Rising Innoveters Interview Questions and Answers

Q1. What is split horison? How can we resolve it?
Ans. 
Split horizon is a technique used in computer networking to prevent routing loops by not advertising routes back to the same interface they were learned from.
• Split horizon is used in distance-vector routing protocols like RIP to prevent routing loops.

• It works by not advertising routes back to the same interface they were learned from.

• Split horizon with poison reverse takes this a step further by advertising the route w...read more
Answered by AI
Add your answer
Q2. What is BGP? How BGP works?
Ans. 
BGP stands for Border Gateway Protocol, used to exchange routing information between different networks.
• BGP is an exterior gateway protocol used to make routing decisions on the internet.

• It operates by exchanging routing information between different autonomous systems (AS).

• BGP uses TCP port 179 for communication.

• BGP routers maintain a table of IP prefixes and their paths to reach them.

• BGP can be configured to influenc...read more
Answered by AI
Add your answer
Q3. What are the type of BGP and their AD value?
Ans. 
There are two types of BGP: eBGP and iBGP. eBGP has an AD value of 20, while iBGP has an AD value of 200.
• eBGP (External BGP) - AD value: 20

• iBGP (Internal BGP) - AD value: 200
Answered by AI
Add your answer
Q4. What is routing protocol? What are the types of routing protocol?
Ans. 
Routing protocol is a set of rules used by routers to determine the best path for data packets to travel.
• Routing protocols help routers communicate with each other to dynamically update routing tables.

• Types of routing protocols include distance-vector (e.g. RIP), link-state (e.g. OSPF), and hybrid (e.g. EIGRP).

• Distance-vector protocols determine the best path based on hop count.

• Link-state protocols use a more complex a...read more
Answered by AI
Add your answer
Q5. What is ospf?
Ans. 
OSPF (Open Shortest Path First) is a routing protocol used to determine the best path for data packets in a network.
• OSPF is a link-state routing protocol

• It uses Dijkstra's algorithm to calculate the shortest path

• OSPF routers exchange link-state advertisements (LSAs) to build a topology map

• It supports VLSM (Variable Length Subnet Masking) and CIDR (Classless Inter-Domain Routing)

• OSPF divides the network into areas to re
Answered by AI
Add your answer
Q6. How do we prevent loop avoidance in BGP?
Ans. 
Preventing loop avoidance in BGP involves using loop prevention mechanisms like AS Path and Route Reflectors.
• Use AS Path attribute to prevent loops by tracking the path a route has taken through AS numbers.

• Implement Route Reflectors to avoid loops in BGP by controlling the route propagation within a cluster.

• Utilize BGP Confederations to divide the network into smaller autonomous systems to prevent loops.

• Regularly monit...read more
Answered by AI
Add your answer
Q7. What is OSI model? What are the layers of OSI model?
Ans. 
The OSI model is a conceptual framework that standardizes the functions of a telecommunication or computing system into seven layers.
• The OSI model stands for Open Systems Interconnection model.

• It helps in understanding how data is transferred from one computer to another over a network.

• The seven layers of OSI model are: Physical, Data Link, Network, Transport, Session, Presentation, and Application.

• Each layer has speci...read more
Answered by AI
Add your answer
Q8. How does tracerout works?
Ans. 
Traceroute is a network diagnostic tool used to track the path packets take from one networked device to another.
• Traceroute sends packets with increasing TTL values to determine the path to a destination.

• Each router along the path sends back an ICMP Time Exceeded message, allowing traceroute to map the route.

• The final destination sends an ICMP Port Unreachable message, indicating the end of the route.

• Traceroute helps i...read more
Answered by AI
Add your answer
Q9. If we see "*****" in tracerout, what it means?
Ans. 
The presence of '*****' in a traceroute indicates that the router is blocking the ICMP packets used by traceroute.
• The '*****' indicates that the router is not responding to the ICMP packets sent by the traceroute tool.

• This could be due to the router being configured to block ICMP traffic for security reasons.

• It can also be caused by a firewall or network filtering rules blocking the ICMP packets.

• In some cases, the '***...read more
Answered by AI
Add your answer
Q10. What are the states in BGP?
Ans. 
BGP states include Idle, Connect, Active, OpenSent, OpenConfirm, Established.
• Idle - Initial state when BGP is not yet established

• Connect - Attempting to establish a TCP connection

• Active - Waiting for a TCP connection to be completed

• OpenSent - Sent an Open message to peer

• OpenConfirm - Received an Open message and waiting for confirmation

• Established - BGP peers are fully established and can exchange routing information
Answered by AI
Add your answer
Q11. If there is a non tech guys on site to replace faulty router with new router, how do you configure the new router?
Ans. 
The new router can be configured remotely using a laptop or mobile device with access to the network.
• Access the router's web interface by entering its IP address in a web browser

• Login using default credentials or credentials provided by the company

• Configure basic settings such as SSID, password, and security settings

• Update firmware if necessary

• Test the connection to ensure it is working properly
Answered by AI
Add your answer
Q12. What are CE and PE routers?
Ans. 
CE and PE routers are types of routers used in MPLS networks. CE routers connect to customer networks while PE routers connect to provider networks.
• CE routers (Customer Edge) connect to customer networks and are responsible for exchanging routes with customer devices.

• PE routers (Provider Edge) connect to provider networks and are responsible for exchanging routes with other PE routers in the MPLS network.

• CE routers are...read more
Answered by AI
Add your answer
Q13. What is the command to assign an IP address on Juniper router interface?
Ans. 
The command to assign an IP address on a Juniper router interface is 'set interface <interface_name> unit <unit_number> family inet address <ip_address/mask>'
• Use the 'set' command to configure the interface

• Specify the interface name and unit number

• Use the 'family inet' statement to configure an IPv4 address

• Specify the IP address and subnet mask
Answered by AI
Add your answer
Q14. What are the parameters should match in BGP neighbourship?
Ans. 
Parameters for BGP neighbourship include AS number, IP address, subnet mask, and BGP version.
• AS number must match on both neighbors

• IP address must be reachable between neighbors

• Subnet mask should be the same on both neighbors

• BGP version should be compatible between neighbors
Answered by AI
Add your answer
Q15. What is tftp?
Ans. 
tftp stands for Trivial File Transfer Protocol, a simple protocol used for transferring files over a network.
• tftp is a lightweight protocol used for transferring files between devices on a network.

• It operates on UDP port 69.

• tftp does not require user authentication, making it less secure compared to FTP.

• It is commonly used for booting devices over a network, such as in diskless workstations or routers.

• An example of tft...read more
Answered by AI
Add your answer

Q1. What is loop avoidance mechanism in BGP?
Ans. 
Loop avoidance mechanism in BGP prevents routing loops by using loop prevention mechanisms like AS path attribute and route reflectors.
• BGP uses AS path attribute to prevent routing loops by not accepting routes with its own AS number in the path.

• Route reflectors are used in BGP to avoid loops in route propagation within a cluster of routers.

• BGP Confederations can also be used to prevent loops by dividing the AS into sm
Answered by AI
Add your answer
Q2. How tracerout works? What is source and destination IP?
Ans. 
Traceroute is a network diagnostic tool used to track the path packets take from source to destination IP.
• Traceroute sends packets with increasing TTL values to elicit ICMP Time Exceeded responses from routers along the path.

• The source IP is the IP address of the device initiating the traceroute, while the destination IP is the IP address of the target device.

• Traceroute displays the IP addresses of the routers in the p...read more
Answered by AI
Add your answer
Q3. What is public IP and private IP?
Ans. 
Public IP is the address assigned to a device that is directly accessible over the internet, while private IP is used within a private network.
• Public IP is unique and can be accessed from anywhere on the internet

• Private IP is used within a local network and is not directly accessible from the internet

• Public IP is assigned by the Internet Service Provider (ISP)

• Private IP addresses are typically in the ranges of 192.168.
Answered by AI
Add your answer
Q4. How can we configure and a router with support of non tech guy onsite?
Ans. 
To configure a router with support of a non tech guy onsite, provide step-by-step instructions and visual aids.
• Create a simple, easy-to-follow guide with step-by-step instructions.

• Use visual aids such as diagrams or videos to demonstrate the process.

• Provide clear explanations of each step and troubleshoot common issues.

• Offer remote support or a helpline for additional assistance if needed.
Answered by AI
Add your answer
Q5. What is firewall?
Ans. 
A firewall is a network security system that monitors and controls incoming and outgoing network traffic based on predetermined security rules.
• Acts as a barrier between a trusted internal network and untrusted external network

• Filters network traffic based on rules set by the administrator

• Can be hardware-based or software-based

• Examples include Cisco ASA, Palo Alto Networks, and Windows Firewall
Answered by AI
Add your answer
Q6. What are the difference between router and switch?
Ans. 
Routers connect multiple networks together while switches connect devices within a single network.
• Routers operate at the network layer (Layer 3) of the OSI model, while switches operate at the data link layer (Layer 2).

• Routers use IP addresses to forward data between networks, while switches use MAC addresses to forward data within a network.

• Routers can determine the best path for data to travel between networks, while...read more
Answered by AI
Add your answer
Q7. What is mpls?
Ans. 
MPLS stands for Multiprotocol Label Switching, a technique used in telecommunications networks to direct data packets along predefined paths.
• MPLS is used to improve network performance and efficiency by quickly routing data packets based on labels instead of IP addresses.

• It allows for traffic engineering, quality of service (QoS) prioritization, and virtual private network (VPN) services.

• MPLS operates at layer 2.5 of t...read more
Answered by AI
Add your answer
Q8. How ftp and tftp works?
Ans. 
FTP and TFTP are protocols used for transferring files over a network.
• FTP (File Transfer Protocol) is a standard network protocol used to transfer files from one host to another over a TCP-based network, such as the internet.

• TFTP (Trivial File Transfer Protocol) is a simpler version of FTP that uses UDP instead of TCP for file transfer.

• FTP requires authentication (username and password) for access, while TFTP does not ...read more
Answered by AI
Add your answer

Process planning refers to the methodical approach of determining the best possible way to manufacture a product or deliver a service by considering various aspects such as resources, timelines, and methodologies involved in production or execution.

Q1. Explain about previous process
Add your answer
Q2. Explain about my work experience
Add your answer
Q3. Explain about my work standard
Add your answer
Q4. Explain about my managing method
Add your answer
Q5. Explain about my working style
Add your answer

Q1. What is the difference between a development dependency and a regular dependency in software development?
Ans. 
Development dependencies are needed for development and testing, while regular dependencies are needed for the application to run.
• Development dependencies are used during the development process, such as testing frameworks or build tools.

• Regular dependencies are required for the application to function properly in production.

• Development dependencies are typically listed in the devDependencies section of package.json, w...read more
Answered by AI
Add your answer
Q2. What do the symbols ^ and ~ represent in the package.json file?
Ans. 
Symbols ^ and ~ in package.json represent version ranges for dependencies.
• The symbol ^ represents a range that allows minor version updates.

• The symbol ~ represents a range that allows only patch updates.

• For example, ^1.2.3 allows any version from 1.2.3 to <2.0.0, while ~1.2.3 allows any version from 1.2.3 to <1.3.0.
Answered by AI
Add your answer
Q3. How can a 404 page be handled in React routing?
Ans. 
404 page can be handled in React routing by creating a Route component with a path of '*' at the end of all other routes.
• Create a Route component with a path of '*' at the end of all other routes in the Switch component.

• Inside the '*' Route component, render a custom 404 page component.

• Use the Switch component to ensure that only one Route is rendered at a time.
Answered by AI
Add your answer
Q4. Some Javascript coding questions.
Add your answer
Q5. What is the component lifecycle in functional components?
Ans. 
Component lifecycle in functional components involves useEffect hook for side effects.
• Functional components use useEffect hook to handle side effects like fetching data, subscribing to events, etc.

• useEffect hook can be used to mimic componentDidMount, componentDidUpdate, and componentWillUnmount lifecycle methods.

• useEffect hook takes a callback function as its first argument and an optional array of dependencies as its...read more
Answered by AI
Add your answer
Q6. Explain redux data flow
Ans. 
Redux data flow is a unidirectional flow of data in React applications using a centralized store.
• Actions are dispatched to the store

• Reducers update the state based on the action

• Components subscribe to the store to access the updated state
Answered by AI
Add your answer

Q1. How much exp in docker?
Ans. 
I have 2 years of experience working with Docker in various projects.
• 2 years of experience working with Docker in various projects

• Proficient in creating Docker containers, managing images, and orchestrating containers using Docker Compose

• Familiar with Docker Swarm and Kubernetes for container orchestration

• Experience in troubleshooting Docker-related issues and optimizing container performance
Answered by AI
Add your answer
Q2. Do you have exp in Kubernetes?
Ans. 
Yes, I have experience in Kubernetes.
• I have worked on deploying and managing applications on Kubernetes clusters.

• I am familiar with creating and managing Kubernetes resources such as pods, deployments, services, and ingresses.

• I have experience in using tools like kubectl and Helm for interacting with Kubernetes clusters.

• I have implemented CI/CD pipelines using Kubernetes for automated deployment and scaling of applicat
Answered by AI
Add your answer
Q3. What is OOP?
Ans. 
OOP stands for Object-Oriented Programming, a programming paradigm based on the concept of objects.
• OOP focuses on creating objects that contain data and methods to manipulate that data.

• Encapsulation, inheritance, and polymorphism are key principles of OOP.

• Examples of OOP languages include Java, C++, and Python.
Answered by AI
Add your answer
Q4. Types of polymorphism
Ans. 
Polymorphism in Java refers to the ability of a method to do different things based on the object it is acting upon.
• Types of polymorphism in Java include method overloading and method overriding.

• Method overloading is when multiple methods have the same name but different parameters.

• Method overriding is when a subclass provides a specific implementation of a method that is already defined in its superclass.
Answered by AI
Add your answer
Q5. Thread in java
Ans. 
Threads in Java allow multiple tasks to run concurrently within a single program.
• Threads are lightweight sub-processes that share the same memory space.

• They are used to improve performance by allowing tasks to run simultaneously.

• Examples include creating a new thread using the Thread class or implementing the Runnable interface.
Answered by AI
Add your answer
Q6. Knowledge in which spring modules
Add your answer
Q7. What is spring profile
Ans. 
Spring profile is a way to segregate parts of your application configuration and make it only available in certain environments.
• Spring profiles allow you to define different configurations for different environments such as development, testing, and production.

• You can use @Profile annotation to specify which beans should be loaded based on the active profile.

• Profiles can be activated in various ways such as through app...read more
Answered by AI
Add your answer
Q8. What is @PreAuthorize and @PostAuthorize
Ans. 
Annotations used in Spring Security to apply authorization rules before and after a method is called.
• Used in Spring Security to define authorization rules

• @PreAuthorize is used to apply authorization rules before a method is called

• @PostAuthorize is used to apply authorization rules after a method is called

• Both annotations support SpEL expressions for defining rules
Answered by AI
Add your answer

Q1. What is hash technology?
Add your answer
Q2. What is block chain?
Add your answer
Q3. What is DML?
Add your answer
Q4. Convert binay to decimal and viceversa.
Add your answer
Q5. Find max number in array?
Add your answer
Q6. Write basic html , for inserting image and create table.
Add your answer

Q1. How many variance in sap?
Ans. 
The number of variances in SAP can vary depending on the specific processes and transactions being analyzed.
• The number of variances in SAP can be influenced by factors such as data entry errors, system glitches, or discrepancies in invoice processing.

• Variances in SAP may be identified through reconciliation processes, exception reports, or manual reviews of accounts payable transactions.

• Examples of variances in SAP inc...read more
Answered by AI
Add your answer
Q2. We cac explain the all accounts receivable and accounts payable
Ans. 
Accounts receivable and accounts payable are two important aspects of a company's financial operations.
• Accounts receivable refers to money owed to a company by its customers for goods or services provided.

• Accounts payable refers to money owed by a company to its suppliers or vendors for goods or services received.

• Accounts receivable is an asset on the balance sheet, while accounts payable is a liability.

• Managing accoun...read more
Answered by AI
Add your answer
Q3. What is the cost element and cost center?
Ans. 
Cost element and cost center are key concepts in accounting for tracking and allocating costs within an organization.
• Cost element refers to the specific types of costs incurred by an organization, such as materials, labor, or overhead.

• Cost center is a specific department, team, or function within an organization that is responsible for incurring costs.

• Cost elements are assigned to cost centers to track and allocate cos...read more
Answered by AI
Add your answer
Q4. How many we have currencies in sap?
Ans. 
SAP supports over 160 currencies worldwide.
• SAP supports over 160 currencies for global transactions.

• Currencies can be configured in SAP using transaction code OB22.

• Each currency is assigned a unique currency code (e.g. USD for US Dollar, EUR for Euro).
Answered by AI
Add your answer
Q5. How many types of projects
Ans. 
There are various types of projects, including internal projects, external projects, research projects, and development projects.
• Internal projects focus on improving processes within the organization.

• External projects involve working with external partners or clients.

• Research projects aim to gather data and analyze findings.

• Development projects focus on creating new products or services.

• Examples: IT system implementati...read more
Answered by AI
Add your answer

Q1. Azure cloud platform tech
Add your answer
Q2. Informatica tech stack ques
Add your answer

Q1. Adf tech stack que
Add your answer
Q2. Scd type 2 implementation
Ans. 
SCD Type 2 implementation involves tracking historical changes in data by creating new records for each change.
• Identify the columns that need to be tracked for changes

• Add effective start and end dates to track the validity of each record

• Insert new records for changes and update end dates for previous records

• Maintain a surrogate key to uniquely identify each version of the record
Answered by AI
Add your answer

Q1. Dw related que ans
Add your answer
Q2. Solution design related que
Add your answer

Q1. Aspiration from my end
Add your answer
Q2. How soon can join
Ans. 
I can join the team within 2 weeks.
• I can start within 2 weeks of receiving the offer.

• I need to give notice to my current employer.

• I may need to relocate, which could affect my start date.
Answered by AI
Add your answer

Q1. What are the causes of NWA.
Add your answer
Q2. What are the main causes of low data speed?
Add your answer

Q1. What are DCR, MCR, and SSSR?
Add your answer
Q2. What are the strategies for improving CQI?
Add your answer

Q1. Background, introduction
Add your answer
Q2. Family details
Add your answer

Q1. Questions related to the CMS which I worked on.
Add your answer
Q2. Questions related to the CMS
Add your answer

Q1. What kind of role do you want
Add your answer
Q2. What kind of work you were doing
Add your answer