Upload Button Icon Add office photos

Filter interviews by

SIMPLEX ENGINEERING & FOUNDRY WORKS Electrical Maintenance Engineer Interview Questions and Answers

Updated 4 Dec 2020

SIMPLEX ENGINEERING & FOUNDRY WORKS Electrical Maintenance Engineer Interview Experiences

1 interview found

Interview Questionnaire 

1 Question

  • Q1. I want to know about the job

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but was majorly a stress test. It lasted for about 1 hour 10 minutes. The interviewer wanted to test both my knowledge and communication skills. Most of the questions asked to me were related to my B.Tech curriculum i.e. computer science related topics. He stressed a lot on the basics related to my project topic. Luckily I was able to answer most of the questions correctly. I tried to answer each question with examples and also used props on the table (like pens, paperweights, pen stands etc.) to explain my theories. It was my first offcampus interview, and I think I did pretty well for a fresher. You need to stay calm and should apply presence of mind. Please go through the job description thoroughly word-by-word and recheck your resume to ensure that you are a best-fit for the position.

Interview questions from similar companies

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is electric current, how will be work MCB,how many types of short skt
  • Ans. 

    Electric current is the flow of electric charge. MCB is a safety device that automatically switches off the electrical circuit. There are different types of short circuits.

    • Electric current is the movement of electrons through a conductor.

    • MCB stands for Miniature Circuit Breaker and is used to protect electrical circuits from damage caused by overload or short circuit.

    • Short circuits occur when there is an unintended con...

  • Answered by AI
  • Q2. What is ckt ,what is current,what is resistant, what is voltage
  • Ans. 

    CKT is circuit, current is flow of electrons, resistance is opposition to flow, voltage is electrical potential difference.

    • CKT stands for circuit which is a closed loop through which electricity flows

    • Current is the flow of electrons in a circuit and is measured in amperes (A)

    • Resistance is the opposition to the flow of current and is measured in ohms (Ω)

    • Voltage is the electrical potential difference between two points i...

  • Answered by AI
  • Q3. What is power , why use relay in electric current
  • Ans. 

    Power is the rate at which energy is transferred. Relays are used to control high power circuits with low power signals.

    • Power is measured in watts and is the product of voltage and current

    • Relays are used to isolate high power circuits from low power control circuits

    • Relays can also be used to switch multiple circuits with a single control signal

    • Examples of relay applications include motor control, lighting control, and

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - If I have chance for doing job in it company so I will handle work nicely

I applied via Naukri.com and was interviewed in Feb 2022. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. What are your strengths and weaknesses?
  • Q2. Where do you see yourself in 5 year ?
  • Q3. Why are you looking for a change?

Interview Preparation Tips

Interview preparation tips for other job seekers - I am writing to apply for electrical maintenance engineer post in your service center. The position and responsibilities seems exciting and matching to my interest areas and career goal. I would to bring your attention to my key strengths for the job role.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is moter and it capacity
  • Ans. 

    A motor is a device that converts electrical energy into mechanical energy to perform work.

    • Motors are commonly used in various applications such as electric vehicles, industrial machinery, and household appliances.

    • They come in different types such as AC motors, DC motors, and stepper motors.

    • Motor capacity refers to its power rating, typically measured in horsepower (HP) or kilowatts (kW).

    • Higher capacity motors can gene...

  • Answered by AI
  • Q2. Moter is a mechanical part which convert electrical energy in to mechanical energy
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Why do you want to do job?
  • Q2. Why have you joined Electronics?
  • Q3. What is Ohm's law?
  • Ans. 

    Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points.

    • Ohm's law is represented by the equation I = V/R, where I is the current, V is the voltage, and R is the resistance.

    • It is named after Georg Simon Ohm, a German physicist who first formulated this law.

    • This law is applicable to all types of circuits, including DC and AC circuits.

    • It is use...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for AtkinsRealis Electrical Engineer interview:
  • IT
Interview preparation tips for other job seekers - I am one guy who is troubled for job I have done diploma in electrical branch. Due to not getting the right platform, I am busy on the job link.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Regarding your previous work experience
  • Q2. What are the internal testing of transformers
  • Ans. 

    Internal testing of transformers involves various tests to ensure proper functioning and safety.

    • Insulation resistance test to check for any insulation breakdown

    • Polarity test to verify correct connections

    • Turns ratio test to ensure proper voltage transformation

    • Winding resistance test to check for any short circuits or open circuits

    • Impedance test to determine the impedance of the transformer

    • Dielectric tests to assess the

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Try to concentrate on your work

Skills evaluated in this interview

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Commissioning activities,compressor commissioning knowledge.
  • Q2. MRT of pump knowledge

Interview Preparation Tips

Topics to prepare for L&T Energy Hydrocarbon Maintenance Engineer interview:
  • Rotary
Interview preparation tips for other job seekers - Project thew off end,properly planing all activities. Properly working of manpower,
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Dec 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. About youself? Role and responsibilities? why are you interested?
  • Ans. 

    I am an experienced Electrical Engineer with a passion for designing and implementing innovative solutions.

    • I have a strong background in electrical engineering, with a focus on power systems and control systems.

    • I have successfully designed and implemented electrical systems for various projects, including commercial buildings and industrial plants.

    • I am skilled in using CAD software for electrical design and have experi...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. About yourself? Role and responsibilities? day to day site work? what do u know about bechtel? Electrical safety? Drawing details?shop drawing? LOTO system? NC for quality and safety? Earthing system? powe...
Round 4 - HR 

(1 Question)

  • Q1. Documents? Current base salary? Expected base salary? Tentative date of joining?
  • Ans. 

    I can provide the required documents and discuss salary and joining details.

    • I can provide all necessary documents such as resume, certifications, and transcripts.

    • My current base salary is $X per year.

    • I expect a base salary in the range of $Y to $Z per year.

    • I am available to join within X weeks/months.

    • I can discuss further details during the interview.

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is CT and PT
  • Ans. 

    CT stands for Current Transformer and PT stands for Potential Transformer. They are used in electrical systems for measurement and protection purposes.

    • CT is used to measure current in high voltage circuits by stepping down the current to a safe level for measurement.

    • PT is used to measure voltage in high voltage circuits by stepping down the voltage to a safe level for measurement.

    • Both CT and PT are essential components...

  • Answered by AI
  • Q2. What is DTC structure
  • Ans. 

    DTC structure stands for Direct Torque Control structure, a control method used in AC motor drives for precise torque and speed control.

    • DTC structure is a control technique used in AC motor drives to directly control torque and flux without the need for a separate speed controller.

    • It is based on the principle of controlling the torque and flux by selecting the appropriate voltage vectors in the motor.

    • DTC structure offe...

  • Answered by AI
  • Q3. Use of LA, AB switch
  • Ans. 

    LA, AB switch is used in electrical engineering to switch between two different signal sources or destinations.

    • LA, AB switch is commonly used in audio and video equipment to switch between different inputs or outputs.

    • It allows for easy switching between two different signal sources or destinations without having to physically disconnect and reconnect cables.

    • The switch typically has two positions - one for each signal s...

  • Answered by AI

I applied via Walk-in and was interviewed in Oct 2021. There was 1 interview round.

Round 1 - HR 

(1 Question)

  • Q1. Tell me about your self
  • Ans. I had answered my family background and my experience
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - My interview was held in Bombay.Basically I had prepared for the interview with relate my technical question and my experience related question.

Tell us how to improve this page.

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.1k Interviews
L&T Construction Interview Questions
4.0
 • 676 Interviews
Siemens Interview Questions
4.1
 • 416 Interviews
Bosch Interview Questions
4.2
 • 325 Interviews
Thermax Limited Interview Questions
4.2
 • 233 Interviews
Cummins Interview Questions
4.3
 • 227 Interviews
AECOM Interview Questions
4.3
 • 109 Interviews
Apco Infratech Interview Questions
3.8
 • 108 Interviews
View all
Engineer
21 salaries
unlock blur

₹1.8 L/yr - ₹4.6 L/yr

Production Engineer
9 salaries
unlock blur

₹1.2 L/yr - ₹3.2 L/yr

Quality Engineer
9 salaries
unlock blur

₹1.4 L/yr - ₹3.3 L/yr

Junior Marketing Engineer
7 salaries
unlock blur

₹3.6 L/yr - ₹3.6 L/yr

CNC Operator
7 salaries
unlock blur

₹1 L/yr - ₹2.2 L/yr

Explore more salaries
Compare SIMPLEX ENGINEERING & FOUNDRY WORKS with

BHEL

4.2
Compare

Thermax Limited

4.2
Compare

Larsen & Toubro Limited

4.0
Compare

TCS

3.7
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview