Upload Button Icon Add office photos

Filter interviews by

SIMPLEX ENGINEERING & FOUNDRY WORKS Quality Engineer Interview Questions, Process, and Tips

Updated 11 Apr 2023

SIMPLEX ENGINEERING & FOUNDRY WORKS Quality Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What least count of vernier and micrometer
  • Ans. 

    The least count of vernier and micrometer depends on their design and specifications.

    • The least count of a vernier caliper can range from 0.02 mm to 0.05 mm.

    • The least count of a micrometer can range from 0.001 mm to 0.01 mm.

    • The least count is the smallest measurement that can be read on the instrument.

    • The least count is determined by the number of divisions on the scale and the pitch of the screw.

    • Higher precision instru

  • Answered by AI
  • Q2. What are Gd&t symbols
  • Ans. 

    GD&T symbols are geometric dimensioning and tolerancing symbols used to specify and control the form, orientation, and location of features on a part.

    • GD&T symbols are used to ensure that parts are manufactured to the correct specifications and fit together properly.

    • Some common GD&T symbols include concentricity, perpendicularity, and position.

    • GD&T symbols are often used in engineering drawings and blueprints.

    • GD&T symbo...

  • Answered by AI
  • Q3. Do you know about IS 2062
  • Ans. 

    IS 2062 is a standard for hot rolled steel used in general structural purposes.

    • IS 2062 is a standard set by the Bureau of Indian Standards (BIS)

    • It specifies the requirements for hot rolled steel used in general structural purposes

    • The steel must have a minimum yield strength of 250 MPa

    • It covers steel grades from E 250 to E 650

    • IS 2062 is commonly used in the construction industry in India

  • Answered by AI
  • Q4. Do you have knowledge about UT
  • Ans. 

    Yes, UT stands for Ultrasonic Testing which is a non-destructive testing method used to detect flaws or defects in materials.

    • UT uses high-frequency sound waves to penetrate materials and detect internal flaws or defects.

    • It is commonly used in industries such as aerospace, automotive, and manufacturing.

    • UT can detect cracks, voids, and other defects that may not be visible to the naked eye.

    • It is a valuable tool for ensur...

  • Answered by AI

Interview questions from similar companies

I was interviewed before Sep 2016.

Interview Questionnaire 

1 Question

  • Q1. Ocampo, basic electronics and C

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 50

Skills: Embedded Systems, C Programming
College Name: Sahyadri college of engineering

I was interviewed in Jul 2017.

Interview Questionnaire 

2 Questions

  • Q1. Tel me about yourself
  • Ans. 

    Experienced Quality Engineer with a background in manufacturing and process improvement.

    • Bachelor's degree in Engineering

    • Certified Six Sigma Black Belt

    • Proficient in statistical analysis tools like Minitab

    • Led cross-functional teams to implement quality initiatives

    • Experience in root cause analysis and corrective action

  • Answered by AI
  • Q2. Tel me something about your education
  • Ans. 

    I have a Bachelor's degree in Mechanical Engineering from XYZ University.

    • Bachelor's degree in Mechanical Engineering

    • Graduated from XYZ University

    • Specialized in quality control and assurance

  • Answered by AI

Interview Preparation Tips

Round: HR Interview
Experience: Ans thanks for giving this apporchinuty any how in your hand ur having my CV I think u had gon through
Tips: Thank you

Round: Technical Interview
Experience: Especially I want have intrest to study so that I god less percentage but it's all my knowledge.
Tips: I am idiot but I can do it

Skills: Observations About Project

I applied via PLACEMENT

Interview Preparation Tips

Round: Technical Interview
Experience: Good detailed interview in terms of technical knowledge
Tips: Should be thorough with the projects you have done during the course

General Tips: be confident of what you put in your resume
Technical knowledge regarding projects undertaken during engineering should be sound
Be confident
Skills: Communication, Thinking capability, knowledge applying capability
College Name: V.E.S Institute Of Technology
Motivation: Opportunity to work in a renowned and core technical company
Funny Moments: We consider the interview panelists to be as tough as our viva externals. Interviewers are mostly on your side(contrary to viva professors :P)

Interview Questionnaire 

5 Questions

  • Q1. Pertaining to the mentioned roles and responsibilities in your resume
  • Q2. Planning and work order creation
  • Q3. Piling activities
  • Q4. Introduction
  • Q5. Cross checking of documents

Interview Preparation Tips

Round: Resume Shortlist
Experience: On the criteria that I scored atleast 60% overall and had no gap between job/s.

Interview Questionnaire 

1 Question

  • Q1. What is your role in previous company

I applied via Campus Placement and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

Mathematics, English, Reasoning

Round 2 - Technical 

(2 Questions)

  • Q1. They asked Technical questions
  • Q2. What is antenna What is satcom
  • Ans. 

    An antenna is a device that converts electrical signals into electromagnetic waves and vice versa. Satcom is short for satellite communication.

    • Antennas are used for transmitting and receiving signals in various applications such as radio, television, and wireless communication.

    • Satcom refers to the use of satellites for communication purposes, including television broadcasting, internet access, and military communicatio...

  • Answered by AI
Round 3 - Group Discussion 

Clean India
Corruption

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and believe in yourself

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Depends on experience
  • Q2. Related to systematic approach
  • Ans. Problem solving tools, OEE, FPY, Root cause analysis. 14Q, 5S
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Never join Bosch chakan if want to have growing future In career and work life balance.

I applied via Walk-in and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical questions.

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be focused about your passion & be confident.

I applied via Referral and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Maintenance phylosophy
  • Ans. Depends on equipment running hour, criticality, availability and standby.
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Thermax Limited Senior Engineer interview:
  • Boe
  • Energy manager
Interview preparation tips for other job seekers - Be confidential and technically strong.

SIMPLEX ENGINEERING & FOUNDRY WORKS Interview FAQs

How many rounds are there in SIMPLEX ENGINEERING & FOUNDRY WORKS Quality Engineer interview?
SIMPLEX ENGINEERING & FOUNDRY WORKS interview process usually has 2 rounds. The most common rounds in the SIMPLEX ENGINEERING & FOUNDRY WORKS interview process are Resume Shortlist and Technical.
What are the top questions asked in SIMPLEX ENGINEERING & FOUNDRY WORKS Quality Engineer interview?

Some of the top questions asked at the SIMPLEX ENGINEERING & FOUNDRY WORKS Quality Engineer interview -

  1. What least count of vernier and microme...read more
  2. Do you know about IS 2...read more
  3. Do you have knowledge about...read more

Tell us how to improve this page.

SIMPLEX ENGINEERING & FOUNDRY WORKS Quality Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
SIMPLEX ENGINEERING & FOUNDRY WORKS Quality Engineer Salary
based on 9 salaries
₹1.4 L/yr - ₹3.3 L/yr
38% less than the average Quality Engineer Salary in India
View more details

SIMPLEX ENGINEERING & FOUNDRY WORKS Quality Engineer Reviews and Ratings

based on 5 reviews

4.2/5

Rating in categories

4.4

Skill development

3.9

Work-life balance

3.3

Salary

4.4

Job security

4.1

Company culture

3.9

Promotions

3.7

Work satisfaction

Explore 5 Reviews and Ratings
Engineer
22 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
9 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
9 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Marketing Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare SIMPLEX ENGINEERING & FOUNDRY WORKS with

BHEL

4.1
Compare

Thermax Limited

4.1
Compare

Larsen & Toubro Limited

4.0
Compare

TCS

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview