i
Sharda Motor Industries
Filter interviews by
SMED stands for Single-Minute Exchange of Die. It is a lean manufacturing technique used to reduce setup time in production processes.
SMED aims to minimize the time required to change a machine or process from running one product to another.
It involves separating internal and external setup tasks, converting internal tasks to external ones, and streamlining the overall process.
By implementing SMED, companies can increa...
VSM stands for Value Stream Mapping. It is a lean management tool used to analyze and improve the flow of materials and information in a process.
VSM is used to identify waste and bottlenecks in a process
It helps in visualizing the current state and designing the future state of the process
In a press shop, VSM can be implemented by mapping the flow of materials from raw material to finished product, identifying areas of...
Yes, I am familiar with PPAP and its documents.
PPAP stands for Production Part Approval Process
It is a standardized process in the automotive industry for ensuring quality and consistency in parts production
PPAP documents include items such as control plans, FMEAs, and measurement system analysis
I have experience creating and reviewing PPAP documents in my previous roles
Quality defects in press parts
Identify root cause of defects
Implement corrective actions
Ensure proper maintenance of press machines
Train operators on quality control
Perform regular inspections and testing
Quality defects in weld shop
Identify root cause of defects
Implement corrective actions
Train welders on proper techniques
Regularly inspect equipment and materials
Establish quality control procedures
Collaborate with quality assurance team
Defect causes in press part
Improper die design
Incorrect material selection
Inadequate lubrication
Misalignment of press components
Worn out or damaged tooling
Inconsistent press settings
Operator error
Environmental factors
Cracks and thinning in production can be caused by various factors such as material defects, improper welding techniques, or excessive stress.
Identify the root cause of the issue through thorough inspection and analysis
Implement corrective actions such as adjusting welding parameters or changing materials
Ensure proper maintenance and monitoring to prevent future occurrences
Examples of causes include improper heat treat...
I applied via Naukri.com and was interviewed in Dec 2021. There were 12 interview rounds.
Top trending discussions
I applied via Walk-in and was interviewed before May 2021. There were 4 interview rounds.
Group discussed on Di
scipline spelling topic and explain
I applied via Job Fair and was interviewed before Mar 2021. There were 4 interview rounds.
Topic for discussion
My strengths include problem-solving, attention to detail, and strong technical skills. My weaknesses include being overly critical of my own work and sometimes struggling with delegation.
Strength: Problem-solving - I enjoy analyzing complex problems and finding efficient solutions.
Strength: Attention to detail - I have a meticulous approach to my work, ensuring accuracy and quality.
Strength: Strong technical skills - ...
I applied via Walk-in and was interviewed before Sep 2020. There was 1 interview round.
I am a production engineer with experience in optimizing manufacturing processes and ensuring efficient production.
Experienced production engineer
Skilled in optimizing manufacturing processes
Ensuring efficient production
Strong knowledge of production equipment and technologies
Proficient in analyzing data and implementing improvements
Collaborative team player
I was a Senior Production Engineer in my previous company.
I held the position of Senior Production Engineer.
I was responsible for overseeing production processes and ensuring efficiency.
I worked closely with the production team to identify and resolve any issues.
I implemented improvements to optimize production output and reduce costs.
I collaborated with other departments to coordinate production schedules and meet dea...
As a Production Engineer, my role is to oversee the manufacturing process, optimize production efficiency, and ensure quality control.
Overseeing the manufacturing process
Optimizing production efficiency
Ensuring quality control
Identifying and resolving production issues
Implementing process improvements
Collaborating with cross-functional teams
Monitoring production metrics and analyzing data
Creating and maintaining produc
DFT in painting stands for Dry Film Thickness.
DFT is the thickness of the paint film after it has dried.
It is measured using a coating thickness gauge.
The DFT is important for ensuring proper protection and appearance of the painted surface.
For example, a coating may require a minimum DFT of 2 mils to provide adequate corrosion protection.
DFT can also affect the drying time and curing of the paint.
Dry film thickness refers to the thickness of a coating after it has dried and cured.
It is measured using a coating thickness gauge.
It is important to ensure that the dry film thickness meets the specifications for the coating.
The dry film thickness can affect the performance and durability of the coating.
Examples of coatings that require specific dry film thickness include paint, powder coating, and plating.
Dry film t...
Excess DFT can lead to increased cost and longer production time.
Excess DFT can lead to increased material usage and waste.
It can also lead to longer production time and increased cost.
The excess DFT may also affect the performance and durability of the product.
It is important to ensure that the DFT is within the specified range to avoid these issues.
I applied via Job Fair and was interviewed before Mar 2021. There were 2 interview rounds.
I am graduation in Mechanical Engineering and also done my diploma mechanical automobile in ghaziabad
I applied via Job Fair and was interviewed before Mar 2021. There were 2 interview rounds.
I am graduation in Mechanical Engineering and also done my diploma mechanical automobile in ghaziabad
I applied via Campus Placement and was interviewed before Mar 2021. There were 3 interview rounds.
I have a strong background in production engineering and a proven track record of improving efficiency and reducing costs.
I have a Bachelor's degree in Production Engineering and have completed internships at two leading manufacturing companies.
I have successfully implemented process improvements that resulted in a 20% increase in production output at my previous job.
I am skilled in using various production software an...
I applied via Recruitment Consulltant and was interviewed in May 2023. There were 3 interview rounds.
I applied via Recruitment Consulltant and was interviewed in May 2023. There were 3 interview rounds.
based on 1 interview
Interview experience
based on 31 reviews
Rating in categories
Senior Engineer
182
salaries
| ₹1.9 L/yr - ₹8.4 L/yr |
Assistant Manager
135
salaries
| ₹4.5 L/yr - ₹11 L/yr |
Production Engineer
128
salaries
| ₹1.2 L/yr - ₹6.3 L/yr |
Engineer
103
salaries
| ₹2 L/yr - ₹5.5 L/yr |
Quality Engineer
91
salaries
| ₹1.5 L/yr - ₹4.8 L/yr |
JBM Group
Subros
Endurance Technologies
Spark Minda