AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
Prospect Engineering Works
Compare
Filter interviews by
Prospect Engineering Works Design Engineer Interview Questions and Answers
Prospect Engineering Works Design Engineer Interview Experiences
1 interview found
(1 Question)
- Q1. Explain GD&T and its uses?
- Ans.
GD&T stands for Geometric Dimensioning and Tolerancing. It is a system for defining and communicating engineering tolerances.
GD&T is used to specify the allowable variations in form, size, and orientation of features on a part.
It helps ensure that parts fit together properly and function as intended.
GD&T uses symbols, such as concentricity, flatness, and perpendicularity, to communicate design requirements.
It is common...
Skills evaluated in this interview
Top trending discussions
Interview questions from similar companies
Design Engineer Interview Questions & Answers
Seoyon E-hwa Automotive
Anonymous
posted on 28 Feb 2024
I applied via Referral and was interviewed in Jan 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Tool test on catia v5
- Ans. A tool test will be conducted on catia v5 either a part or surface design
- Q2. Model the given part from the 2d drawings
(1 Question)
- Q1. Fundamental questions regarding plastic design, gd&t, catia v5 and engineering drawing.
Interview Preparation Tips
- Automotive plastic design using v5
- Gd&t
- Catia v5
Senior Engineer Interview Questions & Answers
Enco Engineers Combine
Anonymous
posted on 17 Jan 2024
Selected
I appeared for an interview in Dec 2023.
(1 Question)
- Q1. Past experiences & qualification , job flexibility
(1 Question)
- Q1. Tool room related
Reasoning, enlish , appitude
(1 Question)
- Q1. Job leave resonal , future planing
(5 Questions)
- Q1. Embedded C questions
- Q2. Watchdog Timer, I2C, SPI, UART
- Q3. Design State Machine
- Q4. Mix Sound Driver
- Q5. Renesas related
Interview Preparation Tips
Parthiban Srinivasan
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There were 3 interview rounds.
(3 Questions)
- Q1. Bootloader related UDS services
- Q2. HSM and flash driver
- Q3. Startup code sequence
- Ans.
Startup code sequence refers to the order in which code is executed when a program is launched.
Startup code sequence typically involves initializing variables, setting up memory, and executing any necessary setup functions.
Examples of startup code sequence include setting up hardware registers in embedded systems, initializing global variables in C programs, and loading configuration files in web applications.
(3 Questions)
- Q1. Are you ready to work on weekends
- Ans.
Yes, I am willing to work on weekends if necessary to meet project deadlines or address urgent issues.
I understand that sometimes working on weekends may be required in order to meet project deadlines or address urgent issues.
I am committed to delivering high-quality work and am willing to put in extra hours when needed.
I am flexible with my schedule and can adjust my plans to accommodate weekend work if necessary.
- Q2. How will you manage conflicts within the team
- Ans.
I will address conflicts by promoting open communication, active listening, and facilitating constructive discussions.
Encourage open communication among team members to address conflicts early on
Practice active listening to understand all perspectives involved
Facilitate constructive discussions to find mutually beneficial solutions
Establish clear team norms and guidelines for conflict resolution
Seek input from team mem...
- Q3. Why are you switching jobs
- Ans.
Seeking new challenges and opportunities for growth in a more innovative and dynamic environment.
Looking for new challenges and opportunities for growth
Interested in working in a more innovative and dynamic environment
Seeking career advancement and professional development
(2 Questions)
- Q1. Salary negotiation and Notice period
- Q2. Why are you switching
- Ans.
Seeking new challenges and opportunities for growth in a different environment.
Looking for new challenges and opportunities for growth
Interested in working with different technologies or industries
Seeking a better work-life balance or company culture
Wanting to expand skill set or take on more responsibilities
Relocation to a new area
Selected
I appeared for an interview before Feb 2024.
(2 Questions)
- Q1. About microcontroller architecture
- Q2. Existing projects and the types of project
(2 Questions)
- Q1. About the ongoing projects and key skills currently working on.
- Q2. Understanding of microcontroller and the architecture.
Interview Preparation Tips
I applied via Recruitment Consulltant and was interviewed in May 2021. There were 4 interview rounds.
(1 Question)
- Q1. Product knowledge such as DIS, Circuit Integration, Process of Complete Design Cycle.
(1 Question)
- Q1. Same sort of questions with some problems to be solved based on power supply sections, current and voltage calculation etc.
(1 Question)
- Q1. Relocation, Salary Negotiation
Interview Preparation Tips
Selected
I applied via LinkedIn and was interviewed in Aug 2023. There were 3 interview rounds.
(2 Questions)
- Q1. General inquiry
- Q2. Background verification
(2 Questions)
- Q1. Experience based questioning
- Q2. Normal interview
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
Caparo Engineering India
Anonymous
posted on 2 Apr 2024
(1 Question)
- Q1. What are your strengths and weakness
Interview Preparation Tips
Experience: Ist round was writtn round, no neg marking (easy but be accurate),
total questions-90 (divided into 3 section) ,time alloted-90 min.
3 sections r as follows:-
sec A - 30 ques, technical(subjects including EDC,AIC,DLD,basic BEE)
sec B- 15 GK+15 quant(RS agrwal is more than enough )
sec C- 30 ques, bacis C and C++ (very easy)
they will judge u section wise
Tips: Most IMPORTANT part of placement is WRITTEN round, we were around 60-70 students in total and out of which only 7 were selected for further rounds
i suggest u all to prepare very well for this round and try to b very accurate,
solve RS agrawal or arun sharma(level 1 and solved question only) for quantitative aptitude, and for C questions solve from online site INDIABIX , you will find all questions are come from here only
Duration: 90 minutes
Total Questions: 90
Round: Technical Interview
Experience: Next is PI technical and questions asked to me :-
1)Tell me about urself(do include brief intro about your internship if u have done any otherwise no problem)
2)About my internship
suddenly he started asked question from C-
3)what is BIT FIELD?, MACROS? ,PREPROCESSOR? ,EXTERN?
4)Diff btw char array and int array?
then he switched to embedded system-
5)What are INTERRUPT?, EEPROM? , BAUD RATE?
6)About my Projects(i suggest u to all tell project related to embedded only)
7)FAV subject and question from it (do prepare atleast 2 subjects very well)
8)What is electronics, Telecommunication?
9)diff btw ETNT AND ECE?
then he asked some HR questions too:-
10)what is your STRENGTH AND WEAKNESS(support your answer with example)
11)where do u see urslf 5 yr from now?
12) hobby?
13) low pointer?
then he asked me to ask question:
i have asked 2 question:
14)who is your biggest competitor?
15)what is the hierarchy of this job post?
Tips: 1ST TECHNICAL
They will focus on 2 things only :
1)C(most imp) : even it is a core elex company but they will not going to take you if you dont know C,
must learn dis topics viz ARRAY, POINTER, STRUCTURE, 4 storage class,from yashwant kanetkar and solve question from INDIABIX
2) PROJECTS: Projects on EMBEDDED SYSTEMS only, as many projects as u have greater is the chance of your selection and try to explain it in detail as much as u can.
Round: HR Interview
Experience: its just a formality round if they called you for this round that means u r selected ,they just wanted to know if u r really interested for this job? and u willing to join there company or not..
Skill Tips: 2 kind of people can crack interviews in core companies,1 having good POINTERS , projects,good technical knowledgesecond having low pointer but MANY PROJECTS+GOOD TECHNICAL KNOWLEDGE +CONFIDENCENo doubt i lie on second criteria. After 6th sem my CPI was 7.61 only , therefore i already knew that its gonna be tuff for me to be selected in core company but i have done 10+ projects in EMBEDDED SYSTEMS and INTERNSHIP too, so i found it not a big deal for me,always remember CONFIDENCE is the key..best of luck \m/
College Name: NIT RAIPUR
Prospect Engineering Works Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Mechanical Engg. Design Interview Questions
- Senior Design Engineer Interview Questions
- Electrical Design Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Piping Designer Interview Questions
- Auto CAD Designer Interview Questions
- Junior Design Engineer Interview Questions
- Hardware Design Engineer Interview Questions
- Show more
Prospect Engineering Works Design Engineer Interview Process
based on 1 interview
Interview experience
Design Engineer Interview Questions from Similar Companies
|
Accounts Manager
4
salaries
|  ₹5.4 L/yr - ₹6.8 L/yr |
|
Sales Coordinator
4
salaries
| ₹2.4 L/yr - ₹3 L/yr |
|
Senior Sales Executive
4
salaries
| ₹4.2 L/yr - ₹4.4 L/yr |
|
Account Assistant
4
salaries
| ₹1.1 L/yr - ₹2.8 L/yr |
|
Store Officer
4
salaries
| ₹1.5 L/yr - ₹2.6 L/yr |
Caparo Engineering India
Marelli
Enco Engineers Combine
Seoyon E-hwa Automotive
- Home >
- Interviews >
- Prospect Engineering Works Interview Questions >
- Prospect Engineering Works Design Engineer Interview Questions
