Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Sharda Motor Industries Team. If you also belong to the team, you can get access from here

Sharda Motor Industries Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Sharda Motor Industries Engineer Interview Questions and Answers

Updated 24 Apr 2024

Sharda Motor Industries Engineer Interview Experiences

2 interviews found

Engineer Interview Questions & Answers

user image Anonymous

posted on 24 Apr 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. What's the robots Axis
  • Ans. 

    The robot's axis refers to the number of degrees of freedom it has for movement.

    • The axis of a robot determines how many different ways it can move.

    • Common robot axes include 3-axis, 4-axis, 5-axis, and 6-axis.

    • More axes allow for more complex and precise movements.

    • Each axis corresponds to a specific direction of movement, such as up/down, left/right, or rotation.

  • Answered by AI
  • Q2. Cost of mig wire consumer
  • Ans. 

    The cost of mig wire can vary depending on factors such as brand, quality, and quantity purchased.

    • Cost of mig wire can range from $10 to $50 per spool, depending on brand and quality.

    • Buying in bulk can lower the cost per spool.

    • Higher quality mig wire may cost more upfront but can result in better welding results and less waste.

    • Comparison shopping and looking for sales or discounts can help save money on mig wire purcha

  • Answered by AI

Engineer Interview Questions & Answers

user image Anonymous

posted on 10 Dec 2022

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Basic details about your yourself
Round 3 - Technical 

(1 Question)

  • Q1. Interview question based on what you mentioned in resume nothing to difficult
Round 4 - One-on-one 

(1 Question)

  • Q1. Basic interview with management peoples

Interview Preparation Tips

Interview preparation tips for other job seekers - Speak to brave. Sounds like technically.they are asking only your previous company experience. Before atten the interview be prepare technically which position your applied.

Engineer Interview Questions Asked at Other Companies

asked in Eaton
Q1. ❖ If a team member is unable to carry out his work, he is doing i ... read more
Q2. What is inheritance? Show me by a code that shouldn't be a pseudo ... read more
asked in Qualcomm
Q3. What is Min-Cut placement algorithm? Given some block sizes, use ... read more
Q4. What is neutonian fluid ? , Stages of fracture, working of engine ... read more
Q5. What is normalization? What do you mean by 1NF, 2NF, 3NF, 4NF?

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Aug 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Technical
  • Q2. Procurement

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared

Interview Questionnaire 

1 Question

  • Q1. Basic electronics, about previous company, role & responsibility

I applied via Recruitment Consultant and was interviewed in Jul 2018. There were 6 interview rounds.

Interview Questionnaire 

7 Questions

  • Q1. They just asked related to the supervisor profile.
  • Q2. How u tackle the manpower and their concerns.
  • Ans. 

    I tackle manpower concerns by actively listening to their feedback, addressing issues promptly, and providing support and resources.

    • Regularly communicate with employees to understand their concerns

    • Address issues promptly and transparently

    • Provide necessary support and resources to help employees overcome challenges

    • Implement feedback mechanisms to continuously improve the work environment

    • Offer training and development op

  • Answered by AI
  • Q3. Asked about quality 7QC tools.
  • Q4. Asked about field related question.
  • Q5. Family background.
  • Q6. Manpower handling.
  • Q7. How u tackle maintainance issue.
  • Ans. 

    Maintenance issues are tackled by implementing a proactive approach and prioritizing tasks based on criticality.

    • Implement a preventive maintenance program

    • Regularly inspect equipment and facilities

    • Prioritize maintenance tasks based on criticality

    • Train staff on proper maintenance procedures

    • Document maintenance activities and track progress

    • Address issues promptly to prevent further damage

    • Consider outsourcing maintenance t

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: It was just related to that profile which they r searching for anyone who is searching for job should have a attractive resume it should be simple not too much complicated which can help u getting ur CV shortlisted.

Round: Test
Experience: Test is a combination of aptitude and psycho.
Aptitude was bit difficult they shortlist the candidate based on apti test .

General Tips: It was a great experience .
Job seekers should always be ready for interview and they should be confident about interview thats what matters.
Just give perfect answer of question dont try to make fool.
If u dont knw answer than directly say no.
This interview was a technical one . It lasted for about 1 hour 10 minutes. The interviewer wanted to test both my knowledge and communication skills
Skills: Communication, Body Language, Problem Solving, Leadership, Decision Making Skills
Duration: 1-4 weeks

I applied via Referral and was interviewed before Apr 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Written test

Round 3 - HR 

(1 Question)

  • Q1. Why should you hire you
  • Ans. There many reasons. Like experience, behaviour, dedication to word your work, finally work is worship.
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Knowage is power , so hire write people in write place

Interview Questionnaire 

1 Question

  • Q1. If radius is 8 so find out aria in circle
  • Ans. 

    The area of a circle with radius 8 is 201.06 square units.

    • Use the formula A = πr^2

    • Substitute r = 8

    • Calculate A = π(8)^2 = 201.06

  • Answered by AI

Interview Questionnaire 

2 Questions

  • Q1. Previous job company salary family background Why you want to join Mahindra
  • Ans. 

    I am motivated to join Mahindra due to its reputation for innovation and growth opportunities.

    • I am impressed by Mahindra's commitment to innovation and sustainability in the automotive industry.

    • I believe Mahindra offers excellent growth opportunities and a supportive work environment.

    • I am excited about the chance to work with a leading company like Mahindra and contribute to its success.

  • Answered by AI
  • Q2. Regarding vehicle testing

Interview Preparation Tips

Round: Resume Shortlist
Experience: Vehicle testing

I was interviewed before Jun 2016.

Interview Questionnaire 

1 Question

  • Q1.  Why Mechanical Engineering?
  • Ans. 

    I chose Mechanical Engineering because of my passion for designing and building machines that improve people's lives.

    • Fascination with how things work and desire to create innovative solutions

    • Interest in applying principles of physics and mathematics to real-world problems

    • Enjoyment of hands-on work and building physical prototypes

    • Desire to contribute to advancements in technology and industry

    • Examples: designing more eff...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Online. Related to courses of Design, MOS, TOM. Tough MCQ

I applied via Referral and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. What is the best attitude as an Engineer?

Interview Preparation Tips

Interview preparation tips for other job seekers - Great.

Sharda Motor Industries Interview FAQs

How many rounds are there in Sharda Motor Industries Engineer interview?
Sharda Motor Industries interview process usually has 2-3 rounds. The most common rounds in the Sharda Motor Industries interview process are One-on-one Round, Resume Shortlist and HR.
How to prepare for Sharda Motor Industries Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Sharda Motor Industries. The most common topics and skills that interviewers at Sharda Motor Industries expect are TPM, Fmea, Customer Quality, Costing and MSA.
What are the top questions asked in Sharda Motor Industries Engineer interview?

Some of the top questions asked at the Sharda Motor Industries Engineer interview -

  1. What's the robots A...read more
  2. Cost of mig wire consu...read more
  3. Basic interview with management peop...read more

Tell us how to improve this page.

Sharda Motor Industries Engineer Interview Process

based on 4 interviews

Interview experience

4.8
  
Excellent
View more
Sharda Motor Industries Engineer Salary
based on 102 salaries
₹2 L/yr - ₹5.5 L/yr
29% less than the average Engineer Salary in India
View more details

Sharda Motor Industries Engineer Reviews and Ratings

based on 20 reviews

3.7/5

Rating in categories

3.2

Skill development

2.8

Work-life balance

3.1

Salary

3.9

Job security

2.7

Company culture

2.8

Promotions

3.0

Work satisfaction

Explore 20 Reviews and Ratings
Senior Engineer
183 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
145 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
119 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
102 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
91 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Sharda Motor Industries with

Bharat Forge

3.9
Compare

Samvardhana Motherson Group

3.7
Compare

Mahindra & Mahindra

4.1
Compare

Tata Motors

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview