Upload Button Icon Add office photos

Filter interviews by

SIMPLEX ENGINEERING & FOUNDRY WORKS Senior Engineer Mechanical Interview Questions and Answers

Updated 1 Dec 2022

SIMPLEX ENGINEERING & FOUNDRY WORKS Senior Engineer Mechanical Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. It's depends of your field
Round 3 - Technical 

(1 Question)

  • Q1. About your work experience etc
Round 4 - HR 

(1 Question)

  • Q1. Discussion about salary and other facilities

Interview Preparation Tips

Interview preparation tips for other job seekers - Do your basic . staight forword about your answer.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Soil compactor drum thickness.
  • Ans. 

    Soil compactor drum thickness is an important factor for compaction efficiency and durability.

    • The drum thickness of a soil compactor is typically between 0.5 to 1 inch.

    • Thicker drums are more durable and can withstand heavier loads.

    • The material of the drum also affects its thickness and durability, with steel drums being thicker than plastic ones.

    • Regular maintenance and inspection of the drum thickness is important to e

  • Answered by AI
  • Q2. Preventive maintenance of excavator.
  • Ans. 

    Preventive maintenance of excavator involves regular inspections, lubrication, and replacement of worn parts to ensure optimal performance and longevity.

    • Regularly inspecting the excavator for signs of wear and tear

    • Lubricating moving parts to prevent friction and reduce wear

    • Replacing worn out parts such as filters, belts, and hoses

    • Checking fluid levels and topping up as needed

    • Cleaning the excavator to prevent buildup of...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Understand preventive & predictive maintenance of equipment.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(11 Questions)

  • Q1. All question will not be same! Don't go through others suggestion.
  • Q2. Ambition box should not be a collection box.
  • Q3. Ambition is everybodys it own!
  • Q4. What type of platform is Ambition Box?
  • Ans. 

    Ambition Box is a platform for job seekers to find and apply for jobs, and for employers to post job openings and search for candidates.

    • Ambition Box is a job search platform

    • Job seekers can find and apply for jobs

    • Employers can post job openings and search for candidates

    • Provides company reviews and salary information

    • Offers career guidance and interview preparation tips

  • Answered by AI
  • Q5. Why its created?
  • Ans. 

    It is created to fulfill a specific need or solve a problem.

    • Products are created to meet the demands of consumers.

    • Innovations are created to solve problems and make life easier.

    • Prototypes are created to test and refine new ideas.

    • Art is created to express emotions and ideas.

    • Buildings are created to provide shelter and meet functional needs.

  • Answered by AI
  • Q6. Keep clean yourself with others veiw!
  • Q7. Without investment keep cleaning yourself.
  • Q8. We paid for internet service for social work and nothing else dear!
  • Q9. In 1 round - having infinite number of question so add your answer also from your end.
  • Q10. Rest will be shorly, please wait!
  • Q11. Now I have to say Bye Bye!
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Nothing to worry
  • Q2. Your roles and responsibilities

Interview Preparation Tips

Interview preparation tips for other job seekers - Be cool
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Material handling
  • Q2. Package equipment, air compressors, nitrogen, water treatment
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Aptitude Test 

Basic Maths, General Knowledge, Current affairs

Round 3 - One-on-one 

(2 Questions)

  • Q1. What are Turbines and its types?
  • Ans. 

    Turbines are machines that convert fluid energy into mechanical energy. There are four main types of turbines.

    • Turbines are used in power generation, aviation, and marine propulsion.

    • The four main types of turbines are steam, gas, hydro, and wind turbines.

    • Steam turbines are used in power plants to generate electricity.

    • Gas turbines are used in aviation and power generation.

    • Hydro turbines are used in hydroelectric power pl...

  • Answered by AI
  • Q2. Safety measures taken while executing civil works
  • Ans. 

    Safety measures are crucial during civil works to prevent accidents and injuries.

    • Conducting regular safety meetings and training sessions for workers

    • Providing personal protective equipment (PPE) such as hard hats, safety glasses, and gloves

    • Ensuring proper use of equipment and machinery

    • Implementing fall protection measures such as guardrails and safety harnesses

    • Maintaining a clean and organized work area to prevent trip...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - You will be asked about what experience you have, please prepare the topics and all the basics regarding it.

Interview Questionnaire 

1 Question

  • Q1. Gear types

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare Machine Design, SOM, TO, Thermo
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Basic manufacturing process
Round 2 - Technical 

(1 Question)

  • Q1. Batching plant and machinery
Round 3 - Technical 

(1 Question)

  • Q1. Batching plant and machinery
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Self introduction
  • Q2. Centrifugal pump
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in May 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Fire fiting HVAC System
  • Q2. How many pressure fire line
  • Ans. 

    The number of pressure fire lines can vary depending on the specific requirements of the system and facility.

    • The number of pressure fire lines is determined by the size and layout of the facility.

    • Pressure fire lines are typically installed in areas where there is a high risk of fire, such as industrial plants or commercial buildings.

    • The number of pressure fire lines may also be influenced by local fire safety regulatio...

  • Answered by AI
  • Q3. What is hvac requmamt neme
  • Ans. 

    HVAC requirements refer to the specifications and standards needed for heating, ventilation, and air conditioning systems in a building or facility.

    • HVAC requirements include proper sizing of equipment to meet the heating and cooling needs of a space

    • They also involve ensuring proper ventilation to maintain indoor air quality

    • Compliance with building codes and regulations is essential for HVAC systems

    • Regular maintenance a...

  • Answered by AI
  • Q4. How many sprlar tipe
  • Ans. 

    The question is unclear and does not make sense. It seems to be a typo or a mistake.

    • The question may be asking about a specific type of equipment or tool, but it is not clear.

    • It is important to ask for clarification or more information to provide an accurate answer.

    • Without more context, it is impossible to determine what 'sprlar tipe' refers to.

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Firefiting hvac Systems

SIMPLEX ENGINEERING & FOUNDRY WORKS Interview FAQs

How many rounds are there in SIMPLEX ENGINEERING & FOUNDRY WORKS Senior Engineer Mechanical interview?
SIMPLEX ENGINEERING & FOUNDRY WORKS interview process usually has 4 rounds. The most common rounds in the SIMPLEX ENGINEERING & FOUNDRY WORKS interview process are Technical, Resume Shortlist and HR.

Tell us how to improve this page.

People are getting interviews through

based on 1 SIMPLEX ENGINEERING & FOUNDRY WORKS interview
Job Portal
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.
Engineer
21 salaries
unlock blur

₹1.8 L/yr - ₹4.6 L/yr

Production Engineer
9 salaries
unlock blur

₹1.2 L/yr - ₹3.2 L/yr

Quality Engineer
9 salaries
unlock blur

₹1.4 L/yr - ₹3.3 L/yr

Junior Marketing Engineer
7 salaries
unlock blur

₹3.6 L/yr - ₹3.6 L/yr

CNC Operator
7 salaries
unlock blur

₹1 L/yr - ₹2.2 L/yr

Explore more salaries
Compare SIMPLEX ENGINEERING & FOUNDRY WORKS with

BHEL

4.2
Compare

Thermax Limited

4.2
Compare

Larsen & Toubro Limited

4.0
Compare

TCS

3.7
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview