Add office photos
Filter interviews by
Shiva Construction Civil Site Engineer Interview Questions and Answers for Freshers
Shiva Construction Civil Site Engineer Interview Experiences for Freshers
1 interview found
(1 Question)
- Q1. Civil engineering drawing based calculation
(1 Question)
- Q1. Discussion on salary, location and work timings
Interview Preparation Tips
Interview questions from similar companies
I applied via Naukri.com and was interviewed in Sep 2023. There was 1 interview round.
(6 Questions)
- Q1. What is the concrete compensation what percentage
- Ans.
Concrete compensation percentage varies based on factors like experience, location, and company size.
Concrete compensation percentage can range from 5% to 20% of the total project cost.
Factors influencing concrete compensation percentage include experience level of the engineer, location of the project, and size of the company.
For example, a junior civil site engineer may receive a lower percentage compared to a senior...
- Q2. What is the concrete seting
- Ans.
Concrete setting is the process in which concrete hardens and gains strength over time.
Concrete setting is the transformation of concrete from a plastic state to a hardened state.
It involves a chemical reaction called hydration, where water reacts with the cement in the concrete mixture.
The setting time of concrete can vary depending on factors like temperature, humidity, and mix design.
Proper curing is essential to en...
- Q3. What is column cover size
- Ans.
Column cover size refers to the dimensions of the material used to cover or encase a structural column.
Column cover size is typically specified in terms of width, depth, and height.
It is important to consider the aesthetic and functional requirements when determining the column cover size.
Examples of column cover materials include metal, wood, stone, or composite materials.
Column cover size can vary depending on the de...
- Q4. What is size of parapet wall
- Ans.
The size of a parapet wall can vary depending on the specific design requirements and building codes.
The typical height of a parapet wall is around 3 feet, but it can be higher for safety reasons or aesthetic purposes.
The thickness of a parapet wall is usually around 8 inches to provide structural support.
The length of a parapet wall will depend on the length of the building facade it is protecting.
Parapet walls can be...
- Q5. What is the concrete ratio .very nic grade
- Ans.
Concrete ratio is the proportion of cement, sand, and aggregate in a concrete mix.
Concrete ratio is typically expressed as a ratio of cement:sand:aggregate, such as 1:2:4.
The ratio may vary depending on the strength and durability requirements of the concrete mix.
Common concrete ratios include 1:1.5:3, 1:2:4, and 1:3:6.
The grade of concrete (e.g. M20, M25) also determines the concrete ratio.
- Q6. What is the beam cover
- Ans.
Beam cover is the distance between the outer face of the concrete beam and the outer face of the column or slab.
Beam cover is important for protecting the reinforcement bars from corrosion and fire damage.
It also helps in providing adequate strength and durability to the structure.
The beam cover requirement may vary based on the type of structure and environmental conditions.
For example, in coastal areas where there is...
Interview Preparation Tips
- Civil .work interview nic perfor
Skills evaluated in this interview
Civil Site Engineer Interview Questions & Answers
Larsen & Toubro Limited
Anonymous
posted on 13 Nov 2023
Selected
I applied via Approached by Company and was interviewed in Oct 2023. There were 3 interview rounds.
(3 Questions)
- Q1. Civil engineering students
- Q2. Building constructions
- Q3. Civil engineering
Civil engineering building construction, metro project surveying
Interview Preparation Tips
Civil Site Engineer Interview Questions & Answers
Megha Engineering & Infrastructures
Anonymous
posted on 18 Oct 2024
Selected
I applied via Referral and was interviewed before Oct 2023. There was 1 interview round.
(3 Questions)
- Q1. Allowable wasteage of steel ?
- Ans.
Allowable wastage of steel in construction projects is typically around 2-3%.
Allowable wastage of steel is usually around 2-3% in construction projects.
Wastage can occur due to cutting, bending, and handling of steel bars.
Excessive wastage can lead to cost overruns and delays in construction.
Contractors should aim to minimize wastage through careful planning and efficient use of materials.
- Q2. Building construction process ?
- Ans.
Building construction process involves planning, designing, permitting, and construction phases.
Planning phase includes site selection, feasibility studies, and budgeting.
Designing phase involves architectural and structural design.
Permitting phase requires obtaining necessary approvals and permits from local authorities.
Construction phase includes site preparation, foundation work, structural framing, and finishing.
Qu...
- Q3. Quantity estimation of concrete,steel,earth work?
- Ans.
Quantity estimation of concrete, steel, and earthwork involves calculating the amount of materials needed for a construction project.
Calculate the volume of concrete required by multiplying the dimensions of the structure (length, width, height) and adding a suitable wastage factor.
Estimate the quantity of steel by determining the total length of bars needed based on the structural drawings and specifications.
For earth...
Civil Site Engineer Interview Questions & Answers
Kalpataru Projects International
Anonymous
posted on 30 Jun 2022
I applied via Referral and was interviewed in May 2022. There were 4 interview rounds.
Question related to civil engineering
(1 Question)
- Q1. What is the role of civil site engineer?
- Ans.
Civil site engineers are responsible for overseeing construction projects and ensuring they meet safety and quality standards.
Supervising construction projects
Ensuring compliance with safety and quality standards
Collaborating with architects and contractors
Managing budgets and timelines
Performing site inspections and surveys
Preparing reports and documentation
(2 Questions)
- Q1. Question related to my self.
- Q2. Question related to study.
Assignment of any RCC work which done on site.
Interview Preparation Tips
- RCC
- Bbs
- Quantity
I GULAM KHAJA, Civil engineer, I am intern on this company since last 7 month. I am very desparate about this job.
I applied via Naukri.com and was interviewed in Apr 2021. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. Technical, interpersonal & communication skills are mainly focussed at interview. So kindly do importance over the region.
Interview Preparation Tips
Atlease do some slight preparation for the interview.
Confirm twice whether the job completely suits you.
Give some Humble and honest answers all over the interview.
Selected
I applied via Approached by Company and was interviewed before Feb 2023. There were 2 interview rounds.
(2 Questions)
- Q1. How many years of experience in the construction company How much of plaster work size M20 grade of concrete ratio
- Ans.
The question asks about years of experience in a construction company, plaster work size, and M20 grade concrete ratio.
Years of experience in a construction company
Plaster work size
M20 grade concrete ratio
- Q2. I have 6 years experience in constructions pvt Ltd. Remaining years in other field
(1 Question)
- Q1. Any questions on technical and aptitude and sites work
Civil Site Engineer Interview Questions & Answers
Larsen & Toubro Limited
Anonymous
posted on 7 Oct 2021
Interview Questionnaire
2 Questions
- Q1. Many ques asking me in compay .. Size of brics and many .. More que
- Q2. Size of bricks
- Ans.
The size of bricks varies depending on the country and region they are used in.
In the United States, the standard size for bricks is 2 1/4 x 3 3/4 x 8 inches.
In the United Kingdom, the standard size for bricks is 65mm x 102.5mm x 215mm.
Bricks can also come in different shapes and sizes for specific purposes, such as bullnose bricks for rounded edges.
The size of bricks can affect the strength and stability of a structur...
Interview Preparation Tips
Civil Site Engineer Interview Questions & Answers
Megha Engineering & Infrastructures
Anonymous
posted on 19 Jul 2021
Interview Questionnaire
1 Question
- Q1. What is site engineer and supervisor
- Ans.
A site engineer is responsible for overseeing construction projects and ensuring they are completed according to plans and specifications. A supervisor is a higher-level position that manages and coordinates the work of site engineers and other construction personnel.
Site engineer: responsible for overseeing construction projects, ensuring compliance with plans and specifications
Supervisor: higher-level position that m...
Interview Questionnaire
1 Question
- Q1. Civil engineer salary
Interview Preparation Tips
Shiva Construction Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Civil Site Supervisor Interview Questions
- Civil Engineer Interview Questions
- Senior Civil Site Engineer Interview Questions
- Junior Engineer Civil Interview Questions
- Senior Civil Engineer Interview Questions
- Site Engineer Interview Questions
- Civil Foreman Interview Questions
- Civil Supervisor Interview Questions
- Show more
Civil Site Engineer Interview Questions from Similar Companies
Shiva Construction Civil Site Engineer Reviews and Ratings
based on 2 reviews
Rating in categories
|
Civil Site Engineer
14
salaries
|  ₹2.4 L/yr - ₹4 L/yr |
|
Accountant
6
salaries
| ₹1.9 L/yr - ₹3.2 L/yr |
|
Senior Engineer
4
salaries
| ₹3.6 L/yr - ₹6.2 L/yr |
|
Project Engineer
4
salaries
| ₹1.5 L/yr - ₹5.4 L/yr |
|
Junior Engineer
4
salaries
| ₹1.5 L/yr - ₹3 L/yr |
Larsen & Toubro Limited
Tata Projects
Hindustan Construction Company
Simplex Infrastructures
Calculate your in-hand salary
- Home >
- Interviews >
- Shiva Construction Interview Questions >
- Shiva Construction Civil Site Engineer Interview Questions for Fresher
