Upload Button Icon Add office photos

Filter interviews by

Shree Nath Engineering Works Quaity Control Engineer Interview Questions, Process, and Tips

Updated 25 Feb 2025

Top Shree Nath Engineering Works Quaity Control Engineer Interview Questions and Answers

Shree Nath Engineering Works Quaity Control Engineer Interview Experiences

3 interviews found

Interview experience
2
Poor
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. What is the least count of Micro Meter and Vernier Caliper?
  • Ans. 

    The least count of a Micro Meter is 0.01 mm and the least count of a Vernier Caliper is 0.02 mm.

    • Least count of Micro Meter: 0.01 mm

    • Least count of Vernier Caliper: 0.02 mm

  • Answered by AI
  • Q2. MM- 0.01mm VC- 0.02mm DIGITAL VC- 0.01mm

Interview Preparation Tips

Interview preparation tips for other job seekers - If you are a beginner and you are more interested in learning than salary then this company is fine. Not suitable for experienced people or until you get a good opportunity.
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is the least count of Vernier Caliper?
  • Ans. 

    The least count of Vernier Caliper is the smallest measurement that can be read on the scale.

    • The least count of a Vernier Caliper is typically 0.02 mm or 0.001 inches.

    • It is determined by the number of divisions on the main scale and the Vernier scale.

    • For example, if the main scale has 20 divisions and the Vernier scale has 18 divisions, the least count would be 0.02 mm.

  • Answered by AI

Quaity Control Engineer Interview Questions Asked at Other Companies

asked in Man Tubinox
Q1. How to make projection of I section and find strength of Isection ... read more
asked in Man Tubinox
Q2. If you have weigh of coil to find long pipe produced?
asked in SGS
Q3. How many pipe used in water project, name of the pipe?
Q4. Any knowledge about soldering and desoldering and resistors and e ... read more
Q5. Types of Measuring instruments What is power plant?? Types of pow ... read more
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is the least count of micrometer?
  • Ans. 

    The least count of micrometer is 0.01 mm or 0.001 cm.

    • Least count is the smallest measurement that can be read on a measuring instrument.

    • Micrometer is used to measure small distances with high accuracy.

    • The least count of a micrometer depends on the number of divisions on the thimble and the pitch of the screw.

    • For example, if the thimble has 50 divisions and the pitch of the screw is 0.5 mm, then the least count would be

  • Answered by AI
  • Q2. What do you know about Gd&t?
  • Ans. 

    GD&T stands for Geometric Dimensioning and Tolerancing. It is a system used to define and communicate engineering tolerances.

    • GD&T is a language used to communicate design intent and engineering tolerances

    • It uses symbols, such as concentricity, perpendicularity, and flatness, to specify the allowable variation in a part's geometry

    • GD&T is used in industries such as aerospace, automotive, and manufacturing

    • It helps ensure ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Should be able to use and read instruments such as bore gauge, micrometer, vernier, height gauge, depth gauge, etc. Must know about Gd&t.

Skills evaluated in this interview

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Dec 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. About Quality
  • Q2. What is the QMS
  • Ans. 

    QMS stands for Quality Management System. It is a set of policies, processes, and procedures required for planning and execution of quality control.

    • QMS ensures that products or services meet customer requirements and comply with regulations

    • It includes quality planning, quality control, quality assurance, and quality improvement

    • ISO 9001 is a widely recognized QMS standard

    • QMS is important for industries such as healthcar

  • Answered by AI
  • Q3. How to reduce a rejections and reworks
  • Ans. 

    To reduce rejections and reworks, implement a robust quality control system and focus on continuous improvement.

    • Implement a quality control system to catch defects early

    • Train employees on proper procedures and techniques

    • Conduct regular audits to identify areas for improvement

    • Analyze root causes of rejections and reworks to prevent future occurrences

    • Collaborate with suppliers to improve incoming materials quality

    • Utilize...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - About Quality control

Interview Questionnaire 

1 Question

  • Q1. Return type of web elements
  • Ans. 

    The return type of web elements is usually a string.

    • Web elements typically return a string value.

    • Examples of web elements include text boxes, buttons, and links.

    • The string value returned by a web element can be used for various purposes, such as verification or input manipulation.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Behaviour should be professional while interviewing the candidates.

Skills evaluated in this interview

I applied via Campus Placement and was interviewed in Aug 2021. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Self introduction, life cycle of software
  • Q2. Diff between black and white box testing
  • Ans. 

    Black box testing focuses on external behavior while white box testing focuses on internal structure.

    • Black box testing is based on functional requirements and does not require knowledge of internal code.

    • White box testing is based on internal code structure and requires knowledge of the code.

    • Black box testing is primarily used for system-level testing.

    • White box testing is primarily used for unit testing and code coverag...

  • Answered by AI
  • Q3. Programs on numbers and strings
  • Q4. Life cycle of software
  • Ans. 

    Software life cycle refers to the stages of software development from conception to retirement.

    • The life cycle includes planning, design, development, testing, deployment, and maintenance.

    • Each stage has specific goals and deliverables.

    • Examples of software life cycle models include Waterfall, Agile, and DevOps.

    • The life cycle can vary depending on the type of software being developed and the organization's processes.

    • Docum...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Answer confidently without any deviations from the questions.

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. About My expenses...
  • Ans. I have 2 year experience in Quality Engineering and production also @ Microtech Nashik & Sumangal's om sai plast Nashik .. I have currently working in Fresenius Kabi pune
  • Answered Anonymously
  • Q2. My short-term goals and long-term goals..
  • Ans. My short term goal is to get a job in a reputed company and long term goal is to achieve a good position like yours where I can build my career and help the organization too.
  • Answered Anonymously
  • Q3. Why Company Hiring me ?
  • Ans. I believe that my skills and experiences would be a strong fit for the team. I am excited about the opportunities for growth and development that your company offers. I am eager to contribute to the continued success and innovation that you've demonstrated over the years.
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Set weekly goals that you can control. A job searcher can't necessary control whether or not she obtains employment.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. What's your name
  • Q2. What's your privious company
  • Q3. My privious company name is Caparo engineering limited Pune
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Referral and was interviewed in Dec 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Question on API testing
  • Q2. Question on java

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well.all the best
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. 7 qc tool process audit first angle method, third angle method

Shree Nath Engineering Works Interview FAQs

How many rounds are there in Shree Nath Engineering Works Quaity Control Engineer interview?
Shree Nath Engineering Works interview process usually has 1-2 rounds. The most common rounds in the Shree Nath Engineering Works interview process are Technical and Resume Shortlist.
What are the top questions asked in Shree Nath Engineering Works Quaity Control Engineer interview?

Some of the top questions asked at the Shree Nath Engineering Works Quaity Control Engineer interview -

  1. What is the least count of Micro Meter and Vernier Calip...read more
  2. What is the least count of Vernier Calip...read more
  3. What is the least count of micromet...read more

Tell us how to improve this page.

Shree Nath Engineering Works Quaity Control Engineer Interview Process

based on 3 interviews

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.7k Interviews
Accenture Interview Questions
3.8
 • 8.3k Interviews
Infosys Interview Questions
3.6
 • 7.7k Interviews
Wipro Interview Questions
3.7
 • 5.7k Interviews
Cognizant Interview Questions
3.7
 • 5.7k Interviews
Amazon Interview Questions
4.0
 • 5.1k Interviews
Capgemini Interview Questions
3.7
 • 4.9k Interviews
HCLTech Interview Questions
3.5
 • 3.9k Interviews
Tech Mahindra Interview Questions
3.5
 • 3.9k Interviews
Genpact Interview Questions
3.8
 • 3.2k Interviews
View all
Shree Nath Engineering Works Quaity Control Engineer Salary
based on 4 salaries
₹1.8 L/yr - ₹2.2 L/yr
39% less than the average Quaity Control Engineer Salary in India
View more details
Quality Engineer
5 salaries
unlock blur

₹1.8 L/yr - ₹1.8 L/yr

Quaity Control Engineer
4 salaries
unlock blur

₹1.8 L/yr - ₹2.2 L/yr

Quality Controller
3 salaries
unlock blur

₹1.4 L/yr - ₹1.8 L/yr

Refrigeration Technician
3 salaries
unlock blur

₹4.8 L/yr - ₹6 L/yr

Explore more salaries
Compare Shree Nath Engineering Works with

TCS

3.7
Compare

Accenture

3.8
Compare

Wipro

3.7
Compare

Cognizant

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview