20+ Fresenius Kabi Interview Questions and Answers

Answers to questions related to CAE engineering including stress, bending moment, quality criteria in FEA, tet collapse, test correlation, FEA modelling process, and types of elements in Nastran and Dyna.

• Stress is the force per unit area that a material experiences when subjected to an external load.

• Bending moment is the moment that causes a beam to bend.

• Quality criteria in FEA include accuracy, convergence, and stability.

• Tet collapse is a phenomenon where tetrahedral element...read more

Young's modulus is a measure of stiffness of a material while ultimate tensile strength is the maximum stress a material can withstand.

• Young's modulus is the ratio of stress to strain in a material under tension or compression.

• Ultimate tensile strength is the maximum stress a material can withstand before breaking.

• Young's modulus is measured in pascals (Pa) while ultimate tensile strength is measured in newtons per square meter (N/m²).

Properties considered when selecting a material

• Strength and durability

• Thermal conductivity

• Electrical conductivity

• Corrosion resistance

• Cost

• Availability

• Environmental impact

The specimen that breaks first depends on its material properties and the direction of the load.

• The material properties of the specimens will determine their strength and ability to withstand loads.

• The direction of the load will also play a role in determining which specimen breaks first.

• For example, if one specimen is stronger in tension and the other is stronger in compression, the one subjected to the opposite load will break first.

• The size and shape of the specimens can a...read more

The diagram is not provided, so it is not possible to answer the question.

• Diagram not provided

• Cannot answer without visual aid

Stress-strain diagram for composites shows non-linear behavior due to the presence of multiple phases.

• Composites exhibit non-linear behavior due to the presence of multiple phases.

• The stress-strain diagram for composites shows a linear region followed by a non-linear region.

• The non-linear region is due to the failure of the weaker phase.

• The slope of the linear region is the modulus of elasticity of the composite.

• The ultimate strength of the composite is determined by the stre...read more

Elasticity is the ability of a material to return to its original shape after being deformed. Stress and strain curve shows the relationship between stress and strain.

• Elasticity is a property of materials that allows them to return to their original shape after being stretched or compressed.

• Stress is the force applied to a material per unit area, while strain is the resulting deformation of the material.

• The stress-strain curve shows the relationship between stress and strain ...read more

Spot welds and bolts can be created in ANSA using various tools and methods.

• For spot welds, use the Spot Weld tool and select the two surfaces to be welded together.

• For bolts, use the Bolt tool and select the two surfaces to be bolted together. Specify the bolt type, size, and other parameters.

• ANSA also provides options to create spot welds and bolts automatically based on predefined rules and criteria.

• Ensure that the spot welds and bolts are placed correctly and in the appro...read more

Enthalpy is the sum of internal energy and the product of pressure and volume.

• Enthalpy is a thermodynamic property of a system.

• It is represented by the symbol 'H'.

• It is defined as the sum of internal energy and the product of pressure and volume.

• Enthalpy change is the difference between the enthalpies of the products and reactants in a chemical reaction.

• Enthalpy is used in various fields including chemistry, physics, and engineering.

Stress is the force applied to a material, strain is the resulting deformation, and stress-strain curve shows the relationship between them.

• Stress is the force per unit area applied to a material.

• Strain is the measure of deformation or change in shape of a material.

• Stress-strain curve illustrates the relationship between stress and strain for a given material.

• It helps in understanding the material's mechanical properties, such as elasticity, yield strength, and ultimate stren...read more

Theories of failure are principles used to explain why materials fail under certain conditions.

• The Mohr-Coulomb theory states that failure occurs when the maximum shear stress exceeds the shear strength of the material.

• The Maximum Normal Stress theory suggests that failure occurs when the maximum normal stress in a material exceeds its ultimate tensile strength.

• The Maximum Shear Stress theory states that failure occurs when the maximum shear stress in a material exceeds its s...read more

The material used for NC is Nitrocellulose.

• Nitrocellulose is a highly flammable compound commonly used in the production of lacquers, explosives, and solid rocket propellants.

• It is also used in the manufacturing of nail polish, leather finishes, and wood coatings.

• NC is a key ingredient in the production of celluloid, a type of plastic used in early film production.

Yield strength is the amount of stress a material can withstand before it starts to deform permanently.

• It is the stress at which a material begins to deform plastically

• It is an important factor in determining the strength and durability of a material

• It is usually measured in units of psi or MPa

• Example: The yield strength of steel is around 36,000 psi

Poisson's ratio is the ratio of lateral strain to longitudinal strain in a material.

• It is a measure of the deformation of a material under stress.

• It is denoted by the Greek letter nu (ν).

• It is a dimensionless quantity.

• It is used in engineering to predict the behavior of materials under stress.

• For most materials, Poisson's ratio is between 0.2 and 0.3.

Stress is the force applied to a material, while strain is the resulting deformation or change in shape.

• Stress is measured in force per unit area (e.g. N/m^2 or Pascals)

• Strain is a dimensionless quantity representing the amount of deformation

• Stress and strain are related by the material's elastic modulus

• Example: Stretching a rubber band causes stress and strain in the material

BIW stands for Body in White, which refers to the stage in automotive manufacturing where a car body's sheet metal components have been welded together but before the final assembly of components like doors, hood, and trunk.

• BIW is the stage in automotive manufacturing where the car body's sheet metal components are welded together.

• It is the stage before the final assembly of components like doors, hood, and trunk.

• BIW is an important stage as it sets the foundation for the ove...read more

My expected CTC is negotiable based on the responsibilities and benefits offered by the company.

• My expected CTC is based on my experience, skills, and the market rate for the position.

• I am open to discussing the salary range during the interview process.

• I am looking for a competitive salary package with room for growth and advancement.

• I am flexible and willing to consider other benefits such as bonuses, incentives, and healthcare coverage.

Satya Microcapital Ltd is a leading microfinance institution known for its innovative financial products and services.

• Strong reputation in the microfinance industry

• Innovative financial products and services

• Positive impact on the community

• Opportunities for growth and development

• Positive work culture and values

Yes, I know Ravi Parkash. He is a colleague of mine at our previous company.

• Ravi Parkash is a colleague

• We worked together at our previous company

The lighting circuit is a system of electrical components that provide power to light fixtures.

• The circuit starts at the electrical panel where a circuit breaker or fuse protects the circuit from overloading.

• The circuit then runs through a switch that controls the light fixture.

• The switch is connected to the light fixture by a cable or wire.

• The light fixture is then connected to the electrical panel by another cable or wire.

• The circuit may also include other components such a...read more