AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
SBR Group Interview Questions and Answers
9 Interview questions
HT fuse is thin because it is designed to handle high voltage, while LT fuse is fat because it is designed to handle high current.
HT fuse is designed to handle high voltage, so it needs to be thin to prevent arcing.
LT fuse is designed to handle high current, so it needs to be fat to handle the flow of electricity.
Different types of fuses are designed for specific voltage and current ratings.
Example: HT fuse may be...
PT slab stands for post-tensioned slab, a type of concrete slab reinforced with high-strength steel tendons.
PT slab is a type of concrete slab that uses high-strength steel tendons to apply compression after the concrete has hardened.
The tendons are placed in ducts or sleeves within the concrete slab and then tensioned to provide additional strength and reduce cracking.
PT slabs are commonly used in large span stru...
RMC pouring time refers to the duration it takes to pour ready-mix concrete at a construction site.
RMC pouring time can vary depending on factors such as the volume of concrete needed, the distance from the mixing plant to the site, and the complexity of the project.
Typically, RMC pouring time ranges from a few hours to a full day for larger projects.
Efficient planning and coordination are essential to ensure that...
The rectification process for hollow laid tiles involves removing the hollow tiles, cleaning the surface, applying fresh adhesive, and re-laying the tiles.
Identify the hollow tiles by tapping them with a rubber mallet.
Carefully remove the hollow tiles without damaging the surrounding tiles.
Clean the surface thoroughly to remove any adhesive residue.
Apply fresh adhesive to the cleaned surface.
Re-lay the tiles ensur...
The size of a solid concrete block can vary depending on its intended use and manufacturer.
Standard sizes for solid concrete blocks are 8x8x16 inches or 4x8x16 inches
Blocks can also be custom made to specific dimensions
Size may also vary based on the type of construction project
A section of beam and slab typically consists of a horizontal slab supported by vertical beams. The depth of the beam is determined based on structural requirements.
The beam is typically deeper than the slab to provide adequate strength and support
The depth of the beam is determined based on factors such as span length, load requirements, and structural design
Reinforcement bars are often used in both the beam and ...
The density of concrete varies depending on the mix, but typically ranges from 2200 to 2500 kg/m³.
Density of concrete is measured in kg/m³
The density of concrete varies depending on the mix of materials used
Typically, the density of concrete ranges from 2200 to 2500 kg/m³
Higher density concrete is used for structures that require greater strength and durability
Concrete blocks come in various sizes depending on their intended use.
Standard concrete blocks measure 8 inches by 8 inches by 16 inches.
However, there are also smaller blocks that measure 4 inches by 8 inches by 16 inches.
Larger blocks are also available for specific purposes such as retaining walls.
The size of concrete blocks can also vary depending on the country or region.
It is important to choose the appropri...
A cross section of a slab and beam shows the structural details of the elements.
Draw a horizontal line to represent the ground level.
Draw the slab thickness and beam depth to scale above the ground line.
Add reinforcement bars and stirrups to the slab and beam.
Label the dimensions and materials used.
Indicate the direction of the load and the support conditions.
SBR Group Interview Experiences
6 interviews found
Anonymous
Selected
I applied via Referral and was interviewed before Oct 2022. There were 2 interview rounds.
(4 Questions)
- Q1. What is size of solid concrete block
- Ans.
The size of a solid concrete block can vary depending on its intended use and manufacturer.
Standard sizes for solid concrete blocks are 8x8x16 inches or 4x8x16 inches
Blocks can also be custom made to specific dimensions
Size may also vary based on the type of construction project
- Q2. Draw a section of beam and slab? Mention the depth of beam
- Ans.
A section of beam and slab typically consists of a horizontal slab supported by vertical beams. The depth of the beam is determined based on structural requirements.
The beam is typically deeper than the slab to provide adequate strength and support
The depth of the beam is determined based on factors such as span length, load requirements, and structural design
Reinforcement bars are often used in both the beam and slab ...
- Q3. Different types of Tiles
- Ans.
Tiles are commonly used for flooring and wall covering, available in various materials and designs.
Ceramic tiles: most common type, made from clay and minerals, durable and easy to clean
Porcelain tiles: similar to ceramic but denser and less porous, suitable for high traffic areas
Natural stone tiles: includes marble, granite, limestone, and travertine, offer unique patterns and textures
Glass tiles: modern and stylish o...
- Q4. What is rectification process if laid tiles are hollow
- Ans.
The rectification process for hollow laid tiles involves removing the hollow tiles, cleaning the surface, applying fresh adhesive, and re-laying the tiles.
Identify the hollow tiles by tapping them with a rubber mallet.
Carefully remove the hollow tiles without damaging the surrounding tiles.
Clean the surface thoroughly to remove any adhesive residue.
Apply fresh adhesive to the cleaned surface.
Re-lay the tiles ensuring t...
Deputy Administration and Facilities Manager Interview Questions & Answers
AGAM PRASAD BADAJENA
posted on 12 May 2025
- Q1. What is roles and responsibilities of admin
- Q2. What's statutory compliance requirements
(1 Question)
- Q1. HT fuse thin and lt fuse fat why
- Ans.
HT fuse is thin because it is designed to handle high voltage, while LT fuse is fat because it is designed to handle high current.
HT fuse is designed to handle high voltage, so it needs to be thin to prevent arcing.
LT fuse is designed to handle high current, so it needs to be fat to handle the flow of electricity.
Different types of fuses are designed for specific voltage and current ratings.
Example: HT fuse may be used...
satish Kd
(2 Questions)
- Q1. What is pt slab?
- Ans.
PT slab stands for post-tensioned slab, a type of concrete slab reinforced with high-strength steel tendons.
PT slab is a type of concrete slab that uses high-strength steel tendons to apply compression after the concrete has hardened.
The tendons are placed in ducts or sleeves within the concrete slab and then tensioned to provide additional strength and reduce cracking.
PT slabs are commonly used in large span structure...
- Q2. What is the RMC pouring time?
- Ans.
RMC pouring time refers to the duration it takes to pour ready-mix concrete at a construction site.
RMC pouring time can vary depending on factors such as the volume of concrete needed, the distance from the mixing plant to the site, and the complexity of the project.
Typically, RMC pouring time ranges from a few hours to a full day for larger projects.
Efficient planning and coordination are essential to ensure that the ...
I applied via Naukri.com and was interviewed in May 2022. There were 3 interview rounds.
(1 Question)
- Q1. Work procedure for each & every activity , Experience about Aluminum method of shuttering finishing of project.
(2 Questions)
- Q1. About family, location of current house, notice period need to change relocate near to working site.
- Q2. Salary discussion, Final procedure
Interview Preparation Tips
I applied via Referral and was interviewed before Aug 2021. There was 1 interview round.
(3 Questions)
- Q1. Draw the Cross section of Slab and Beam
- Ans.
A cross section of a slab and beam shows the structural details of the elements.
Draw a horizontal line to represent the ground level.
Draw the slab thickness and beam depth to scale above the ground line.
Add reinforcement bars and stirrups to the slab and beam.
Label the dimensions and materials used.
Indicate the direction of the load and the support conditions.
- Q2. What is size of concrete blocks and their size ?
- Ans.
Concrete blocks come in various sizes depending on their intended use.
Standard concrete blocks measure 8 inches by 8 inches by 16 inches.
However, there are also smaller blocks that measure 4 inches by 8 inches by 16 inches.
Larger blocks are also available for specific purposes such as retaining walls.
The size of concrete blocks can also vary depending on the country or region.
It is important to choose the appropriate s...
- Q3. What is the density of Concrete
- Ans.
The density of concrete varies depending on the mix, but typically ranges from 2200 to 2500 kg/m³.
Density of concrete is measured in kg/m³
The density of concrete varies depending on the mix of materials used
Typically, the density of concrete ranges from 2200 to 2500 kg/m³
Higher density concrete is used for structures that require greater strength and durability
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Company Website and was interviewed before Jun 2021. There were 2 interview rounds.
First round was coding as well as aptitude done together went well I guess focusing on codes helps a lot.
(1 Question)
- Q1. 2nd round included tr and mr round went quite enegritic
Interview Preparation Tips
I applied via Naukri.com
Interview Questionnaire
2 Questions
- Q1. Why Amazon?
- Q2. What do you expect from Amazon?
- Ans.
I expect Amazon to foster innovation, provide growth opportunities, and maintain a customer-centric culture.
Opportunities for professional development, such as training programs and mentorship.
A collaborative work environment that encourages teamwork and idea sharing.
Access to cutting-edge technology and resources to drive innovation.
A strong focus on customer satisfaction, ensuring that every decision prioritizes the ...
Interview Preparation Tips
Interview Questionnaire
2 Questions
- Q1. Technical
- Q2. Be yourself
I applied via Recruitment Consulltant and was interviewed before Jul 2021. There was 1 interview round.
(1 Question)
- Q1. *Introduce yourself *Purpose of working in the Company *Educational Background *Family Background *Goals and Ambition
- Ans.
Experienced professional with a strong educational background and clear career ambitions, eager to contribute to the company's success.
I have over 5 years of experience in project management, leading teams to successfully deliver complex projects on time.
I hold a Master's degree in Business Administration from XYZ University, where I specialized in strategic management.
My family has always emphasized the importance of ...
Interview Preparation Tips
SBR Group Interview FAQs
Tell us how to improve this page.
SBR Group Interviews By Designations
- SBR Group Deputy Administration and Facilities Manager Interview Questions
- SBR Group Project Manager Civil Interview Questions
- SBR Group Electrician Interview Questions
- SBR Group QA QC Engineer Interview Questions
- SBR Group Site Engineer Interview Questions
- SBR Group Project Engineer - Civil Interview Questions
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 4 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
SBR Group Reviews and Ratings
based on 26 reviews
Rating in categories
|
MEP Manager
7
salaries
|  ₹9 L/yr - ₹12 L/yr |
|
Civil Site Engineer
7
salaries
| ₹2.2 L/yr - ₹6 L/yr |
|
Senior Site Engineer
7
salaries
| ₹5.5 L/yr - ₹7.5 L/yr |
|
Store Incharge
6
salaries
| ₹5 L/yr - ₹6.4 L/yr |
|
Project Engineer
5
salaries
| ₹4 L/yr - ₹6.2 L/yr |
TCS
Accenture
Wipro
Cognizant
- Home >
- Interviews >
- SBR Group Interview Questions
