AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Rio Tinto Advisor Interview Questions, Process, and Tips
Top Rio Tinto Advisor Interview Questions and Answers
- Q1. What is accounting cycle P2p cycle Fixed asset process flow Chart of accouts Journal entries
- Q2. What is Asset under construction
- Q3. What is life cycle of asset
Rio Tinto Advisor Interview Experiences
2 interviews found
Anonymous
Selected
I applied via Approached by Company and was interviewed in May 2024. There were 2 interview rounds.
(2 Questions)
- Q1. What is life cycle of asset
- Ans.
The life cycle of an asset refers to the stages it goes through from acquisition to disposal.
Acquisition: The asset is obtained and put into use.
Utilization: The asset is used for its intended purpose.
Maintenance: Regular maintenance and repairs are performed to ensure optimal performance.
Depreciation: The asset loses value over time due to wear and tear.
Disposal: The asset is either sold, scrapped, or otherwise dispos...
- Q2. Difference between depreciation and amortization
- Ans.
Depreciation is for tangible assets like buildings and machinery, while amortization is for intangible assets like patents and copyrights.
Depreciation is the allocation of the cost of tangible assets over their useful life.
Amortization is the allocation of the cost of intangible assets over their useful life.
Depreciation is typically used for assets like buildings, machinery, and vehicles.
Amortization is typically used...
(2 Questions)
- Q1. What is Asset under construction
- Ans.
Asset under construction refers to assets that are being constructed or developed but are not yet completed and ready for use.
Assets under construction are not yet in use and are still being developed or built.
These assets are typically recorded as a separate category on the balance sheet until they are completed and ready for use.
Examples include buildings, machinery, and infrastructure projects that are still in the
- Q2. What is Asset revaluation
- Ans.
Asset revaluation is the process of adjusting the value of assets on a company's balance sheet to reflect their current market value.
Asset revaluation is typically done to ensure that the assets are not carried on the balance sheet at a value that is significantly different from their current market value.
Revaluation can result in an increase or decrease in the value of assets, which can impact the company's financial ...
Interview Preparation Tips
- Fixed Assets
- Depreciation
- Amortization
- Sale of fixed asset
(5 Questions)
- Q1. What is accounting cycle P2p cycle Fixed asset process flow Chart of accouts Journal entries
- Ans.
The accounting cycle is the process of recording, summarizing, and analyzing financial transactions of a business.
The accounting cycle typically includes steps such as journalizing transactions, posting to the general ledger, preparing trial balances, adjusting entries, preparing financial statements, and closing entries.
P2P cycle refers to the procure-to-pay process, which involves purchasing goods or services, receiv...
- Q2. Logcal thinking People management Team player
- Ans. Work with dedication to get result not just for the sake of completion of work.
- Q3. Situation based scenario
- Q4. Handling the pressure
- Q5. Ready to help team member always
Interview Preparation Tips
Interview questions from similar companies
I applied via Company Website and was interviewed in Dec 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Technical and administrative
Interview Preparation Tips
2. Answer must be to the point and relevant to the question asked.
3. Short and crisp.
4. No superfluous information or no jugglery of words.
I applied via Naukri.com and was interviewed before Jan 2021. There were 3 interview rounds.
Interview Questionnaire
5 Questions
- Q1. Chemical analysis of chromite ore by ICP OES
- Ans.
ICP OES is a technique used for chemical analysis of chromite ore.
ICP OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.
It is a powerful analytical technique used for the determination of trace elements in a variety of matrices.
ICP OES can be used to determine the concentration of elements such as Cr, Fe, Mg, Al, and Si in chromite ore.
The technique involves the excitation of atoms in a sample usi...
- Q2. Principle of ICP oes
- Ans.
ICP-OES is a technique used for elemental analysis in which a sample is vaporized and excited by a plasma to emit light.
ICP-OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.
It is used to determine the concentration of elements in a sample.
The sample is vaporized and excited by a plasma to emit light, which is then analyzed to determine the elemental composition.
ICP-OES is commonly used in environ...
- Q3. Weight chemical analysis of chromite ore
- Ans.
Weight chemical analysis of chromite ore involves determining the percentage of various elements present in the ore.
The ore is first crushed and ground into a fine powder.
The powder is then mixed with various chemicals to dissolve the elements of interest.
The resulting solution is then analyzed using various techniques such as atomic absorption spectroscopy or inductively coupled plasma mass spectrometry.
The percentage...
- Q4. Knowledge of NABL
- Q5. Knowledge of ISO 17025,ISO 9001,ISO 450001, IMS
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Feb 2023. There were 3 interview rounds.
(1 Question)
- Q1. About yourself and accounting questions
(4 Questions)
- Q1. Accounting questions
- Q2. Basic accounting
- Q3. TDS sections checking Points of Vendor invoice
- Ans.
TDS sections in vendor invoices must be checked for accuracy and compliance.
Verify if TDS has been deducted as per the correct section of the Income Tax Act
Check if the TDS rate applied is accurate based on the nature of payment
Ensure that the TDS amount deducted is correctly mentioned on the invoice
Confirm that the TDS amount has been deposited to the government within the specified timeline
- Q4. GST intra and inter state
I applied via Job Portal and was interviewed before Nov 2021. There were 3 interview rounds.
Direct through campus placement and group discussion.
(2 Questions)
- Q1. All the studies related concepts were aksed
- Q2. About COST ACCOUNTING STANDARDS
Interview Preparation Tips
I applied via Recruitment Consulltant and was interviewed in Aug 2024. There was 1 interview round.
(2 Questions)
- Q1. Your job details
- Q2. Regrading your job handling
- Ans.
I have extensive experience in handling various job responsibilities, including project management, client communication, and team coordination.
Managed multiple projects simultaneously
Effectively communicated with clients to understand their needs and provide updates
Coordinated with team members to ensure tasks were completed on time and within budget
Interview Preparation Tips
Selected
I applied via Job Portal and was interviewed in Dec 2023. There was 1 interview round.
(3 Questions)
- Q1. Types of fire extinguisher and chemical composition
- Ans.
Types of fire extinguishers include water, foam, CO2, dry chemical, and wet chemical.
Water extinguishers - contain water and are used for Class A fires
Foam extinguishers - contain foam and are used for Class A and B fires
CO2 extinguishers - contain carbon dioxide and are used for Class B and C fires
Dry chemical extinguishers - contain dry chemical powder and are used for Class A, B, and C fires
Wet chemical extinguisher...
- Q2. Conveyor safety system
- Q3. Mechanical law and types
Interview Preparation Tips
I applied via Company Website and was interviewed in Aug 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. When I joint with company can I do work from home
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed in Mar 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Plant overview and process
- Q2. Rankine cycle process and efficiency
- Ans.
Rankine cycle is a thermodynamic cycle used in power plants to generate electricity.
Rankine cycle is a closed-loop cycle that uses steam to generate power.
The cycle consists of four processes: heating, vaporization, expansion, and condensation.
The efficiency of the Rankine cycle can be improved by increasing the temperature and pressure of the steam.
The Rankine cycle is commonly used in power plants to generate electri...
Rio Tinto Interview FAQs
Tell us how to improve this page.
Rio Tinto Interviews By Designations
- Rio Tinto Graduate Engineer Trainee (Get) Interview Questions
- Rio Tinto Analyst Interview Questions
- Rio Tinto Senior Analyst Interview Questions
- Rio Tinto Advisor Interview Questions
- Rio Tinto Project Coordinator Interview Questions
- Rio Tinto Financial Advisor Interview Questions
- Rio Tinto Senior Associate Interview Questions
- Rio Tinto Senior Accounts Executive Interview Questions
- Show more
Interview Questions for Popular Designations
- Monitoring Engineer Interview Questions
- Quality Head Interview Questions
- Junior QA Engineer Interview Questions
- Senior Sharepoint Developer Interview Questions
- Vendor Development Engineer Interview Questions
- Headmaster Interview Questions
- Tax Analyst Interview Questions
- Application Support Engineer Interview Questions
- Show more
Rio Tinto Advisor Interview Process
based on 3 interviews
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
Rio Tinto Advisor Reviews and Ratings
based on 16 reviews
Rating in categories
|
Senior Associate
132
salaries
|  ₹4.6 L/yr - ₹7.5 L/yr |
|
Advisor
113
salaries
| ₹10 L/yr - ₹24 L/yr |
|
Senior Analyst
90
salaries
| ₹8.3 L/yr - ₹15 L/yr |
|
Analyst
69
salaries
| ₹4.3 L/yr - ₹10.8 L/yr |
|
Senior Advisor
60
salaries
| ₹18 L/yr - ₹45 L/yr |
Vedanta Resources
Hindalco Industries
Tata Steel
JSW Steel
- Home >
- Interviews >
- Rio Tinto Interview Questions >
- Rio Tinto Advisor Interview Questions
