Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Runwal Group Team. If you also belong to the team, you can get access from here

Runwal Group Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Runwal Group Site Engineer Interview Questions and Answers

Updated 13 Feb 2025

Runwal Group Site Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected
Round 1 - Technical 

(1 Question)

  • Q1. Are you worked in mivan shuttering
  • Ans. 

    Yes, I have worked with Mivan shuttering in previous projects.

    • I have experience in setting up and dismantling Mivan formwork for concrete construction

    • I am familiar with the process of pouring concrete into Mivan shuttering to create walls and slabs

    • I have worked with Mivan system in residential and commercial projects

    • I understand the importance of proper alignment and bracing when using Mivan shuttering

  • Answered by AI

Interview questions from similar companies

I applied via Company Website and was interviewed before Oct 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Draw SFD & BMD for a simply supported load.
  • Ans. 

    SFD & BMD for a simply supported load

    • SFD is a diagram that shows the variation of shear force along the length of a beam

    • BMD is a diagram that shows the variation of bending moment along the length of a beam

    • For a simply supported load, the SFD will be a straight line with a constant slope

    • The BMD will be a parabolic curve with the maximum value at the center of the beam

    • The SFD and BMD can be calculated using equations an

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was good and they asked lot of questions about Is codes and from site related questions.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Round was quite easy, for mechanical they had turbo machinery and heat transfer questions and basic SOM,TOM,MD,MF

Round 3 - One-on-one 

(2 Questions)

  • Q1. 1. Tell me about yourself
  • Q2. 2. How lift works and how ACs work and different types of ACs
  • Ans. 

    Lifts work on the principle of pulleys and counterweights while ACs work on the principle of refrigeration.

    • Lifts use a motor to move a counterweight that balances the weight of the lift car and its occupants.

    • ACs use a compressor to compress and expand refrigerant gas to absorb and release heat.

    • Types of ACs include window ACs, split ACs, central ACs, and portable ACs.

    • Window ACs are mounted on windows and cool a single r...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Brush up your skills regarding refrigerations and airconditioning
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Aug 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About department questions
Round 3 - Aptitude Test 

About numerical, blood relation etc.,

Round 4 - HR 

(1 Question)

  • Q1. Skills, self intro, Salary discussion
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. About Your self ? My self Ramachandra pradhan , I am from Odisha My father is farmer and my mother is house wife We are 2 brother and 1 sister , I am working in sobha may18, 2022 to January 24 , 2024 Wha...
  • Q2. What you expect salary? I want 24,000
  • Q3. How much your experience? I have a 1.5 year experience.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Sep 2023. There were 2 interview rounds.

Round 1 - One-on-one 

(1 Question)

  • Q1. What is cement and types of cement
  • Ans. 

    Cement is a binding material used in construction. Types include Portland cement, white cement, and rapid-hardening cement.

    • Cement is a fine powder made from limestone, clay, and other minerals.

    • Portland cement is the most common type used in construction.

    • White cement is used for architectural purposes to achieve a clean, bright finish.

    • Rapid-hardening cement sets quickly and is ideal for projects with tight deadlines.

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. What is the lapping of steel
  • Ans. 

    Lapping of steel is the process of overlapping two pieces of steel to create a continuous connection.

    • Lapping is commonly used in construction to join reinforcing steel bars together.

    • The overlapping length is typically specified in construction drawings or codes.

    • Proper lapping ensures structural integrity and strength of the steel connection.

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Sobha Site Engineer interview:
  • Steel Structures
  • Infrastructure
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jun 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What is formwork and their types
  • Q2. Grades of concrete and steel
Round 2 - HR 

(2 Questions)

  • Q1. Are to ready to work in tight schedule like overnight from 8 am to 6pm
  • Q2. How many years you are work in this company

Interview Preparation Tips

Interview preparation tips for other job seekers - If u are going to attend interview for site engineer Mainly focus on
1. IS456:2000
2.form Work
3. Steel Bar bending schedule
4. Basic civil engineering related knowledge
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Nov 2023. There was 1 interview round.

Round 1 - Group Discussion 

About super structure

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in May 2024. There was 1 interview round.

Round 1 - Aptitude Test 

Good questions asked tested about our iq

Interview Preparation Tips

Interview preparation tips for other job seekers - Be careful and be an fast learner and enjoy the job
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Under and over reinf of beam and column
  • Ans. 

    Under and over reinforcement in beams and columns refers to the amount of reinforcement provided in relation to the required strength of the structure.

    • Under reinforcement occurs when the amount of reinforcement provided is less than what is required for the structure to carry the design loads.

    • Over reinforcement occurs when the amount of reinforcement provided is more than what is required for the structure, leading to ...

  • Answered by AI
  • Q2. Ndt tests of members of why it’s been done
  • Ans. 

    NDT tests of members are done to ensure structural integrity and safety.

    • NDT tests are non-destructive tests used to evaluate the properties of a material, component, or system without causing damage.

    • These tests help in detecting defects such as cracks, voids, and discontinuities that may compromise the structural integrity of the members.

    • By conducting NDT tests, engineers can ensure the safety and reliability of struct...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. Salary negotiations
  • Q2. Previous employment

Interview Preparation Tips

Interview preparation tips for other job seekers - Good interview

Runwal Group Interview FAQs

How many rounds are there in Runwal Group Site Engineer interview?
Runwal Group interview process usually has 1 rounds. The most common rounds in the Runwal Group interview process are Technical.

Tell us how to improve this page.

Runwal Group Site Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Site Engineer Interview Questions from Similar Companies

View all
Runwal Group Site Engineer Salary
based on 28 salaries
₹3.6 L/yr - ₹6.9 L/yr
56% more than the average Site Engineer Salary in India
View more details

Runwal Group Site Engineer Reviews and Ratings

based on 8 reviews

3.6/5

Rating in categories

3.8

Skill development

3.9

Work-life balance

3.7

Salary

4.0

Job security

3.7

Company culture

3.5

Promotions

3.2

Work satisfaction

Explore 8 Reviews and Ratings
Assistant Manager
109 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
43 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant General Manager
41 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
39 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
33 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Runwal Group with

Godrej Properties

3.7
Compare

DLF

3.9
Compare

Sobha

3.9
Compare

Prestige Group

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview