AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Solis Design Engineer Interview Questions and Answers
Solis Design Engineer Interview Experiences
1 interview found
Anonymous
Selected
I applied via Naukri.com and was interviewed before Jun 2023. There was 1 interview round.
(3 Questions)
- Q1. How thermostat work
- Ans.
Thermostats work by sensing the temperature in a space and activating heating or cooling systems to maintain a set temperature.
Thermostats have a temperature sensor that detects the current temperature.
They are programmed with a desired temperature setting.
When the current temperature deviates from the set temperature, the thermostat signals the heating or cooling system to turn on or off.
Thermostats can be manual or p...
- Q2. Carbon composition of SS
- Ans.
The carbon composition of stainless steel varies depending on the grade and type of stainless steel.
Carbon content in stainless steel is typically low, ranging from 0.03% to 1.2%.
Higher carbon content can improve hardness and strength but may reduce corrosion resistance.
Examples of stainless steel grades with varying carbon content include 304 (0.08% max), 316 (0.08% max), and 440C (0.95-1.2%).
- Q3. Why tractors rear tyre are of big size
- Ans.
Tractors rear tyres are of big size for better traction, stability, and weight distribution.
Big rear tyres provide better traction in various terrains
Large size helps in distributing the weight of the heavy machinery more evenly
Increased size contributes to stability, especially when carrying heavy loads or operating on uneven surfaces
Interview questions from similar companies
Interview Questionnaire
1 Question
- Q1. Normal question about personality and job related
Interview Preparation Tips
Experience: Interview was going smoothly & all questions was related my job so it's was easy for me.
Tips: Good knowledge about of wind turbine
Duration: 2 hours
Total Questions: 25
Round: HR Interview
Experience: Interview was completed so easy
Tips: Required nice personality and confidence is must required
SAGAR SHAH
Interview Preparation Tips
Experience: CRITERIA:6.5+ CGPANO BACKLOGS
Tips: TRY TO WORK HARD IN THE EARLIER SEMESTERS TO BE ELIGIBLE FOR MOST OF THE COMPANIES.
Round: Test
Experience: 30 TECHNICAL QUESTIONS, PURELY BRANCH SPECIFIC, EASY AND BASIC CONCEPTS WERE ASKED.30 APTITUDE AND ENGLISH QUESTIONS, VERY EASY
Tips: PREPARE TECHNICAL PART WELLPRACTICE APTITUDE AND ENGLISH FROM www.indiabix.comVERY HELPFUL WEBSITE
Duration: 60 minutes
Total Questions: 60
Round: HR Interview
Experience: GENERAL QUESTIONS WERE ASKED:ABOUT MYSELFFAMILY BACKGROUNDSCHOOLING AND ACADEMIC ACHIEVEMENTSABOUT JOINING TCE
Tips: DON'T MANIPULATE THE TRUTH.ANSWER CLEARLY AND CONFIDENTLY.
Round: Technical Interview
Experience: TECHNICAL QUESTIONS RELATED TO ELECTIVE SUBJECTS WERE ASKED.ALSO DESIGN STEPS OF VARIOUS STRUCTURAL ELEMENTS WERE ASKED.
Tips: BE PREPARED. SAY "DON'T KNOW THE ANSWER" INSTEAD OF SPEAKING NONSENSE. ANSWER ONLY WHAT IS ASKED. EXTRA INFO GIVEN BY YOU CAN GET YOU IN UNWANTED TROUBLE!! :P
General Tips: BEST OF LUCK.
Skill Tips: MAIN FOCUS ON THE WAY YOU COMMUNICATE WITH THE INTERVIEWERS IN ENGLISH!!
Skills: COMMUNICATION SKILLS
College Name: NIT SURAT
Motivation: GOOD REPUTATION. IT WAS EXACTLY MATCHING TO THE JOB PROFILE I ASPIRED FOR.TATA GROUP IS A BIG BRAND IN INDIA AND CAN LEAD TO MANY FUTURE BENEFITS IF YOU SERVE THEM FOR CONSIDERABLE AMOUNT OF TIME.
Funny Moments: THEY ASKED ME: "ANY SUGGESTION FOR IMPROVING OUR SELECTION PROCEDURE?"I ANSWERED: "YOU SHOULD CHANGE IT. TEST SHOULD BE ONLINE RATHER THAN BEING OFFLINE i.e. PEN AND PAPER."THEY WERE IMPRESSED AND APPRECIATED IT. :P
I applied via Campus Placement and was interviewed before Feb 2021. There were 2 interview rounds.
(2 Questions)
- Q1. About college projects
- Q2. Technicals related to it
(4 Questions)
- Q1. What is your family background?
- Q2. Where do you see yourself in 5 years?
- Q3. What are your strengths and weaknesses?
- Q4. Tell me about yourself.
Interview Preparation Tips
- Design considerations
- Tools
I applied via Naukri.com and was interviewed in Nov 2020. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. How will you analyse the total consumption of diesel in equipment
- Ans.
To analyse total diesel consumption in equipment, I would gather data on usage and calculate fuel efficiency.
Collect data on equipment usage and fuel consumption
Calculate fuel efficiency by dividing fuel consumption by equipment usage
Compare fuel efficiency across different equipment to identify outliers
Identify factors that may affect fuel efficiency, such as maintenance or operator behavior
Interview Preparation Tips
I applied via Naukri.com and was interviewed before Jan 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. C++, Linux.
Interview Preparation Tips
I applied via Company Website and was interviewed in May 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. How will create BOM
- Ans.
BOM creation involves identifying and listing all the components required for a product.
Identify all the components required for the product
List the components in a structured format
Include part numbers, quantities, and descriptions
Ensure accuracy and completeness of the BOM
Update the BOM as necessary throughout the product development process
Interview Preparation Tips
Interview Questionnaire
2 Questions
- Q1. 1.About Clear Cover....?
- Q2. 2. Checking point in Beam and Column....?
- Ans.
Checking points in beam and column are critical for ensuring structural integrity.
Checking for cracks or deformations
Ensuring proper alignment and levelness
Verifying adequate reinforcement
Checking for proper bearing and connection details
Using non-destructive testing methods
Following applicable codes and standards
Selected
I applied via Approached by Company and was interviewed before Nov 2023. There was 1 interview round.
(2 Questions)
- Q1. What is the 164 notification
- Ans.
The 164 notification is a notification sent by a system to alert users of a specific event or action.
The 164 notification typically includes important information or updates that users need to be aware of.
It can be triggered by various events such as system errors, completed tasks, or new messages.
Users may receive the 164 notification through email, text message, or within the system itself.
- Q2. What is the use of winch machine
- Ans.
A winch machine is used for lifting or pulling heavy objects using a motor-driven cable or rope.
Used in construction for lifting heavy materials
Commonly used in off-road vehicles for recovery purposes
Found on boats for raising and lowering anchors
Can be used in forestry for dragging logs
Interview Preparation Tips
AKASH DUBEY
Selected
I applied via Naukri.com and was interviewed before Mar 2022. There were 4 interview rounds.
(1 Question)
- Q1. General introduction and If you have the ability to work under pressure
(3 Questions)
- Q1. What do you understand with the PV technology
- Ans.
PV technology refers to the use of photovoltaic cells to convert sunlight into electricity.
PV technology is a renewable energy source that is becoming increasingly popular.
It involves the use of solar panels to capture sunlight and convert it into electricity.
The technology is used in a variety of applications, from powering homes and businesses to providing electricity for remote areas.
PV systems can be installed on r...
- Q2. Why do you want to join us
- Ans.
I want to join because of the company's reputation, growth opportunities, and alignment with my skills and interests.
Reputation: The company has a strong reputation in the industry, known for its high-quality products and services.
Growth opportunities: I believe joining this company will provide me with ample opportunities to learn and grow in my career.
Alignment with skills and interests: The company's focus on [speci...
- Q3. How will you manage the rejection
- Ans.
I will manage rejection by staying positive, learning from the experience, and seeking feedback for improvement.
Maintain a positive mindset and not take rejection personally
Reflect on the reasons for rejection and identify areas for improvement
Seek feedback from the interviewer or others to understand areas of weakness
Use rejection as motivation to work harder and improve skills
Continue applying for other opportunities
Yes there was an assessment test with General reasoning question
Interview Preparation Tips
Solis Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Mechanical Engg. Design Interview Questions
- Senior Design Engineer Interview Questions
- Electrical Design Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Piping Designer Interview Questions
- Auto CAD Designer Interview Questions
- Junior Design Engineer Interview Questions
- Hardware Design Engineer Interview Questions
- Show more
Solis Design Engineer Interview Process
based on 1 interview
Interview experience
Design Engineer Interview Questions from Similar Companies
|
Territory Manager
4
salaries
|  ₹6 L/yr - ₹7 L/yr |
|
Senior Officer
4
salaries
| ₹2 L/yr - ₹3 L/yr |
|
Assistant Manager
3
salaries
| ₹5.9 L/yr - ₹6.5 L/yr |
|
Territory Sales Manager
3
salaries
| ₹6.2 L/yr - ₹7.5 L/yr |
|
Project Manager
3
salaries
| ₹7.2 L/yr - ₹9.1 L/yr |
Adani Green Energy
Azure Power
Vikram Solar
Waaree Energies
- Home >
- Interviews >
- Solis Interview Questions >
- Solis Design Engineer Interview Questions
