AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Rich Graviss Products Scada Operator Interview Questions and Answers
7 Interview questions
To check pH and TDS of water, use a pH meter and a TDS meter respectively.
Use a pH meter to measure the pH level of water
Use a TDS meter to measure the total dissolved solids in water
Calibrate the meters before use
Follow the manufacturer's instructions for accurate readings
SCADA stands for Supervisory Control and Data Acquisition.
SCADA is a system used to monitor and control industrial processes.
It collects data from sensors and devices and displays it to operators.
Operators can use SCADA to make decisions and control processes remotely.
SCADA is used in industries such as manufacturing, energy, and water treatment.
Examples of SCADA software include Wonderware, Ignition, and GE Digit...
Quality defects in batches require immediate investigation, corrective actions, and preventive measures to ensure product integrity.
Identify the nature of the defects: For example, if there are issues with product consistency, analyze the production process.
Conduct a root cause analysis: Use tools like the 5 Whys or Fishbone diagram to determine why the defects occurred.
Implement corrective actions: If a specific ...
CIP stands for Clean-in-Place. Chemicals like sodium hydroxide and phosphoric acid are used for CIP. Concentration varies based on the equipment being cleaned. pH neutralization is done using acid or base depending on the cleaning chemical used.
CIP is a cleaning process used in industries like food and beverage, pharmaceuticals, and cosmetics.
Chemicals like sodium hydroxide and phosphoric acid are commonly used fo...
Gmp, Ghp, haccp are quality management systems used in food industry. OPRP and CCP are critical control points in HACCP.
Gmp - Good Manufacturing Practices ensure that products are consistently produced and controlled according to quality standards.
Ghp - Good Hygiene Practices ensure that food is handled and prepared in a safe and hygienic manner.
HACCP - Hazard Analysis and Critical Control Points is a systematic a...
LOTO stands for Lockout/Tagout. It is a safety procedure used to ensure that dangerous machines are properly shut off and not started up again prior to the completion of maintenance or repair work.
LOTO is used to prevent accidental start-up of machinery during maintenance or repair work
It involves locking and tagging the machinery to prevent unauthorized access
The procedure includes isolating the machinery from it...
The number of permits required in a food factory depends on the type of operation and location.
The number of permits needed varies depending on the type of food being produced and the location of the factory.
Permits may be required for food safety, environmental regulations, and building codes.
Examples of permits include food handling permits, wastewater discharge permits, and building permits.
The specific permits...
Rich Graviss Products Scada Operator Interview Experiences
1 interview found
Anonymous
Interview Questionnaire
8 Questions
- Q1. What is Gmp, Ghp, haccp? What is OPRP, CCP.
- Ans.
Gmp, Ghp, haccp are quality management systems used in food industry. OPRP and CCP are critical control points in HACCP.
Gmp - Good Manufacturing Practices ensure that products are consistently produced and controlled according to quality standards.
Ghp - Good Hygiene Practices ensure that food is handled and prepared in a safe and hygienic manner.
HACCP - Hazard Analysis and Critical Control Points is a systematic approa...
- Q2. What is scada?
- Ans.
SCADA stands for Supervisory Control and Data Acquisition.
SCADA is a system used to monitor and control industrial processes.
It collects data from sensors and devices and displays it to operators.
Operators can use SCADA to make decisions and control processes remotely.
SCADA is used in industries such as manufacturing, energy, and water treatment.
Examples of SCADA software include Wonderware, Ignition, and GE Digital.
- Q3. What is CIP , which chemical use for cip and how much constration of chemical in water. How to check cip water, ph neutralation.
- Ans.
CIP stands for Clean-in-Place. Chemicals like sodium hydroxide and phosphoric acid are used for CIP. Concentration varies based on the equipment being cleaned. pH neutralization is done using acid or base depending on the cleaning chemical used.
CIP is a cleaning process used in industries like food and beverage, pharmaceuticals, and cosmetics.
Chemicals like sodium hydroxide and phosphoric acid are commonly used for CIP...
- Q4. How much permits use in food factory?
- Ans.
The number of permits required in a food factory depends on the type of operation and location.
The number of permits needed varies depending on the type of food being produced and the location of the factory.
Permits may be required for food safety, environmental regulations, and building codes.
Examples of permits include food handling permits, wastewater discharge permits, and building permits.
The specific permits requ...
- Q5. What is Loto? Why use loto? How Procedure of loto?
- Ans.
LOTO stands for Lockout/Tagout. It is a safety procedure used to ensure that dangerous machines are properly shut off and not started up again prior to the completion of maintenance or repair work.
LOTO is used to prevent accidental start-up of machinery during maintenance or repair work
It involves locking and tagging the machinery to prevent unauthorized access
The procedure includes isolating the machinery from its ene...
- Q6. Batch me kuch quality defects aye to kya karoge?
- Ans.
Quality defects in batches require immediate investigation, corrective actions, and preventive measures to ensure product integrity.
Identify the nature of the defects: For example, if there are issues with product consistency, analyze the production process.
Conduct a root cause analysis: Use tools like the 5 Whys or Fishbone diagram to determine why the defects occurred.
Implement corrective actions: If a specific machi...
- Q7. How to check ph, tds of water?
- Ans.
To check pH and TDS of water, use a pH meter and a TDS meter respectively.
Use a pH meter to measure the pH level of water
Use a TDS meter to measure the total dissolved solids in water
Calibrate the meters before use
Follow the manufacturer's instructions for accurate readings
- Q8. Fssai, ccp, oprp full form, what is different ccp and oprp?
Top trending discussions
Interview questions from similar companies
I appeared for an interview before Dec 2021.
(1 Question)
- Q1. Intro about yourself and role
(1 Question)
- Q1. Details of work done
(1 Question)
- Q1. Skill set should be clear
Interview Preparation Tips
I applied via Recruitment Consultant and was interviewed before Dec 2019. There were 4 interview rounds.
Interview Questionnaire
2 Questions
- Q1. How to calculate the landing price to retailer, and distributor, on mark up basis.
- Q2. What would be lctr for other brands at 15% markup margin.
Interview Preparation Tips
I applied via Naukri.com and was interviewed before Apr 2021. There were 2 interview rounds.
Interview Preparation Tips
Selected
I applied via Approached by Company and was interviewed before Mar 2023. There were 2 interview rounds.
Good attitude and nature of interviewer
(1 Question)
- Q1. Previous company role and responsibilities
(2 Questions)
- Q1. ASM 1ST ROUND because Ask questions ROI,BEAT PLAN,
- Q2. Second round ZSM
(1 Question)
- Q1. Beat wise unbilled Outlet,roi ,Vlookup
Interview Preparation Tips
Selected
I appeared for an interview before Jun 2024, where I was asked the following questions.
- Q1. Past company working style
- Ans.
My past company emphasized collaboration, customer-centric strategies, and continuous improvement to drive sales success.
Team Collaboration: Regular brainstorming sessions led to innovative sales strategies, boosting team morale and performance.
Customer-Centric Approach: We prioritized understanding customer needs, which resulted in a 20% increase in client retention.
Data-Driven Decisions: Utilized analytics to identif...
- Q2. Work experience
Selected
I applied via Naukri.com and was interviewed before Sep 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Normal questions are there Roi, ND, WD
- Q2. Everything depends on your confidence
Interview Preparation Tips
Sanjeet Solanki
Selected
I applied via Recruitment Consulltant and was interviewed before Mar 2023. There were 3 interview rounds.
(2 Questions)
- Q1. Calculate ROI of dostributor
- Q2. Beat mapping of sales man
- Ans.
Beat mapping of sales man involves analyzing their sales performance over time to identify patterns and trends.
Track sales data regularly to identify peak selling times and slow periods
Use CRM software to analyze sales metrics and trends
Identify top performing sales strategies and replicate them across the team
Adjust sales tactics based on beat mapping analysis to optimize performance
(2 Questions)
- Q1. Why do you want to join unicharm
- Ans.
I admire Unicharm's commitment to innovation and sustainability, and I want to contribute to its mission of enhancing consumer well-being.
Unicharm's focus on innovation aligns with my passion for developing creative solutions in sales.
The company's commitment to sustainability resonates with my values, as I believe in promoting eco-friendly products.
I am impressed by Unicharm's strong market presence and reputation, wh...
- Q2. Your achievements in previous company
- Ans.
In my previous role, I consistently exceeded sales targets, built strong client relationships, and contributed to team growth.
Achieved 120% of my annual sales target, generating an additional $500,000 in revenue.
Developed a new client onboarding process that reduced the time to close deals by 30%.
Led a team project that improved customer retention rates by 15% through enhanced follow-up strategies.
Received 'Salesperson...
(2 Questions)
- Q1. Salary expectation
- Q2. Your previous activities in your company
- Ans.
In my previous role, I focused on client acquisition, relationship management, and driving sales growth through strategic initiatives.
Developed and executed sales strategies that increased revenue by 20% within one year.
Managed a portfolio of over 50 clients, ensuring high levels of customer satisfaction and retention.
Conducted market research to identify new business opportunities and emerging trends.
Collaborated with...
Selected
I applied via Recruitment Consulltant and was interviewed before Mar 2023. There were 3 interview rounds.
(1 Question)
- Q1. Current job role regarding
(2 Questions)
- Q1. Coverage related
- Q2. Coverage related and current job role
(1 Question)
- Q1. Just Negotiations
Rich Graviss Products Interview FAQs
Tell us how to improve this page.
Rich Graviss Products Interviews By Designations
- Rich Graviss Products Sales Executive Interview Questions
- Rich Graviss Products Senior Sales Executive Interview Questions
- Rich Graviss Products Maintenance Engineer Interview Questions
- Rich Graviss Products Chef DE Partie Interview Questions
- Rich Graviss Products Territory Sales Executive Interview Questions
- Rich Graviss Products Senior Executive Logistics Interview Questions
- Rich Graviss Products Executive Mechanical Maintenance Interview Questions
- Rich Graviss Products Scada Operator Interview Questions
- Show more
Interview Questions for Popular Designations
Interview Questions from Similar Companies
Rich Graviss Products Scada Operator Reviews and Ratings
based on 2 reviews
Rating in categories
|
Sales Executive
99
salaries
|  ₹3.2 L/yr - ₹7.4 L/yr |
|
Senior Sales Executive
27
salaries
| ₹3.5 L/yr - ₹7.8 L/yr |
|
Production Officer
13
salaries
| ₹3 L/yr - ₹4.5 L/yr |
|
Area Sales Manager
13
salaries
| ₹6.9 L/yr - ₹15 L/yr |
|
Sales Manager
12
salaries
| ₹13.5 L/yr - ₹18 L/yr |
RSPL Group
Parle Products
Reckitt Benckiser
Unicharm
- Home >
- Interviews >
- Rich Graviss Products Interview Questions
