest division on the main scale by the number of divisions on the Vernier scale.
For example, if the smallest division on the main scale is 1 mm and there are 20 divisions on the Vernier scale, the least count would be
The type of welding used depends on the material being welded and the desired strength of the joint.
Common types of welding include MIG, TIG, stick, and flux-cored welding.
MIG welding is often used for welding aluminum and steel.
TIG welding is commonly used for welding thin materials and for precision welding.
Stick welding is often used for welding thicker materials and in outdoor environments.
Flux-cored welding is sim...
What your view on alcohol and alcohol bane or not and why
based on 1 interview
Interview experience
based on 9 reviews
Rating in categories
Assistant Engineer
173
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
86
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
78
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
71
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
55
salaries
| ₹0 L/yr - ₹0 L/yr |
Samvardhana Motherson Group
Bharat Forge
Endurance Technologies
Rane Holdings