Filter interviews by
I applied via Campus Placement and was interviewed in Jul 2024. There were 2 interview rounds.
Top trending discussions
posted on 12 Nov 2024
I applied via Company Website and was interviewed before Nov 2023. There were 2 interview rounds.
Impact of russia ukraine war
A pump is a mechanical device used to move fluids from one place to another by creating pressure.
Pumps work by converting mechanical energy into fluid flow.
They typically consist of an inlet, an outlet, and a mechanism to move the fluid.
Examples include centrifugal pumps, diaphragm pumps, and piston pumps.
I applied via Company Website and was interviewed in Aug 2022. There were 3 interview rounds.
I applied via Referral and was interviewed before Apr 2022. There were 3 interview rounds.
What I know about permit to work system
posted on 3 Jun 2022
I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 6 interview rounds.
Nitrogen gas is commonly used for hot/live tapping in mechanical engineering.
Nitrogen gas is inert and non-reactive, making it safe to use in hot/live tapping processes.
It helps to create a protective atmosphere to prevent explosions or fires.
Nitrogen gas is readily available and cost-effective.
Other gases like argon or carbon dioxide can also be used depending on the specific requirements.
Various methods can be used for railway/road/river crossings depending on the location and other factors.
Bridges can be built over the crossing
Tunnels can be dug under the crossing
Level crossings can be used for roads
Flyovers can be constructed for roads
Ferries can be used for river crossings
Aqueducts can be built for waterways
Location, traffic volume, and safety considerations must be taken into account when choosing
The procedure for pipe lines welding while route and filling involves several steps.
Clean the area to be welded thoroughly
Tack weld the pipes together
Weld the root pass
Fill the remaining gap with weld metal
Perform post-weld heat treatment if required
Inspect the weld for defects
RT, UT, and magnetic partials are non-destructive testing methods used in engineering.
RT stands for Radiographic Testing and uses X-rays or gamma rays to inspect the internal structure of a material.
UT stands for Ultrasonic Testing and uses high-frequency sound waves to detect flaws or defects in a material.
Magnetic particle testing uses magnetic fields and iron particles to detect surface and slightly subsurface defec...
What IS API 5L
What is ASME B 16.5
What is ASME IX
Whatbis ASME B 31.4
In case of an emergency, I would remain calm, assess the situation, and take appropriate action to ensure the safety of all individuals involved.
Remain calm and assess the situation quickly
Follow emergency protocols and procedures
Ensure the safety of all individuals involved
Contact emergency services if necessary
Provide first aid or medical assistance if trained to do so
posted on 1 Aug 2024
I have experience working on projects involving welding and applying GD&T principles.
Completed a project where I designed and welded a steel frame for a small vehicle
Utilized GD&T principles to ensure precise measurements and tolerances in a project involving machining parts for an assembly line
Familiar with interpreting engineering drawings and applying GD&T symbols accurately
posted on 17 May 2024
Mainly on basic details
posted on 7 Mar 2022
I applied via Walk-in
One by one all member questions
To use a fire extinguisher, remember the acronym PASS: Pull, Aim, Squeeze, Sweep.
Pull the pin to break the seal
Aim the nozzle at the base of the fire
Squeeze the handle to release the extinguishing agent
Sweep the nozzle from side to side until the fire is out
To fix a bearing in soft, first remove the old bearing and clean the area. Then, apply adhesive and insert the new bearing.
Remove the old bearing carefully
Clean the area thoroughly
Apply adhesive to the new bearing
Insert the new bearing into the soft
Allow the adhesive to dry completely
1 inch is equal to 25.4 mm.
1 inch = 25.4 mm
This is a conversion question from inches to millimeters
The conversion factor is constant and widely used in engineering and manufacturing
posted on 10 Aug 2021
I applied via Recruitment Consultant and was interviewed in Jul 2021. There were 3 interview rounds.
Trainers can be established by identifying the training needs, selecting appropriate trainers, and providing necessary resources.
Identify the training needs of the organization
Select trainers who have the necessary skills and experience
Provide necessary resources such as training materials and equipment
Establish a training schedule and ensure trainers are available
Evaluate the effectiveness of the training program and
based on 1 interview
Interview experience
based on 13 reviews
Rating in categories
Graduate Apprentice Trainee
238
salaries
| ₹1 L/yr - ₹5 L/yr |
Assistant Manager
221
salaries
| ₹12 L/yr - ₹34 L/yr |
Manager
167
salaries
| ₹15.8 L/yr - ₹45 L/yr |
Graduate Apprenticeship Trainee
124
salaries
| ₹1.3 L/yr - ₹5 L/yr |
Graduate Engineer Trainee (Get)
92
salaries
| ₹2.4 L/yr - ₹4.5 L/yr |
Indian Oil Corporation
Hindustan Petroleum
Reliance Industries
Oil And Natural Gas Corporation