Upload Button Icon Add office photos

Saudi Aramco

Compare button icon Compare button icon Compare

Filter interviews by

Saudi Aramco Mechanical Engineer Interview Questions, Process, and Tips

Updated 3 Jun 2022

Saudi Aramco Mechanical Engineer Interview Experiences

1 interview found

I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 6 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(6 Questions)

  • Q1. Explain your self and where did you working current in 2014
  • Q2. Which gas can use for while hot/live tapping
  • Ans. 

    Nitrogen gas is commonly used for hot/live tapping in mechanical engineering.

    • Nitrogen gas is inert and non-reactive, making it safe to use in hot/live tapping processes.

    • It helps to create a protective atmosphere to prevent explosions or fires.

    • Nitrogen gas is readily available and cost-effective.

    • Other gases like argon or carbon dioxide can also be used depending on the specific requirements.

  • Answered by AI
  • Q3. Which method can we follow for railway/road/river crossings
  • Ans. 

    Various methods can be used for railway/road/river crossings depending on the location and other factors.

    • Bridges can be built over the crossing

    • Tunnels can be dug under the crossing

    • Level crossings can be used for roads

    • Flyovers can be constructed for roads

    • Ferries can be used for river crossings

    • Aqueducts can be built for waterways

    • Location, traffic volume, and safety considerations must be taken into account when choosing

  • Answered by AI
  • Q4. Which procedure can follow for pipe lines welding while route and filling
  • Ans. 

    The procedure for pipe lines welding while route and filling involves several steps.

    • Clean the area to be welded thoroughly

    • Tack weld the pipes together

    • Weld the root pass

    • Fill the remaining gap with weld metal

    • Perform post-weld heat treatment if required

    • Inspect the weld for defects

  • Answered by AI
  • Q5. Cross country pipeline code - Nitrogen
  • Q6. Explain About RT, UT, and magnetic partials
  • Ans. 

    RT, UT, and magnetic partials are non-destructive testing methods used in engineering.

    • RT stands for Radiographic Testing and uses X-rays or gamma rays to inspect the internal structure of a material.

    • UT stands for Ultrasonic Testing and uses high-frequency sound waves to detect flaws or defects in a material.

    • Magnetic particle testing uses magnetic fields and iron particles to detect surface and slightly subsurface defec...

  • Answered by AI
Round 3 - Assignment 

What IS API 5L

Round 4 - Coding Test 

What is ASME B 16.5

Round 5 - Coding Test 

What is ASME IX

Round 6 - Coding Test 

Whatbis ASME B 31.4

Interview Preparation Tips

Topics to prepare for Saudi Aramco Mechanical Engineer interview:
  • ASME, API, ASTM, ANSI,
Interview preparation tips for other job seekers - Feel free just listion and first what they are asking then don't give chance to them ask any other questions.
Even I attended in Chennai for other company but they call me for as a Project manager interview and they ask me questions in design, fabrication and supply time management. Then it's confirmed that post they already reserved for some others. If they reserve already they should not call for interveiw.

Interview questions from similar companies

I applied via Company Website and was interviewed before May 2017. There were 2 interview rounds.

Interview Preparation Tips

Round: Resume Shortlist
Experience: I have diploma °ree both in mechanical engineering

General Tips: My interview was held in bombay at head office of aarviencon.limited by H.R deportment darshan patel for 30 min at this time i maintain my pecence.
the question was realeted my subject mechanical engg and spoken english
Skills: communication skill, Communication, Leadership, Presentation Skills, Decision Making Skills
Duration: 1-4 weeks

I applied via Walk-in and was interviewed in Nov 2019. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. I'm autocad draftsman solidworks designer engineer
  • Q2. Production quality manufacturing company

Interview Preparation Tips

Interview preparation tips for other job seekers - Mechanical engineering

I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. The HR round was very pathetic. Sreethala took my HR round.

Interview Preparation Tips

Interview preparation tips for other job seekers - Please don't waste your precious time in giving the interview for Baker Hughes, Powai
Mumbai location. They will take all the interview rounds. The HR will ask you to submit all documents and last moment they will cancel your candidature without giving you any specific reason.

I applied via Recruitment Consultant and was interviewed in Dec 2020. There were 6 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. 1st round is technical , 2nd is values & behaviors , 3rd is assessment road
  • Q2. Be clear on values & behaviours , practice assement round offline before attempting

Interview Preparation Tips

Interview preparation tips for other job seekers - its a long process may take 2-3 months , there is internal & external assement before selectioon is finalized . Good luck
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jan 2024. There were 3 interview rounds.

Round 1 - Group Discussion 

My GD topic was renewable energy.

Round 2 - HR 

(7 Questions)

  • Q1. Tell me about yourself
  • Ans. 

    I am a Senior Engineer with 10+ years of experience in designing and implementing complex systems.

    • 10+ years of experience in engineering

    • Specialize in designing and implementing complex systems

    • Strong problem-solving skills

    • Experience with various programming languages such as Java, Python, and C++

  • Answered by AI
  • Q2. Why do you want to leave your previous company and join GAIL
  • Ans. 

    Seeking new challenges and growth opportunities at GAIL.

    • Desire for new challenges and opportunities for growth

    • Interested in working in a different industry or with different technologies

    • Attracted to GAIL's reputation and projects

    • Seeking a more collaborative and innovative work environment

  • Answered by AI
  • Q3. What do your parents do
  • Ans. 

    My parents are both retired now, but my father used to work as a civil engineer and my mother was a teacher.

    • Father worked as a civil engineer

    • Mother was a teacher

    • Both are retired now

  • Answered by AI
  • Q4. Have you ever visited Delhi earlier
  • Ans. 

    Yes, I have visited Delhi earlier for a business trip.

    • Visited Delhi for a business trip

    • Explored historical sites like Red Fort and Qutub Minar

    • Enjoyed local cuisine like butter chicken and chaat

  • Answered by AI
  • Q5. How did you reach Noida for interview
  • Q6. Where are you staying in Noida for interview process
  • Ans. 

    I am staying at a hotel in Sector 18, Noida for the interview process.

    • Staying at a hotel in Sector 18, Noida

    • Close to the interview location

    • Comfortable accommodation for the duration of the process

  • Answered by AI
  • Q7. Related family background
Round 3 - Technical 

(7 Questions)

  • Q1. Detailed technical questions about bearing, pump, furnace tubes (1st and 2nd pass)MOC, TLE MOC, heat exchanger tube MOC, TEMA codes and classification etc.
  • Q2. Decoking process of cracking furnace, Naphtha circuit of furnace with sketches,
  • Ans. 

    Decoking process involves removing coke deposits from cracking furnace and naphtha circuit to maintain efficiency.

    • Decoking process involves burning off coke deposits using controlled combustion.

    • Mechanical decoking involves using high-pressure water jets to remove coke deposits.

    • Chemical decoking involves using solvents or acids to dissolve coke deposits.

    • Regular decoking is essential to prevent blockages and maintain fur

  • Answered by AI
  • Q3. Detailed refrigeration cycles
  • Ans. 

    Refrigeration cycles are thermodynamic processes used in refrigerators and air conditioners to transfer heat from a low temperature reservoir to a high temperature reservoir.

    • Refrigeration cycles typically involve four main components: compressor, condenser, expansion valve, and evaporator.

    • The refrigerant undergoes a cycle of compression, condensation, expansion, and evaporation to absorb heat from the space being coole...

  • Answered by AI
  • Q4. Safety related questions which I couldn't answer well
  • Q5. Safety procedures before starting of hot job
  • Ans. 

    Safety procedures before starting a hot job include obtaining a hot work permit, conducting a hazard assessment, ensuring proper ventilation, and having fire extinguishing equipment nearby.

    • Obtain a hot work permit before starting any hot job

    • Conduct a hazard assessment to identify potential risks

    • Ensure proper ventilation in the work area to prevent buildup of flammable gases

    • Have fire extinguishing equipment nearby and r

  • Answered by AI
  • Q6. Furnace tubes Welding related questions
  • Q7. Scaffolding and insulation related general questions (easy)

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for GD and just keep enough technical knowledge on your field of experience. Be relaxed and give interview with happy face..don't be depressed if you couldn't answer any question during interview. If you don't know anything just say "I don't know" ...keep the things simple and give honest answer always.
Interview experience
4
Good
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Not Selected

I applied via Company Website and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Behavioral questions and resume delve

Round 2 - Case Study 

Pmi - product management information

Interview Preparation Tips

Interview preparation tips for other job seekers - study supply chain, product management information and presentation

I applied via Company Website and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How will you identify if a pump is cavitating while working on a DCS panel?
  • Ans. 

    To identify if a pump is cavitating while working on a DCS panel, you can look for certain indicators.

    • Monitor the pump's suction pressure. If it is fluctuating or dropping below the specified range, it may indicate cavitation.

    • Check the pump's discharge pressure. If it is higher than normal, it could be a sign of cavitation.

    • Listen for unusual noises such as a rattling or grinding sound coming from the pump.

    • Inspect the p...

  • Answered by AI
  • Q2. How would you prepare a hydrocarbon vessel for vessel entry?
  • Ans. 

    To prepare a hydrocarbon vessel for vessel entry, follow these steps:

    • Ensure the vessel is properly isolated from the process and all sources of energy

    • Ventilate the vessel to remove any flammable or toxic gases

    • Perform a thorough inspection of the vessel for any signs of leaks or damage

    • Implement proper lockout/tagout procedures to prevent accidental activation of equipment

    • Provide appropriate personal protective equipment...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for GAIL Senior Engineer interview:
  • Chemical Engineering
  • DCS Operations
Interview preparation tips for other job seekers - Try to answer the questions asked in simple words. The interviewer generally wants to judge an interviewee based on his understanding of the subject. When an applicant is appearing for an interview, he should share his experience and try to quote examples from his experience.

I applied via Company Website and was interviewed in Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Basic Question related to mechanical basics
Round 3 - HR 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. Strength & Weakness, Where you see 5 years from now.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong on your basic engineering. Prepare HR round. HR process is very slow. It will take at least 1.5months to release your offer.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What would you do if the design called for tight tolerances and the part was manufactured out of tolerance
  • Ans. 

    I would assess the impact of the out-of-tolerance part and determine if it can still function within acceptable limits or if it needs to be reworked or replaced.

    • Assess the functionality of the part with the out-of-tolerance dimensions

    • Determine if the part can still meet the overall design requirements despite being out of tolerance

    • Consider the potential impact on the performance and safety of the final product

    • Consult w...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Tell me what you see about his drawing
  • Ans. 

    The drawing appears to be a mechanical component with multiple parts and dimensions.

    • The drawing includes various geometric shapes such as circles, rectangles, and lines.

    • There are labels indicating dimensions and measurements for each part.

    • The drawing may also include annotations or symbols representing different materials or processes.

    • It seems to be a detailed technical drawing for manufacturing or assembly purposes.

  • Answered by AI

Skills evaluated in this interview

Saudi Aramco Interview FAQs

How many rounds are there in Saudi Aramco Mechanical Engineer interview?
Saudi Aramco interview process usually has 6 rounds. The most common rounds in the Saudi Aramco interview process are Coding Test, Resume Shortlist and One-on-one Round.
What are the top questions asked in Saudi Aramco Mechanical Engineer interview?

Some of the top questions asked at the Saudi Aramco Mechanical Engineer interview -

  1. Which procedure can follow for pipe lines welding while route and fill...read more
  2. Which gas can use for while hot/live tapp...read more
  3. Which method can we follow for railway/road/river crossi...read more

Tell us how to improve this page.

Saudi Aramco Mechanical Engineer Salary
based on 13 salaries
₹4.9 L/yr - ₹18.6 L/yr
131% more than the average Mechanical Engineer Salary in India
View more details

Saudi Aramco Mechanical Engineer Reviews and Ratings

based on 8 reviews

4.9/5

Rating in categories

4.8

Skill development

4.6

Work-life balance

4.9

Salary

4.3

Job security

4.9

Company culture

4.4

Promotions

4.4

Work satisfaction

Explore 8 Reviews and Ratings
Project Engineer
23 salaries
unlock blur

₹24.5 L/yr - ₹52.2 L/yr

Mechanical Engineer
13 salaries
unlock blur

₹4.9 L/yr - ₹18.6 L/yr

Maintenance Planner
13 salaries
unlock blur

₹15.5 L/yr - ₹43.7 L/yr

Safety Engineer
11 salaries
unlock blur

₹2.5 L/yr - ₹13.2 L/yr

Safety Officer
11 salaries
unlock blur

₹4 L/yr - ₹12 L/yr

Explore more salaries
Compare Saudi Aramco with

Reliance Industries

4.0
Compare

Indian Oil Corporation

4.4
Compare

Shell

4.0
Compare

Bharat Petroleum

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview