Upload Button Icon Add office photos

Filter interviews by

Satyam Venture Engineering Services Senior Designer Interview Questions and Answers

Updated 8 Jun 2024

Satyam Venture Engineering Services Senior Designer Interview Experiences

1 interview found

Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is the material used for NC
  • Ans. 

    The material used for NC is Nitrocellulose.

    • Nitrocellulose is a highly flammable compound commonly used in the production of lacquers, explosives, and solid rocket propellants.

    • It is also used in the manufacturing of nail polish, leather finishes, and wood coatings.

    • NC is a key ingredient in the production of celluloid, a type of plastic used in early film production.

  • Answered by AI
  • Q2. What is meaning of BIW?
  • Ans. 

    BIW stands for Body in White, which refers to the stage in automotive manufacturing where a car body's sheet metal components have been welded together but before the final assembly of components like doors, hood, and trunk.

    • BIW is the stage in automotive manufacturing where the car body's sheet metal components are welded together.

    • It is the stage before the final assembly of components like doors, hood, and trunk.

    • BIW i...

  • Answered by AI

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Telephonic Call 

(1 Question)

  • Q1. Technical questions related to Mechanical Engineering. Current job role and responsibilities
Round 3 - Panel interview 

(2 Questions)

  • Q1. Current job role and responsibilities.
  • Q2. What is Tempering? Material science questions
Round 4 - One-on-one 

(2 Questions)

  • Q1. Interview with VP India.
  • Q2. Questions on Combustion Engines. Difference between two-stroke and four-stroke. Current job role and responsibilities. How to design a snap.

Interview Preparation Tips

Interview preparation tips for other job seekers - Know your profile well. Brush up on Mechanical engineering topics

I applied via Walk-in

Round 1 - Technical 

(1 Question)

  • Q1. What is your current role and responsibility
Round 2 - One-on-one 

(1 Question)

  • Q1. Why you are leaving your current job

Interview Preparation Tips

Interview preparation tips for other job seekers - Please ready with all technical answer with weel study

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
-

I appeared for an interview before Mar 2024, where I was asked the following questions.

  • Q1. What is a random cylinder?
  • Ans. 

    A random cylinder is a geometric shape defined by a random height and radius, often used in probability and statistics.

    • A random cylinder can be defined by its height (h) and radius (r), which can vary randomly.

    • In probability, random cylinders can model real-world phenomena, like the distribution of particles in a volume.

    • Example: If the height of a cylinder is uniformly distributed between 1 and 10 units, and the radius...

  • Answered by AI
  • Q2. What does OEE stand for, and how is it measured?
  • Ans. 

    OEE stands for Overall Equipment Effectiveness, a metric used to measure manufacturing productivity.

    • OEE is calculated using three components: Availability, Performance, and Quality.

    • Availability = (Operating Time / Planned Production Time) x 100%. Example: If a machine runs for 8 hours but is down for 1 hour, availability is 87.5%.

    • Performance = (Actual Output / Maximum Possible Output) x 100%. Example: If a machine prod...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview in Jun 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.
  • Ans. 

    I am an experienced Senior Engineer with a strong background in software development and project management.

    • Over 10 years of experience in software development

    • Proficient in multiple programming languages such as Java, C++, and Python

    • Extensive knowledge of software development methodologies and best practices

    • Proven track record of successfully leading and delivering complex projects

    • Strong problem-solving and analytical ...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. 8D report with real example
  • Ans. 

    8D report is a problem-solving methodology used to identify, correct and prevent recurring problems.

    • 8D stands for 8 Disciplines

    • It involves a team-based approach to problem-solving

    • The report includes a detailed description of the problem, root cause analysis, corrective actions, and preventive measures

    • Example: A manufacturing company received customer complaints about a defect in their product. The team used the 8D repo...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep study in details about your skills mentioned in resume.

I applied via Recruitment Consultant and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

7 Questions

  • Q1. Q1. What is the latest version of PPAP?
  • Ans. 

    The latest version of PPAP is PPAP 4th Edition.

    • PPAP stands for Production Part Approval Process.

    • The 4th Edition of PPAP was released in 2006.

    • It is a standardized process in the automotive industry to ensure that suppliers meet the requirements for production parts.

    • PPAP includes documentation such as design records, engineering change documents, and control plans.

    • It also involves conducting various tests and measurement...

  • Answered by AI
  • Q2. Q2. What is Fmea & why it is used during development?
  • Ans. 

    FMEA is a method used during development to identify and mitigate potential failures in a system or process.

    • FMEA stands for Failure Mode and Effects Analysis.

    • It is a systematic approach to identify and prioritize potential failures in a system or process.

    • FMEA helps in understanding the potential causes and effects of failures.

    • It is used to assess the severity, occurrence, and detectability of failures.

    • By analyzing fail...

  • Answered by AI
  • Q3. What is DVP&R ?
  • Ans. 

    DVP&R stands for Design Verification Plan and Report. It is a process used to ensure that a product meets its design specifications.

    • DVP&R is a structured approach to testing and validating a product's design.

    • It involves creating a plan for testing the product, executing the tests, and documenting the results.

    • The plan includes details such as the test objectives, test methods, acceptance criteria, and test schedule.

    • The ...

  • Answered by AI
  • Q4. What is the value of NDC & we take the this value..??
  • Ans. 

    NDC stands for National Drug Code. It is a unique identifier for drugs in the United States.

    • NDC is a 10-digit code that identifies drugs, including prescription and over-the-counter medications.

    • The first segment of the NDC represents the labeler code, which identifies the manufacturer or distributor of the drug.

    • The second segment represents the product code, which identifies the specific drug formulation and strength.

    • T...

  • Answered by AI
  • Q5. At which stage the Npd work of PPAP File making is done?
  • Ans. 

    PPAP file making is done during the production validation stage of NPD work.

    • PPAP file making is a part of the production validation process in NPD work

    • It involves documenting the production process and ensuring it meets customer requirements

    • PPAP file making is typically done after the design and development stages

    • It includes documentation such as control plans, process flow diagrams, and inspection records

  • Answered by AI
  • Q6. How many ppm in 6 sigma..?
  • Ans. 

    The ppm in 6 sigma is 3.4 defects per million opportunities (DPMO).

    • 6 sigma aims for a defect rate of 3.4 DPMO.

    • PPM stands for parts per million.

    • DPMO is a measure of process performance.

    • The lower the DPMO, the better the process performance.

    • Achieving 6 sigma means having a process that produces 99.99966% defect-free output.

  • Answered by AI
  • Q7. Problem solving tools & describe pareto chart & why we use it..?
  • Ans. 

    Pareto chart is a problem-solving tool used to identify and prioritize the causes of a problem.

    • Pareto chart is a bar graph that displays the relative frequency or size of problems in descending order of importance.

    • It helps to identify the vital few causes that account for the majority of the problems.

    • It is based on the Pareto principle, also known as the 80/20 rule, which states that 80% of the effects come from 20% of...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Give interview with full confidence either u r wrong or right .

I applied via Referral and was interviewed before Nov 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Process related questions ,.
  • Q2. How to manage spares.
  • Ans. 

    Spares management involves inventory control, procurement, and maintenance planning.

    • Create a detailed inventory of all spares and their usage frequency.

    • Establish a procurement process that ensures timely availability of spares.

    • Implement a maintenance plan that includes regular inspection and replacement of spares.

    • Use technology such as barcoding and RFID to track spares and prevent loss or theft.

    • Regularly review and up...

  • Answered by AI
  • Q3. How to manage shift issue
  • Ans. 

    Shift issues can be managed by effective communication, proper scheduling, and providing necessary resources.

    • Establish clear communication channels between team members and management

    • Create a schedule that takes into account employee preferences and availability

    • Ensure that all necessary resources are available for each shift

    • Regularly review and adjust the schedule as needed

    • Provide training and support for employees to ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Need wiring harness process and about knowledge. Interview not though.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Supplier quality assurance NPD Apqp ppap SPC MSA QAV VENDOR RATTING FMEA XBAR CHAR CUSTOMER RATTING INPROCESS
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About experiance and related about resume

Interview Preparation Tips

Interview preparation tips for other job seekers - Friendly

Satyam Venture Engineering Services Interview FAQs

How many rounds are there in Satyam Venture Engineering Services Senior Designer interview?
Satyam Venture Engineering Services interview process usually has 1 rounds. The most common rounds in the Satyam Venture Engineering Services interview process are Technical.
How to prepare for Satyam Venture Engineering Services Senior Designer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Satyam Venture Engineering Services. The most common topics and skills that interviewers at Satyam Venture Engineering Services expect are CATIA, Exterior, Biw, CAD and Claims.
What are the top questions asked in Satyam Venture Engineering Services Senior Designer interview?

Some of the top questions asked at the Satyam Venture Engineering Services Senior Designer interview -

  1. What is the material used for...read more
  2. What is meaning of B...read more

Tell us how to improve this page.

Satyam Venture Engineering Services Senior Designer Interview Process

based on 2 interviews

Interview experience

3.5
  
Good
View more

Interview Questions from Similar Companies

JBM Group Interview Questions
4.0
 • 280 Interviews
UNO Minda Interview Questions
4.0
 • 175 Interviews
Exide Industries Interview Questions
3.5
 • 174 Interviews
Subros Interview Questions
3.8
 • 168 Interviews
Ceat Tyres Interview Questions
4.0
 • 166 Interviews
Apollo Tyres Interview Questions
4.0
 • 132 Interviews
Spark Minda Interview Questions
3.9
 • 122 Interviews
Hitachi Astemo Interview Questions
4.1
 • 105 Interviews
View all
Satyam Venture Engineering Services Senior Designer Salary
based on 84 salaries
₹4 L/yr - ₹9.5 L/yr
36% less than the average Senior Designer Salary in India
View more details

Satyam Venture Engineering Services Senior Designer Reviews and Ratings

based on 18 reviews

4.3/5

Rating in categories

4.2

Skill development

4.4

Work-life balance

3.8

Salary

4.4

Job security

4.1

Company culture

4.0

Promotions

4.2

Work satisfaction

Explore 18 Reviews and Ratings
Senior Design Engineer
249 salaries
unlock blur

₹4.1 L/yr - ₹13.5 L/yr

Specialist
246 salaries
unlock blur

₹6 L/yr - ₹16.8 L/yr

CAE Analyst
183 salaries
unlock blur

₹2.6 L/yr - ₹12 L/yr

Senior Specialist
182 salaries
unlock blur

₹7.7 L/yr - ₹19.3 L/yr

Senior Analyst
153 salaries
unlock blur

₹4.7 L/yr - ₹11 L/yr

Explore more salaries
Compare Satyam Venture Engineering Services with

JBM Group

4.0
Compare

Subros

3.8
Compare

Ceat Tyres

4.0
Compare

UNO Minda

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview