Filter interviews by
I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 6 interview rounds.
Nitrogen gas is commonly used for hot/live tapping in mechanical engineering.
Nitrogen gas is inert and non-reactive, making it safe to use in hot/live tapping processes.
It helps to create a protective atmosphere to prevent explosions or fires.
Nitrogen gas is readily available and cost-effective.
Other gases like argon or carbon dioxide can also be used depending on the specific requirements.
Various methods can be used for railway/road/river crossings depending on the location and other factors.
Bridges can be built over the crossing
Tunnels can be dug under the crossing
Level crossings can be used for roads
Flyovers can be constructed for roads
Ferries can be used for river crossings
Aqueducts can be built for waterways
Location, traffic volume, and safety considerations must be taken into account when choosing
The procedure for pipe lines welding while route and filling involves several steps.
Clean the area to be welded thoroughly
Tack weld the pipes together
Weld the root pass
Fill the remaining gap with weld metal
Perform post-weld heat treatment if required
Inspect the weld for defects
RT, UT, and magnetic partials are non-destructive testing methods used in engineering.
RT stands for Radiographic Testing and uses X-rays or gamma rays to inspect the internal structure of a material.
UT stands for Ultrasonic Testing and uses high-frequency sound waves to detect flaws or defects in a material.
Magnetic particle testing uses magnetic fields and iron particles to detect surface and slightly subsurface defec...
What IS API 5L
What is ASME B 16.5
What is ASME IX
Whatbis ASME B 31.4
I applied via Approached by Company and was interviewed in Apr 2024. There was 1 interview round.
I applied via Company Website and was interviewed in Mar 2024. There were 3 interview rounds.
Related to Data entry , Safety and Inventory
Mechanical items can be identified by their moving parts and physical structure, while electrical items can be identified by wires, circuits, and power sources.
Mechanical items typically have moving parts such as gears, levers, or pistons.
Electrical items often have wires, circuits, and power sources like batteries or plugs.
Mechanical items may require manual operation, while electrical items may require electricity to...
The number of valves in the warehouse varies depending on the equipment and inventory being stored.
The number of valves in the warehouse can range from a few dozen to hundreds or even thousands, depending on the size and type of inventory.
Valves may be stored in different sections of the warehouse based on their size, material, and usage.
It is important for the Warehouse Incharge to keep track of the inventory of valve...
Ball valves are commonly used in industrial applications for controlling the flow of liquids or gases.
Ball valves have a spherical closure unit that allows for quick on/off control of flow.
They are durable and reliable, making them suitable for high-pressure applications.
Ball valves are easy to operate and require minimal maintenance.
Examples of industries where ball valves are used include oil and gas, water treatment
AC gas can be filled by connecting a refrigerant cylinder to the AC system and following proper procedures.
Ensure the AC system is turned off before filling the gas.
Locate the low-pressure service port on the AC system.
Connect the refrigerant cylinder to the service port.
Follow the manufacturer's instructions for filling the gas to the correct pressure.
Monitor the pressure gauge while filling the gas to avoid overfilli...
Material required, loading and delivery policy
Saudi Aramco interview questions for popular designations
I applied via Recruitment Consulltant and was interviewed before Dec 2023. There were 2 interview rounds.
The salary range for a welder can vary depending on factors such as experience, location, and industry.
Salary range can vary from $30,000 to $70,000 per year.
Factors influencing salary include experience level, certifications, and type of welding performed.
Welders in industries like aerospace or underwater welding may earn higher salaries.
Location can also impact salary, with welders in high-cost-of-living areas typica
The typical salary of a steel fabricator can vary depending on factors such as experience, location, and employer.
Salaries for steel fabricators can range from $30,000 to $60,000 per year.
Experience level and certifications can impact salary potential.
Location plays a role in salary, with higher wages typically found in metropolitan areas.
Employers in industries such as construction or manufacturing may offer competiti
Get interview-ready with Top Saudi Aramco Interview Questions
I applied via Company Website and was interviewed in Dec 2023. There were 2 interview rounds.
Nodal analysis is a technique used in petroleum engineering to analyze and optimize the performance of oil and gas wells.
Nodal analysis involves the use of mathematical equations and software tools to model and simulate the flow of fluids in a wellbore.
It helps in determining the pressure, flow rate, and other parameters at different points in the well system.
The analysis considers factors such as reservoir properties,...
I have extensive experience in production technology and have achieved significant results in optimizing production processes.
Implemented advanced production techniques to increase oil and gas recovery rates
Developed and executed production strategies to maximize well productivity
Utilized artificial lift systems such as electric submersible pumps and gas lift to enhance production
Implemented data-driven approaches for ...
I applied via Recruitment Consulltant and was interviewed in Oct 2023. There were 2 interview rounds.
I applied via LinkedIn and was interviewed in Jan 2024. There was 1 interview round.
Administrator control refers to the authority and power held by an administrator to manage and oversee various aspects of a system or organization.
Administrator control involves having the ability to make decisions, set policies, and enforce rules within a system or organization.
Administrators have the authority to grant or revoke access privileges, manage user accounts, and control system configurations.
They are respo...
A permit to work is a formal document that authorizes and controls high-risk activities in the workplace.
A permit to work ensures that proper precautions are taken before starting a high-risk task.
It outlines the specific work to be done, the hazards involved, and the necessary safety measures.
Permits are typically issued by a competent authority or supervisor.
Examples of activities requiring a permit to work include w...
I applied via Recruitment Consulltant and was interviewed in Jan 2024. There was 1 interview round.
I applied via Recruitment Consulltant and was interviewed in Oct 2023. There were 3 interview rounds.
The HR Department typically stamps the visa on the passport within a few days of endorsement.
The HR Department usually completes the visa stamping process promptly.
The exact number of days may vary depending on the specific circumstances.
It is advisable to check with the HR Department for the expected timeline.
In some cases, the visa stamping may be expedited for urgent travel requirements.
I am a dedicated Safety Officer with 5 years of experience in implementing safety protocols and ensuring compliance with regulations.
Bachelor's degree in Occupational Health and Safety
Certified Safety Professional (CSP)
Experience conducting safety audits and inspections
Proficient in developing safety training programs
Strong knowledge of OSHA regulations
The responsibility of a Safety Officer is to ensure the workplace is compliant with safety regulations and to implement safety protocols to prevent accidents.
Develop and implement safety policies and procedures
Conduct regular safety inspections and audits
Provide safety training to employees
Investigate accidents and incidents to determine root causes
Maintain safety records and reports
Top trending discussions
The duration of Saudi Aramco interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 55 interviews
Interview experience
based on 519 reviews
Rating in categories
Project Engineer
23
salaries
| ₹0 L/yr - ₹0 L/yr |
Mechanical Engineer
14
salaries
| ₹0 L/yr - ₹0 L/yr |
Safety Officer
13
salaries
| ₹0 L/yr - ₹0 L/yr |
Maintenance Planner
13
salaries
| ₹0 L/yr - ₹0 L/yr |
Safety Engineer
11
salaries
| ₹0 L/yr - ₹0 L/yr |
Reliance Industries
Indian Oil Corporation
Bharat Petroleum
Hindustan Petroleum