i
Sharda Motor Industries
Filter interviews by
I appeared for an interview in Feb 2025, where I was asked the following questions.
I applied via Walk-in and was interviewed in Aug 2022. There were 2 interview rounds.
Measurement in quality departments involves various tools and techniques to ensure the reliability and safety of automobiles.
Quality departments use various measurement tools such as calipers, micrometers, and gauges to measure the dimensions of automotive parts.
Statistical process control (SPC) is used to monitor and control the manufacturing process to ensure consistent quality.
Non-destructive testing (NDT) technique...
I applied via Walk-in and was interviewed before Aug 2022. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Apr 2021. There were 3 interview rounds.
Sharda Motor Industries interview questions for designations
Top trending discussions
I applied via Recruitment Consultant and was interviewed in Oct 2020. There were 3 interview rounds.
GD&T symbols are used to specify geometric tolerances on engineering drawings.
GD&T stands for Geometric Dimensioning and Tolerancing
It is a system of symbols used to specify the allowable variation in form and size of features on a part
Examples of GD&T symbols include: flatness, perpendicularity, concentricity, and position
GD&T is important for ensuring parts are manufactured to the correct specifications and fit toget
True position on CMM can be checked using a combination of software and hardware tools.
Use a calibrated probe to measure the feature location
Compare the measured location with the nominal location
Calculate the deviation and compare it with the tolerance
Use software tools like GD&T to analyze the results
Ensure the CMM is calibrated and the probe is in good condition
FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identify and prevent potential failures in a process or product.
FMEA is used to identify potential failures in a process or product and their effects on the system.
It involves analyzing the likelihood of failure, severity of the consequences, and the ability to detect the failure before it occurs.
FMEA is commonly used in industries such a...
Instrument selection involves identifying the appropriate tools and equipment for a specific task or process.
Identify the purpose of the instrument
Consider the accuracy and precision required
Evaluate the cost and availability
Ensure the instrument is compatible with other equipment
Consider the maintenance and calibration requirements
I applied via Naukri.com and was interviewed before Oct 2021. There were 2 interview rounds.
posted on 10 Jan 2022
I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.
TBO stands for Time Between Overhaul in coupler, which is the time interval between two overhauls of a coupler.
TBO is a maintenance term used in the aviation industry.
It refers to the time interval between two overhauls of a coupler.
During an overhaul, the coupler is disassembled, inspected, repaired, and reassembled.
The TBO for a coupler depends on the manufacturer's recommendations and the coupler's usage.
Exceeding t...
Quality is meeting or exceeding customer expectations and requirements.
Quality is a measure of how well a product or service meets customer needs and expectations.
It involves meeting or exceeding customer requirements and specifications.
Quality can be measured through various metrics such as defect rates, customer satisfaction, and reliability.
Quality is a continuous process that involves identifying and addressing are...
Poka yoke is a quality control technique used to prevent errors or defects in a process.
Poka yoke aims to eliminate mistakes by designing processes or systems that make errors impossible or immediately detectable.
It involves implementing foolproof mechanisms, such as sensors, alarms, or physical barriers, to prevent or correct errors.
For example, a poka yoke in a manufacturing line could be a sensor that detects if a c...
Statistical Process Control (SPC) is a quality tool used to monitor and control processes to ensure they are within acceptable limits.
SPC involves collecting and analyzing data to identify and eliminate sources of variation in a process.
Control charts are commonly used in SPC to visually display process data and identify any trends or patterns.
Examples of SPC tools include histograms, Pareto charts, scatter diagrams, a
Cp and Cpk are statistical tools used to measure process capability and determine if a process is capable of producing products within specification limits.
Cp measures the potential capability of a process to meet specifications
Cpk measures the actual capability of a process to meet specifications
Both Cp and Cpk are calculated using the process mean and standard deviation, as well as the upper and lower specification l...
SPC stands for Statistical Process Control. It is a method used to monitor and control processes to ensure they are operating within acceptable limits.
SPC involves collecting and analyzing data to identify and reduce process variation.
It helps in detecting and preventing defects or errors in a process.
Control charts are commonly used in SPC to visually display process data and identify any trends or patterns.
SPC can be...
I applied via Walk-in and was interviewed in Jan 2021. There were 3 interview rounds.
I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 4 interview rounds.
based on 5 interviews
Interview experience
based on 22 reviews
Rating in categories
Senior Engineer
182
salaries
| ₹1.9 L/yr - ₹8.4 L/yr |
Assistant Manager
135
salaries
| ₹4.5 L/yr - ₹11 L/yr |
Production Engineer
128
salaries
| ₹1.2 L/yr - ₹6.3 L/yr |
Engineer
103
salaries
| ₹2 L/yr - ₹5.5 L/yr |
Quality Engineer
91
salaries
| ₹1.5 L/yr - ₹4.8 L/yr |
JBM Group
Subros
Endurance Technologies
Spark Minda