Upload Button Icon Add office photos

Filter interviews by

Sterling and Wilson Renewable Energy Interview Questions, Process, and Tips

Updated 16 Feb 2025

Top Sterling and Wilson Renewable Energy Interview Questions and Answers

View all 14 questions

Sterling and Wilson Renewable Energy Interview Experiences

Popular Designations

6 interviews found

Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
No response

I was interviewed in Jan 2025.

Round 1 - HR 

(1 Question)

  • Q1. Normal Questions
Round 2 - Group Discussion 

Details Discussion about my current JD

Interview Preparation Tips

Interview preparation tips for other job seekers - I would not recommend attending an interview at Dash- dash if you are expecting fair and competitive compensation. Despite being a large company, their management operates with a mindset similar to many other organizations prioritizing senior employees while disregarding the financial growth of new hires.
During the interview process, they made it clear that they were unwilling to offer even a minimal salary increase, expecting candidates to join at their current CTC. This approach reflects a biased attitude where only senior employees ("Buddhas") are deemed worthy of financial growth, while juniors and new hires are expected to accept stagnant salaries, regardless of their need or contributions.
It is disappointing to see such an unfair mindset, where only a select few are considered deserving of career growth and financial well-being while others are expected to settle for less. Companies should recognize that every employee, regardless of their experience level, has a family to support and deserves a fair opportunity for financial and professional advancement.

Senior Accounts Executive Interview Questions asked at other Companies

Q1. How To Prepare Cash Flow, What Is GR-IR, Which Type of Invoice Booking Has Done, What TDS Rate Do You Know.
View answer (1)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Approached by Company and was interviewed in Aug 2024. There were 2 interview rounds.

Round 1 - Case Study 

Construction concrete design

Round 2 - Aptitude Test 

Basic concepts of construction concrete test

Civil Quality Engineer Interview Questions asked at other Companies

Q1. What is the setting time of concrete ? How much time to take concrete initial setting arrived? How can be know?
View answer (2)

I applied via Job Portal and was interviewed in Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(9 Questions)

  • Q1. How well verse you are with staad
  • Ans. I can model, analyse and design steel and RCC structures
  • Answered Anonymously
  • Q2. How will you design a foundation
  • Ans. 

    A foundation is designed by analyzing soil conditions, determining load requirements, selecting appropriate materials, and creating a structural design.

    • Conduct a soil investigation to determine soil type, bearing capacity, and potential for settlement

    • Calculate the load requirements based on the weight of the structure and any anticipated loads

    • Select appropriate materials for the foundation, such as concrete, steel, or ...

  • Answered by AI
  • Q3. Diffrence between pile and isolated foundation
  • Ans. 

    Pile foundation is used for heavy structures while isolated foundation is used for light structures.

    • Pile foundation transfers load to deeper soil layers while isolated foundation transfers load to the soil directly beneath it.

    • Pile foundation is used for structures like bridges, high-rise buildings, and industrial plants while isolated foundation is used for houses, small buildings, and sheds.

    • Pile foundation requires mo...

  • Answered by AI
  • Q4. How is a bolted connection design
  • Ans. 

    A bolted connection design involves selecting appropriate bolts, nuts, and washers to join two or more components together.

    • The design must consider the loads and stresses that the connection will experience

    • The bolt size, grade, and material must be selected based on the required strength and corrosion resistance

    • The number and spacing of bolts must be determined to evenly distribute the load

    • Proper tightening torque must...

  • Answered by AI
  • Q5. What is nominal stress for a mild steel plate
  • Ans. 

    The nominal stress for mild steel plate depends on the thickness of the plate and the yield strength of the steel.

    • Nominal stress is the maximum stress that a material can withstand before it fails

    • For mild steel, the nominal stress is typically calculated using the yield strength of the steel

    • The thickness of the plate also plays a role in determining the nominal stress

    • The formula for calculating nominal stress is: Nomin...

  • Answered by AI
  • Q6. Minimum reinforcement for RCC columns , beams , slabs
  • Ans. 

    Minimum reinforcement for RCC columns, beams, slabs is specified in codes and depends on various factors.

    • Minimum reinforcement is specified in codes such as IS 456 for Indian standards and ACI 318 for American standards.

    • The minimum reinforcement depends on factors such as the size of the member, the type of loading, and the exposure conditions.

    • For example, the minimum reinforcement for a column may be 0.8% of the cross...

  • Answered by AI
  • Q7. How well verse you are in hydrology
  • Ans. 

    I have a basic understanding of hydrology and its principles.

    • I have studied hydrology as part of my civil engineering degree

    • I understand the water cycle and how it relates to hydrology

    • I am familiar with common hydrological models such as HEC-HMS and SWMM

    • I have worked on projects that involved hydrological analysis and design

    • I am willing to learn more about hydrology to improve my skills

  • Answered by AI
  • Q8. What do you know about solar industry
  • Ans. 

    Solar industry involves the production and distribution of solar energy through various technologies.

    • Solar industry is a rapidly growing sector globally

    • It includes the production of solar panels, solar cells, and other related equipment

    • Solar energy is used for various purposes such as electricity generation, heating, and cooling

    • The industry is heavily dependent on government policies and incentives

    • Major players in the ...

  • Answered by AI
  • Q9. How does solar module work
  • Ans. 

    Solar modules convert sunlight into electricity using photovoltaic cells.

    • Photovoltaic cells absorb sunlight and release electrons, creating a flow of electricity.

    • The electricity generated by the cells is direct current (DC), which is converted to alternating current (AC) by an inverter.

    • The AC electricity is then used to power homes, businesses, and other electrical devices.

    • Solar modules can be installed on rooftops, in...

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Describe your goals in breif
  • Q2. Where do you see yourself in 5 years

Interview Preparation Tips

Topics to prepare for Sterling and Wilson Renewable Energy Design Engineer interview:
  • Civil engineering
  • Pile Foundation
  • Solar power plant
Interview preparation tips for other job seekers - Just be confident, and if your are a working professional be well versed with your cv

Top Sterling and Wilson Renewable Energy Design Engineer Interview Questions and Answers

Q1. What is nominal stress for a mild steel plate
View answer (1)

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)

Site Engineer Interview Questions & Answers

user image Anonymous

posted on 23 Oct 2022

I applied via Referral and was interviewed in Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How to do module testing
  • Ans. 

    Module testing involves testing individual units or modules of a software application.

    • Identify the individual modules to be tested

    • Develop test cases for each module

    • Execute the test cases and record the results

    • Fix any issues found during testing

    • Repeat the process for each module until all are tested

  • Answered by AI
  • Q2. How to do transformer maintenance
  • Ans. 

    Transformer maintenance involves regular inspection, cleaning, and testing to ensure optimal performance and prevent breakdowns.

    • Inspect transformer components for signs of wear and tear

    • Clean transformer components to prevent buildup of dirt and debris

    • Test transformer oil for impurities and replace if necessary

    • Check for loose connections and tighten as needed

    • Monitor transformer temperature and vibration levels

    • Perform re...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - One should have good technical knowledge of solar plant

Site Engineer Interview Questions asked at other Companies

Q1. 1.BBS calculation of slab? 2.Stairs case riser and tread dimension? 3.Types of cement? 4.Full form of tmt, pcc, rcc, tmx, dpc 5.Definition of plinth area, courtyard area, built-up area? 6.function of dpc 8.standard size of brick? 9. Write g... read more
View answer (3)

Sterling and Wilson Renewable Energy interview questions for popular designations

 Civil Quality Engineer

 (1)

 Design Engineer

 (1)

 Electrical Engineer

 (1)

 Senior Accounts Executive

 (1)

 Senior Manager

 (1)

 Site Engineer

 (1)

I applied via Referral and was interviewed in Dec 2021. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Related to profile questions was asked.
Round 2 - HR 

(1 Question)

  • Q1. Discussion on salary

Interview Preparation Tips

Interview preparation tips for other job seekers - Worst company, no one should join this company. Fake management , no leaders left to run this company.

Senior Manager Interview Questions asked at other Companies

Q1. 1. What you understand the requirement of shuttering material at project site?
View answer (19)

I applied via Walk-in and was interviewed before Oct 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - One-on-one 

(4 Questions)

  • Q1. What you know about Transformer testing
  • Ans. 

    Transformer testing involves various tests to ensure proper functioning and safety of transformers.

    • Tests include insulation resistance, winding resistance, turns ratio, and polarity tests.

    • Other tests include short circuit impedance, open circuit and load loss, and temperature rise tests.

    • Testing is important to ensure proper functioning and safety of transformers, as well as to detect any faults or defects.

    • Testing is ty...

  • Answered by AI
  • Q2. How you doing string monitoring
  • Ans. 

    I use various techniques such as current measurement and temperature sensing to monitor strings in electrical systems.

    • I monitor the current flowing through each string to detect any abnormalities or faults.

    • I also use temperature sensors to detect any overheating in the strings.

    • I may use other techniques such as voltage measurement or impedance analysis depending on the specific system.

    • Regular monitoring and analysis of...

  • Answered by AI
  • Q3. How you doing cable testing and laying
  • Ans. 

    I have experience in cable testing and laying through my previous projects and internships.

    • I have knowledge of different types of cables and their specifications

    • I have experience in using cable testing equipment such as multimeters and cable fault locators

    • I am familiar with cable laying techniques and safety protocols

    • I have worked on projects involving cable installation for power distribution and communication network...

  • Answered by AI
  • Q4. What you know about module connection
  • Ans. 

    Module connection refers to the process of connecting different modules or components in an electrical system.

    • Module connection involves connecting different components or modules in an electrical system to ensure proper functioning.

    • It is important to ensure that the connections are secure and properly insulated to prevent electrical hazards.

    • Different types of connectors such as wire-to-board, board-to-board, and wire-...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please do work with safety
Safety and quality is most important in work

Electrical Engineer Interview Questions asked at other Companies

Q1. What is the difference between Switch gear & Circuit Breakers ?
View answer (11)

Jobs at Sterling and Wilson Renewable Energy

View all

Interview questions from similar companies

IT Solution Expert Interview Questions & Answers

Siemens Energy user image Anonymous

posted on 15 Feb 2022

I applied via Naukri.com and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

There were medium level aptitude questions and then Data structures and Algorithms theoretical MCQs.

Round 2 - Technical 

(1 Question)

  • Q1. 2nd round was the technical interview just asking the basic technical questions related to OOPS and SQL. There were also project related questions.

Interview Preparation Tips

Interview preparation tips for other job seekers - Have good in depth knowledge of Data structures and Algorithms theoretically since it was the entry level profile so there was no coding round.

I applied via Walk-in and was interviewed in Sep 2021. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. All field releated and technical questions
  • Q2. I have all about field

Interview Preparation Tips

Interview preparation tips for other job seekers - we have about our field knowledge and conduct full confidence during interview.

I applied via Recruitment Consultant and was interviewed in Jul 2021. There were 7 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. GST
  • Q2. SAP
  • Q3. Managerial Skills
  • Q4. Work Experience
  • Q5. Costing

Interview Preparation Tips

Interview preparation tips for other job seekers - Be knowledge about ur profession

Interview Questionnaire 

2 Questions

  • Q1. Pullout Test CBR Test ERT paling MMS coordinate survey boundary concrete cube slmp test cement test
  • Q2. No material vestege paling concrete

Sterling and Wilson Renewable Energy Interview FAQs

How many rounds are there in Sterling and Wilson Renewable Energy interview?
Sterling and Wilson Renewable Energy interview process usually has 2-3 rounds. The most common rounds in the Sterling and Wilson Renewable Energy interview process are Resume Shortlist, Technical and HR.
How to prepare for Sterling and Wilson Renewable Energy interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Sterling and Wilson Renewable Energy. The most common topics and skills that interviewers at Sterling and Wilson Renewable Energy expect are Electrical Design, Primavera, Solar, Procurement and Solar Energy.
What are the top questions asked in Sterling and Wilson Renewable Energy interview?

Some of the top questions asked at the Sterling and Wilson Renewable Energy interview -

  1. What is nominal stress for a mild steel pl...read more
  2. Minimum reinforcement for RCC columns , beams , sl...read more
  3. What do you know about solar indus...read more

Tell us how to improve this page.

Sterling and Wilson Renewable Energy Interview Process

based on 5 interviews

Interview experience

3.4
  
Average
View more

Interview Questions from Similar Companies

Adani Power Interview Questions
3.9
 • 217 Interviews
Suzlon Group Interview Questions
4.1
 • 129 Interviews
Adani Green Energy Interview Questions
4.1
 • 93 Interviews
ReNew Interview Questions
4.2
 • 87 Interviews
Waaree Energies Interview Questions
3.9
 • 57 Interviews
Acme Cleantech Solutions Interview Questions
3.8
 • 50 Interviews
Greenko Group Interview Questions
3.8
 • 47 Interviews
Vikram Solar Interview Questions
3.9
 • 31 Interviews
Azure Power Interview Questions
3.9
 • 20 Interviews
Hero Future Energies Interview Questions
4.3
 • 3 Interviews
View all

Sterling and Wilson Renewable Energy Reviews and Ratings

based on 91 reviews

4.1/5

Rating in categories

3.9

Skill development

4.0

Work-life balance

3.8

Salary

4.2

Job security

4.0

Company culture

3.6

Promotions

4.0

Work satisfaction

Explore 91 Reviews and Ratings
Senior Engineer-Geotechnical

Delhi/Ncr,

Mumbai

4-6 Yrs

â‚ą 6.5-6 LPA

Senior Executive Accounts

Mumbai

3-6 Yrs

Not Disclosed

Senior Planning Engineer- Khavda(Site)

Bhuj,

Dhule

3-8 Yrs

Not Disclosed

Explore more jobs
Senior Manager
27 salaries
unlock blur

â‚ą16.4 L/yr - â‚ą33.4 L/yr

Senior Engineer
17 salaries
unlock blur

â‚ą4.5 L/yr - â‚ą9 L/yr

Manager
15 salaries
unlock blur

â‚ą14 L/yr - â‚ą21 L/yr

Deputy Manager
13 salaries
unlock blur

â‚ą7 L/yr - â‚ą13.1 L/yr

Assistant Manager
12 salaries
unlock blur

â‚ą6.5 L/yr - â‚ą12 L/yr

Explore more salaries
Compare Sterling and Wilson Renewable Energy with

Adani Green Energy

4.1
Compare

ReNew

4.2
Compare

Azure Power

3.9
Compare

Hero Future Energies

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview