Upload Button Icon Add office photos

Filter interviews by

Shree Nath Engineering Works Interview Questions and Answers

Updated 25 Feb 2025

Shree Nath Engineering Works Interview Experiences

Popular Designations

5 interviews found

Interview experience
2
Poor
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. What is the least count of Micro Meter and Vernier Caliper?
  • Ans. 

    The least count of a Micro Meter is 0.01 mm and the least count of a Vernier Caliper is 0.02 mm.

    • Least count of Micro Meter: 0.01 mm

    • Least count of Vernier Caliper: 0.02 mm

  • Answered by AI
  • Q2. MM- 0.01mm VC- 0.02mm DIGITAL VC- 0.01mm

Interview Preparation Tips

Interview preparation tips for other job seekers - If you are a beginner and you are more interested in learning than salary then this company is fine. Not suitable for experienced people or until you get a good opportunity.

Quaity Control Engineer Interview Questions asked at other Companies

Q1. How to make projection of I section and find strength of Isection?
View answer (1)
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Oct 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is the least count of vernier?
  • Ans. 

    The least count of a vernier scale is the smallest measurement that can be read on the scale.

    • The least count is determined by the number of divisions on the main scale and the vernier scale.

    • It is calculated as the difference between one smallest division on the main scale and one division on the vernier scale.

    • For example, if the main scale has divisions of 1 mm and the vernier scale has 10 divisions that cover 9 main s

  • Answered by AI
  • Q2. 0.02mm(AnalogVernier) 0.01mm(DigitalVernier)

Quality Engineer Interview Questions asked at other Companies

Q1. What is MSA and addition of msa version, type of msa ,what different between variable data and attibute data .why difine flase and miss rate calculate by msa .
View answer (10)
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is the least count of Vernier Caliper?
  • Ans. 

    The least count of Vernier Caliper is the smallest measurement that can be read on the scale.

    • The least count of a Vernier Caliper is typically 0.02 mm or 0.001 inches.

    • It is determined by the number of divisions on the main scale and the Vernier scale.

    • For example, if the main scale has 20 divisions and the Vernier scale has 18 divisions, the least count would be 0.02 mm.

  • Answered by AI

Quaity Control Engineer Interview Questions asked at other Companies

Q1. How to make projection of I section and find strength of Isection?
View answer (1)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Not Selected

I applied via Walk-in and was interviewed before Feb 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Are you looking for measuring instruments like Bore Gauge, Height Gauge, Micrometer, Vernier Caliper, PPG?
  • Ans. 

    Yes, I am familiar with and have experience using measuring instruments like Bore Gauge, Height Gauge, Micrometer, Vernier Caliper, and PPG.

    • I have used these instruments extensively in my previous roles as a Quality Engineer

    • I am familiar with the proper calibration and maintenance of these instruments

    • I understand the importance of accurate measurements in ensuring product quality

    • Examples of how I have used these instru...

  • Answered by AI
  • Q2. Do you study Mechenical Drawing?
  • Ans. 

    Yes, I have studied Mechanical Drawing.

    • I have taken courses in Mechanical Drawing during my engineering studies.

    • I am proficient in reading and interpreting technical drawings.

    • I have experience using CAD software to create and modify mechanical drawings.

    • I understand the importance of accurate and detailed drawings in ensuring quality in manufacturing processes.

  • Answered by AI
  • Q3. What is the information about 8d or CAPA?
  • Ans. 

    8D and CAPA are problem-solving methodologies used in quality management.

    • 8D stands for 8 Disciplines and is used to identify, correct and prevent problems

    • CAPA stands for Corrective and Preventive Action and is used to identify and eliminate the root cause of a problem

    • Both methodologies involve a structured approach to problem-solving and require documentation of the process and results

    • They are commonly used in industri...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - You just need to have knowledge of instruments and know how to read drawings.

Quality Engineer Interview Questions asked at other Companies

Q1. What is MSA and addition of msa version, type of msa ,what different between variable data and attibute data .why difine flase and miss rate calculate by msa .
View answer (10)

Shree Nath Engineering Works interview questions for popular designations

 Quaity Control Engineer

 (3)

 Quality Engineer

 (2)

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is the least count of micrometer?
  • Ans. 

    The least count of micrometer is 0.01 mm or 0.001 cm.

    • Least count is the smallest measurement that can be read on a measuring instrument.

    • Micrometer is used to measure small distances with high accuracy.

    • The least count of a micrometer depends on the number of divisions on the thimble and the pitch of the screw.

    • For example, if the thimble has 50 divisions and the pitch of the screw is 0.5 mm, then the least count would be

  • Answered by AI
  • Q2. What do you know about Gd&t?
  • Ans. 

    GD&T stands for Geometric Dimensioning and Tolerancing. It is a system used to define and communicate engineering tolerances.

    • GD&T is a language used to communicate design intent and engineering tolerances

    • It uses symbols, such as concentricity, perpendicularity, and flatness, to specify the allowable variation in a part's geometry

    • GD&T is used in industries such as aerospace, automotive, and manufacturing

    • It helps ensure ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Should be able to use and read instruments such as bore gauge, micrometer, vernier, height gauge, depth gauge, etc. Must know about Gd&t.

Skills evaluated in this interview

Quaity Control Engineer Interview Questions asked at other Companies

Q1. How to make projection of I section and find strength of Isection?
View answer (1)

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Nov 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Who is ELECTRONICS City of India?
  • Ans. 

    Electronics City is a major IT hub in Bangalore, India, housing numerous electronics and IT companies.

    • Electronics City is located in Bangalore, Karnataka, India.

    • It is spread over an area of 332 acres and is divided into three phases.

    • The city is home to many multinational companies, research institutions, and educational institutions.

    • Some of the prominent companies in Electronics City include Infosys, Wipro, Hewlett-Pac...

  • Answered by AI
  • Q2. Who is biggest mobile industry in India?
  • Ans. 

    The biggest mobile industry in India is Reliance Jio.

    • Reliance Jio is the largest mobile network operator in India.

    • It has a subscriber base of over 400 million as of 2021.

    • Reliance Jio disrupted the Indian telecom market with its affordable data plans and free voice calls.

    • It offers high-speed 4G internet services and has expanded into various digital services like JioTV, JioCinema, etc.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - 6'SIGMA

Interview Questionnaire 

2 Questions

  • Q1. Automation testing
  • Q2. Manual testing SQL

Interview Preparation Tips

Interview preparation tips for other job seekers - All the best for the interview
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What are the different ways to locate elements in web page
  • Ans. 

    Different ways to locate elements in a web page include using XPath, CSS selectors, ID, class name, tag name, and link text.

    • XPath: Allows you to navigate through the HTML structure of a web page.

    • CSS selectors: Can be used to target specific elements based on their attributes.

    • ID: Unique identifier for an element on a web page.

    • Class name: Used to group elements with similar styling.

    • Tag name: Targets elements based on the...

  • Answered by AI
  • Q2. How to work with list in Selenium
  • Ans. 

    Working with lists in Selenium involves locating elements, storing them in a list, and performing actions on them.

    • Locate elements using findElements() method

    • Store elements in a List

    • Iterate through the list to perform actions on each element

    • Example: List elements = driver.findElements(By.xpath("//ul/li"));

Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. How do you disagree to agree
  • Q2. Share faced challenges in team
  • Ans. 

    I faced challenges in team communication and conflicting priorities.

    • Miscommunication leading to delays in project timelines

    • Conflicting priorities causing tension within the team

    • Difficulty in aligning team members' goals and objectives

  • Answered by AI

Skills evaluated in this interview

Quality Engineer Interview Questions & Answers

HCLTech user image Abhishek kaushik

posted on 27 Jun 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Electric motor and transformers
  • Q2. What is quality
  • Ans. 

    Quality is the measure of excellence or superiority of a product or service.

    • Quality is meeting or exceeding customer expectations.

    • It involves consistency, reliability, and conformance to requirements.

    • Quality can be measured through metrics such as defect rates, customer satisfaction, and on-time delivery.

    • Continuous improvement is essential for maintaining and enhancing quality.

    • Examples of quality include a durable smar...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Introduction
Grammer

Round 2 - Technical 

(2 Questions)

  • Q1. What are your communication skills?
  • Ans. 

    I have strong communication skills, both written and verbal, and am able to effectively convey complex information to various stakeholders.

    • Excellent written communication skills demonstrated through detailed reports and documentation

    • Strong verbal communication skills shown through clear and concise explanations during team meetings

    • Ability to adapt communication style based on audience, whether it be technical or non-te...

  • Answered by AI
  • Q2. What position do you envision for yourself in five years?
  • Ans. 

    In five years, I envision myself as a Senior Quality Engineer leading a team of professionals in implementing innovative quality control measures.

    • Leading a team of quality engineers

    • Implementing innovative quality control measures

    • Continuing professional development to stay updated with industry trends

  • Answered by AI

Shree Nath Engineering Works Interview FAQs

How many rounds are there in Shree Nath Engineering Works interview?
Shree Nath Engineering Works interview process usually has 1-2 rounds. The most common rounds in the Shree Nath Engineering Works interview process are Technical and Resume Shortlist.
What are the top questions asked in Shree Nath Engineering Works interview?

Some of the top questions asked at the Shree Nath Engineering Works interview -

  1. Are you looking for measuring instruments like Bore Gauge, Height Gauge, Microm...read more
  2. What is the least count of Micro Meter and Vernier Calip...read more
  3. What is the information about 8d or CA...read more

Tell us how to improve this page.

Shree Nath Engineering Works Interview Process

based on 5 interviews

Interview experience

3.4
  
Average
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.6k Interviews
Accenture Interview Questions
3.8
 • 8.3k Interviews
Infosys Interview Questions
3.6
 • 7.6k Interviews
Wipro Interview Questions
3.7
 • 5.7k Interviews
Cognizant Interview Questions
3.7
 • 5.6k Interviews
Amazon Interview Questions
4.0
 • 5.1k Interviews
Capgemini Interview Questions
3.7
 • 4.8k Interviews
Tech Mahindra Interview Questions
3.5
 • 3.9k Interviews
HCLTech Interview Questions
3.5
 • 3.9k Interviews
Genpact Interview Questions
3.8
 • 3.2k Interviews
View all

Shree Nath Engineering Works Reviews and Ratings

based on 1 review

1.0/5

Rating in categories

1.0

Skill development

1.0

Work-life balance

1.0

Salary

1.0

Job security

1.0

Company culture

1.0

Promotions

1.0

Work satisfaction

Explore 1 Review and Rating
Quality Engineer
5 salaries
unlock blur

₹1.8 L/yr - ₹1.8 L/yr

Quaity Control Engineer
4 salaries
unlock blur

₹1.8 L/yr - ₹2.2 L/yr

Quality Controller
3 salaries
unlock blur

₹1.4 L/yr - ₹1.8 L/yr

Refrigeration Technician
3 salaries
unlock blur

₹4.8 L/yr - ₹6 L/yr

Explore more salaries
Compare Shree Nath Engineering Works with

TCS

3.7
Compare

Accenture

3.8
Compare

Wipro

3.7
Compare

Cognizant

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview