Filter interviews by
I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.
Under and over reinforcement in beams and columns refers to the amount of reinforcement provided in relation to the required strength of the structure.
Under reinforcement occurs when the amount of reinforcement provided is less than what is required for the structure to carry the design loads.
Over reinforcement occurs when the amount of reinforcement provided is more than what is required for the structure, leading to ...
NDT tests of members are done to ensure structural integrity and safety.
NDT tests are non-destructive tests used to evaluate the properties of a material, component, or system without causing damage.
These tests help in detecting defects such as cracks, voids, and discontinuities that may compromise the structural integrity of the members.
By conducting NDT tests, engineers can ensure the safety and reliability of struct...
I applied via Approached by Company and was interviewed in Feb 2022. There were 2 interview rounds.
I am manikandan diploma civil in 5 years experience sir
I applied via Referral and was interviewed in Sep 2023. There were 2 interview rounds.
I applied via Walk-in and was interviewed before Aug 2023. There was 1 interview round.
posted on 19 Jul 2022
I applied via Company Website and was interviewed in Jun 2022. There were 2 interview rounds.
I applied via Walk-in and was interviewed before Feb 2022. There were 2 interview rounds.
One way slab is supported on two opposite sides while two way slab is supported on all four sides.
One way slab is designed to carry the load in one direction only
Two way slab is designed to carry the load in both directions
One way slab is economical for small spans and light loads
Two way slab is suitable for larger spans and heavy loads
One way slab requires less reinforcement compared to two way slab
If the ratio of length and width of slab is 2 or more, then it's a two-way slab.
A two-way slab is supported by beams on all four sides.
The ratio of length and width determines the direction of the main reinforcement.
A one-way slab is supported by beams on two opposite sides only.
I applied via Campus Placement and was interviewed in Sep 2022. There were 3 interview rounds.
I am a Site Engineer with expertise in cement density, brick size, and concrete grade.
I have extensive knowledge of different types of cement and their densities.
I am familiar with various brick sizes and their applications in construction.
I have experience working with different concrete grades for different structural requirements.
I can provide recommendations on the appropriate cement density, brick size, and concre
I am a dedicated and experienced Site Engineer with a strong background in construction and project management.
Bachelor's degree in Civil Engineering
5 years of experience in managing construction projects
Proficient in using construction software and tools
Strong problem-solving and decision-making skills
Excellent communication and leadership abilities
Completed successful projects such as building a commercial complex an
My family background is diverse and has influenced my values and work ethic.
My parents are both engineers, which inspired me to pursue a career in engineering.
I come from a close-knit family that values education and hard work.
My grandparents were farmers, teaching me the importance of perseverance and adaptability.
I have a sibling who is a doctor, which has given me insights into the medical field.
My family has always...
I applied via Company Website and was interviewed before Oct 2020. There were 4 interview rounds.
SFD & BMD for a simply supported load
SFD is a diagram that shows the variation of shear force along the length of a beam
BMD is a diagram that shows the variation of bending moment along the length of a beam
For a simply supported load, the SFD will be a straight line with a constant slope
The BMD will be a parabolic curve with the maximum value at the center of the beam
The SFD and BMD can be calculated using equations an
posted on 19 Mar 2022
I applied via Walk-in and was interviewed in Feb 2022. There were 3 interview rounds.
Bricks are wet during brick work to prevent them from absorbing water from the mortar too quickly.
Wet bricks prevent the mortar from drying out too quickly, which can weaken the bond between the bricks and the mortar.
Wet bricks also help to prevent efflorescence, a white powdery substance that can form on the surface of bricks due to the migration of salts.
Bricks should be dampened, not soaked, before use.
The amount of...
The thickness of cement mortar in brickwork varies depending on the type of brick and the purpose of the wall.
For load-bearing walls, the thickness of the mortar should be 10mm for horizontal joints and 8mm for vertical joints.
For non-load-bearing walls, the thickness of the mortar can be reduced to 6mm for horizontal joints and 4mm for vertical joints.
The type of brick used can also affect the thickness of the mortar....
Chemical names of water proofing
Acrylic polymers
Bituminous coatings
Silicones
Polyurethane
Epoxy resins
Ceramic or porcelain tiles are commonly used in toilets due to their durability and water resistance.
Ceramic or porcelain tiles are commonly used in toilets
These tiles are durable and water-resistant
Other options include natural stone tiles and vinyl tiles
I expect a competitive salary based on my qualifications and experience.
Research the average salary range for Site Engineers in your area
Consider your level of experience and expertise
Factor in any additional certifications or specialized skills you possess
Be prepared to negotiate and discuss benefits package
Example: Based on my research, the average salary range for Site Engineers in this area is $60,000 to $80,000. C...
I worked as a Site Engineer at XYZ Construction Company.
Managed and supervised construction projects on-site.
Ensured compliance with building codes and regulations.
Collaborated with architects, contractors, and subcontractors.
Monitored project progress and resolved any issues that arose.
Prepared and maintained project documentation, including reports and drawings.
posted on 1 Oct 2021
I applied via Naukri.com and was interviewed in Sep 2021. There was 1 interview round.
Welding quality is the measure of how well a weld meets the required standards and specifications.
Welding quality is determined by factors such as weld strength, appearance, and adherence to welding procedures.
It is important to ensure that the weld is free from defects such as cracks, porosity, and incomplete fusion.
Quality control measures, such as non-destructive testing, are used to assess the integrity of the weld...
based on 1 interview
Interview experience
based on 3 reviews
Rating in categories
Assistant Manager
80
salaries
| ₹4.6 L/yr - ₹14.5 L/yr |
Deputy Manager
65
salaries
| ₹5.7 L/yr - ₹15 L/yr |
Executive Accountant
34
salaries
| ₹2.2 L/yr - ₹5.4 L/yr |
Senior Executive
32
salaries
| ₹3.4 L/yr - ₹8.5 L/yr |
Project Manager
31
salaries
| ₹6.7 L/yr - ₹21.5 L/yr |
Sobha
Lodha Group
Cushman & Wakefield
Godrej Properties