Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by SHYAM METALICS AND ENERGY Team. If you also belong to the team, you can get access from here

SHYAM METALICS AND ENERGY Verified Tick

Compare button icon Compare button icon Compare
3.6

based on 800 Reviews

Filter interviews by

SHYAM METALICS AND ENERGY Project Engineer Mechanical Interview Questions and Answers for Experienced

Updated 3 Oct 2022

SHYAM METALICS AND ENERGY Project Engineer Mechanical Interview Experiences for Experienced

1 interview found

I applied via Walk-in and was interviewed before Oct 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technical discussion on different topics
  • Q2. Some questions are asked from previous work experiences and job roles as well

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep calm say what is relevant , answer should be brief

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is Six sigma in lean manufacturing
  • Ans. 

    Six Sigma is a methodology used in lean manufacturing to improve processes by reducing defects and variation.

    • Six Sigma aims to achieve a level of quality where there are only 3.4 defects per million opportunities.

    • It focuses on identifying and eliminating causes of defects to improve overall process efficiency.

    • Six Sigma uses statistical tools and techniques to measure and analyze process performance.

    • It involves defining...

  • Answered by AI
  • Q2. What is TPM and JH and its step
  • Ans. 

    TPM stands for Total Productive Maintenance and JH stands for Just in Time. TPM focuses on maintaining equipment to prevent breakdowns, while JH focuses on minimizing waste and improving efficiency.

    • TPM involves proactive maintenance to prevent breakdowns and improve overall equipment effectiveness

    • JH focuses on reducing waste, improving efficiency, and delivering products just in time to meet customer demand

    • TPM steps in...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared technically
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. How to allignment of mould
  • Ans. 

    Alignment of mould is crucial for ensuring proper functioning and quality of the final product.

    • Ensure mould components are properly assembled and secured

    • Use alignment tools such as dial indicators or laser alignment systems

    • Check for any misalignments or discrepancies and make necessary adjustments

    • Regularly inspect and maintain the mould to prevent misalignment issues

    • Consult with senior engineers or experts for guidance

  • Answered by AI
  • Q2. How to solve mould vibration problem
  • Ans. 

    To solve mould vibration problem, identify root cause, adjust machine settings, use vibration dampening materials, and regularly maintain equipment.

    • Identify the root cause of the vibration issue by inspecting the mould and surrounding equipment.

    • Adjust machine settings such as speed, pressure, and temperature to minimize vibration.

    • Use vibration dampening materials like rubber pads or mounts to reduce the impact of vibra...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. 1) tell me about your selfie
  • Ans. 

    I'm sorry, but I don't think I understand the question. Could you please clarify?

    • Answered by AI
    • Q2. 2) how to like this company
    • Q3. Are you interested in this company
    • Q4. Yes im interested i like this one company

    Interview Preparation Tips

    Topics to prepare for Bmm Ispat Mechanical Technician interview:
    • Total benificition plant
    • Wet screen work
    • Air Compressor
    Interview preparation tips for other job seekers - I am physically and technically improved .i am full filament for may job
    Interview experience
    4
    Good
    Difficulty level
    Moderate
    Process Duration
    Less than 2 weeks
    Result
    Selected Selected

    I applied via Company Website and was interviewed before Dec 2022. There were 3 interview rounds.

    Round 1 - Resume Shortlist 
    Pro Tip by AmbitionBox:
    Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
    View all tips
    Round 2 - Technical 

    (1 Question)

    • Q1. Mechanical Rolling Mill Related question.
    Round 3 - Technical 

    (1 Question)

    • Q1. Question related to quality
    Interview experience
    3
    Average
    Difficulty level
    -
    Process Duration
    -
    Result
    -
    Round 1 - Resume Shortlist 
    Pro Tip by AmbitionBox:
    Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
    View all tips
    Round 2 - Technical 

    (1 Question)

    • Q1. How many types GLD
    • Ans. 

      There are three types of GLD: GLD-1, GLD-2, and GLD-3.

      • GLD-1 is characterized by X symptom

      • GLD-2 is associated with Y condition

      • GLD-3 is known for Z feature

    • Answered by AI
    Round 3 - Group Discussion 

    Internal GLD EXTERNAL GLD

    Round 4 - Case Study 

    Coil leakage in induction furnce

    Interview experience
    1
    Bad
    Difficulty level
    Hard
    Process Duration
    Less than 2 weeks
    Result
    No response

    I applied via Recruitment Consulltant and was interviewed before Feb 2022. There were 2 interview rounds.

    Round 1 - Resume Shortlist 
    Pro Tip by AmbitionBox:
    Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
    View all tips
    Round 2 - One-on-one 

    (2 Questions)

    • Q1. Why pump shaft vibration monitoring required
    • Ans. 

      Pump shaft vibration monitoring is required to ensure smooth operation and prevent damage to the pump and its components.

      • Vibration monitoring helps detect any abnormalities in the pump's operation

      • Excessive vibration can cause damage to the pump and its components

      • Monitoring can help identify the root cause of vibration and prevent future issues

      • Regular monitoring can help extend the lifespan of the pump

      • Examples of monito...

    • Answered by AI
    • Q2. What is IBR welding in high pressure pipes
    • Ans. 

      IBR welding is a type of welding used in high pressure pipes that follows the guidelines set by the Indian Boiler Regulations.

      • IBR stands for Indian Boiler Regulations

      • IBR welding is a type of welding that follows the guidelines set by the Indian Boiler Regulations

      • It is used in high pressure pipes to ensure safety and quality

      • The welding process involves preheating the pipes, using specific electrodes, and following stric...

    • Answered by AI

    Interview Preparation Tips

    Interview preparation tips for other job seekers - 95% internal settings candidate reqruitment , either son of employee or BE/Dip candidate with experience from contract (Thermax). High goal candidate stability/ staying rate is very low. Only locals from nearby village and those struggling above 45 year of age. It's a Contract company of TATA (Logo Hired).
    Very cleaver management and lobbying interview selection.

    I applied via Walk-in and was interviewed in Jul 2021. There were 4 interview rounds.

    Interview Questionnaire 

    3 Questions

    • Q1. Department Related, Knowledge about computer,SAP,5s etc.
    • Q2. Id fan alignment,SRC specifications, Screen specifications, dimension,etc.
    • Q3. Production related, maintenance Bearing, maintenance gearbox, Belt drive,

    Interview Preparation Tips

    Interview preparation tips for other job seekers - It's tough interview schedule

    I applied via Referral and was interviewed in Jul 2021. There was 1 interview round.

    Interview Questionnaire 

    1 Question

    • Q1. Asking about submerged arc furnace, hydraulic system, air pollution control system

    Interview Preparation Tips

    Interview preparation tips for other job seekers - Be confident, speak what you know

    I applied via Referral and was interviewed in Oct 2020. There were 3 interview rounds.

    Interview Questionnaire 

    2 Questions

    • Q1. Tell me about yourself?
    • Ans. 

      I am a mechanical engineer with expertise in designing and analyzing mechanical systems.

      • I have a Bachelor's degree in Mechanical Engineering from XYZ University.

      • I have experience working with CAD software such as AutoCAD and SolidWorks.

      • I have successfully designed and implemented mechanical systems for various projects, including a robotic arm for industrial automation.

      • I am skilled in conducting stress and strain analy...

    • Answered by AI
    • Q2. What was your job description in previous company?
    • Ans. 

      I was responsible for designing and analyzing mechanical systems, conducting tests and experiments, and collaborating with cross-functional teams.

      • Designed and analyzed mechanical systems for various projects

      • Conducted tests and experiments to ensure the functionality and performance of the systems

      • Collaborated with cross-functional teams including electrical engineers and project managers

      • Provided technical support and tr...

    • Answered by AI

    Interview Preparation Tips

    Interview preparation tips for other job seekers - If Basic concept clear and confidential about your work than you will clear it.

    SHYAM METALICS AND ENERGY Interview FAQs

    How many rounds are there in SHYAM METALICS AND ENERGY Project Engineer Mechanical interview for experienced candidates?
    SHYAM METALICS AND ENERGY interview process for experienced candidates usually has 2 rounds. The most common rounds in the SHYAM METALICS AND ENERGY interview process for experienced candidates are Resume Shortlist and Technical.

    Tell us how to improve this page.

    People are getting interviews through

    based on 1 SHYAM METALICS AND ENERGY interview
    WalkIn
    100%
    Low Confidence
    ?
    Low Confidence means the data is based on a small number of responses received from the candidates.

    Interview Questions from Similar Companies

    Tata Steel Interview Questions
    4.1
     • 807 Interviews
    JSW Steel Interview Questions
    3.9
     • 551 Interviews
    Adani Power Interview Questions
    3.9
     • 198 Interviews
    NTPC Interview Questions
    4.2
     • 156 Interviews
    Coal India Interview Questions
    4.0
     • 58 Interviews
    Vedanta Limited Interview Questions
    3.9
     • 43 Interviews
    Tata Metaliks Interview Questions
    3.9
     • 38 Interviews
    View all
    SHYAM METALICS AND ENERGY Project Engineer Mechanical Salary
    based on 6 salaries
    ₹2.5 L/yr - ₹3.5 L/yr
    42% less than the average Project Engineer Mechanical Salary in India
    View more details

    SHYAM METALICS AND ENERGY Project Engineer Mechanical Reviews and Ratings

    based on 1 review

    3.0/5

    Rating in categories

    -

    Skill development

    -

    Work-Life balance

    -

    Salary & Benefits

    -

    Job Security

    -

    Company culture

    -

    Promotions/Appraisal

    -

    Work Satisfaction

    Explore 1 Review and Rating
    Engineer
    195 salaries
    unlock blur

    ₹2.1 L/yr - ₹5.6 L/yr

    Assistant Engineer
    188 salaries
    unlock blur

    ₹1.7 L/yr - ₹4.2 L/yr

    Senior Engineer
    155 salaries
    unlock blur

    ₹3.3 L/yr - ₹7.3 L/yr

    Assistant Manager
    153 salaries
    unlock blur

    ₹3.5 L/yr - ₹10 L/yr

    Junior Engineer
    71 salaries
    unlock blur

    ₹1.5 L/yr - ₹3.3 L/yr

    Explore more salaries
    Compare SHYAM METALICS AND ENERGY with

    Tata Steel

    4.1
    Compare

    JSW Steel

    3.9
    Compare

    Steel Authority Of India

    4.1
    Compare

    Jindal Steel and Power

    4.0
    Compare

    Calculate your in-hand salary

    Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
    Did you find this page helpful?
    Yes No
    write
    Share an Interview