Property Solutions Facility Executive - Technical Interview Questions and Answers

Electrical and maintanance

Q1. Types of chiller
Ans. 
There are several types of chillers used in facilities, including air-cooled, water-cooled, absorption, and centrifugal chillers.
• Air-cooled chillers use air to remove heat from the refrigerant.

• Water-cooled chillers use water to remove heat from the refrigerant.

• Absorption chillers use a heat source, such as natural gas or steam, to drive the refrigeration cycle.

• Centrifugal chillers use centrifugal force to compress the
Answered by AI
Add your answer
Q2. DG, HVAC, UPS, PAC, BMS Documents Reports etc
Add your answer
Q3. What are the checks and frequency of DG
Ans. 
Regular checks and maintenance are essential for ensuring the proper functioning of DG (Diesel Generator) systems.
• Daily visual inspections for leaks, damages, and loose connections.

• Weekly checks for fuel levels, coolant levels, and battery condition.

• Monthly load testing to ensure the generator can handle the required load.

• Annual maintenance including oil and filter changes, spark plug replacement, and thorough cleaning...read more
Answered by AI
Add your answer
Q4. What is the UPS and Types of UPS
Ans. 
UPS stands for Uninterruptible Power Supply. There are three types of UPS: standby, line-interactive, and online.
• UPS stands for Uninterruptible Power Supply.

• UPS provides backup power to critical equipment during power outages or fluctuations.

• The three types of UPS are standby, line-interactive, and online.

• Standby UPS switches to battery power when the main power source fails.

• Line-interactive UPS regulates voltage fluct...read more
Answered by AI
Add your answer
Q5. What is the safety prications of before working working
Ans. 
Safety precautions before working
• Conduct a thorough risk assessment of the work area

• Ensure all necessary personal protective equipment (PPE) is available and worn

• Implement proper training and education on safety procedures

• Inspect and maintain tools and equipment regularly

• Establish emergency response plans and procedures

• Promote a culture of safety and encourage reporting of hazards or incidents
Answered by AI
Add your answer
Q6. What are the safety measurements of UPS
Ans. 
UPS (Uninterruptible Power Supply) safety measures include surge protection, battery backup, and automatic voltage regulation.
• Surge protection safeguards electronic devices from power surges or spikes.

• Battery backup provides temporary power during outages, preventing data loss or equipment damage.

• Automatic voltage regulation stabilizes voltage levels, protecting equipment from fluctuations.

• UPS systems may have audible ...read more
Answered by AI
Add your answer
Q7. How to maintan the Trasformer
Ans. 
To maintain a transformer, regular inspections, cleaning, and testing are necessary.
• Perform regular visual inspections to check for any signs of damage or leaks.

• Clean the transformer regularly to remove dust, dirt, and debris.

• Test the transformer's insulation resistance to ensure it is within acceptable limits.

• Monitor the transformer's temperature and oil levels regularly.

• Perform oil analysis to detect any potential is...read more
Answered by AI
Add your answer
Q8. What types of work permets is there
Add your answer
Q9. What is 52 week shadule
Ans. 
A 52-week schedule is a plan that outlines tasks, events, or milestones for each week of a year.
• A 52-week schedule helps in organizing and managing tasks throughout the year.

• It can be used in various industries such as project management, event planning, and manufacturing.

• Each week of the schedule may include specific goals, deadlines, or activities.

• Examples of 52-week schedules include construction project timelines, ...read more
Answered by AI
Add your answer
Q10. What is difference between chiller and PAC
Ans. 
A chiller is a refrigeration system used to cool large spaces, while a PAC (Portable Air Conditioner) is a compact unit used for localized cooling.
• Chillers are typically used in commercial or industrial settings to cool large areas such as office buildings or factories.

• PACs are smaller and more portable, designed to cool specific areas or rooms.

• Chillers use a refrigeration cycle to remove heat from the air or water, wh...read more
Answered by AI
Add your answer
Q11. Which type of fire Extingusher used in server room
Ans. 
A clean agent fire extinguisher is typically used in server rooms.
• Clean agent fire extinguishers are designed to suppress fires without leaving residue or damaging sensitive equipment.

• They use chemicals like halon, carbon dioxide, or clean agents like FM-200 or Novec 1230.

• These extinguishers are effective in suppressing fires involving electrical equipment and are safe for use in server rooms.

• It is important to consult...read more
Answered by AI
View 2 more answers
Q12. What is the 6S
Ans. 
6S is a workplace organization methodology that focuses on creating a clean, efficient, and safe environment.
• 6S stands for Sort, Set in Order, Shine, Standardize, Sustain, and Safety.

• It is derived from the 5S methodology and adds an additional focus on safety.

• Sort involves removing unnecessary items from the workplace.

• Set in Order involves organizing and arranging necessary items in a logical manner.

• Shine refers to cle...read more
Answered by AI
Add your answer

Topic for group discussion was GST. I spoke in favour of GST.

Q1. I was asked questions related to HVAC system, Data center management in terms of fire fighting, power supplies, temperature control, load etc.
Add your answer

Q1. I was asked question related to my family members, last job salaries, etc.
Add your answer

Q1. I was asked to visit the site and meet with client for final outcomes.
Add your answer

Q1. DG, Chiller, HVAC, Fire & Safety, EHS, Soft Services
View 1 more answer
Q2. Building Compliance, PPM, Energy Savings.
Add your answer
Q3. Overall Building operations & client dealing. Management of Ground Team
Add your answer

Q1. Ground Team Management
Add your answer
Q2. Dealing with odd situations
Add your answer

Q1. What are the benefits VESDA used in Server room?
Ans. 
VESDA in server rooms provides early detection of smoke and fire, ensuring quick response and minimizing downtime.
• Early detection of smoke and fire

• Quick response to potential threats

• Minimizes downtime and potential damage to equipment

• Continuous air sampling for early warning

• Integration with building management systems for centralized monitoring
Answered by AI
Add your answer
Q2. What is the Difference between RCCB & ELCB?
Ans. 
RCCB protects against earth faults while ELCB protects against earth leakage current.
• RCCB stands for Residual Current Circuit Breaker, detects earth faults and trips the circuit to prevent electric shock.

• ELCB stands for Earth Leakage Circuit Breaker, detects leakage current to earth and trips the circuit to prevent electric shock.

• RCCB is more sensitive and can detect lower leakage currents compared to ELCB.

• RCCB is comm...read more
Answered by AI
Add your answer
Q3. When D-Check happened in DG?
Ans. 
D-Check typically happens in aircraft maintenance every 6-10 years depending on the aircraft type and usage.
• D-Check stands for heavy maintenance check in aviation

• It typically happens every 6-10 years depending on the aircraft type and usage

• During D-Check, the aircraft is taken out of service for an extended period for thorough inspection and maintenance

• Examples of tasks during D-Check include structural inspections, co
Answered by AI
Add your answer
Q4. What is use of ATS?
Ans. 
An ATS (Automatic Transfer Switch) is a device used to automatically switch between primary and backup power sources in case of power failure.
• ATS ensures seamless transition between power sources

• It is commonly used in critical facilities like hospitals, data centers, and manufacturing plants

• Examples of ATS brands include Generac, Eaton, and Schneider Electric
Answered by AI
Add your answer
Q5. When will happend in BDV test on transformer?
Ans. 
BDV test on transformers is typically conducted during the manufacturing process or as part of routine maintenance to ensure insulation integrity.
• BDV test, or breakdown voltage test, is performed to assess the dielectric strength of transformer insulation.

• It is usually conducted during the manufacturing process to ensure quality control.

• Routine maintenance schedules may also include BDV testing to monitor insulation in...read more
Answered by AI
Add your answer

Q1. How Much package getting in present?
Add your answer
Q2. How much package you are expecting?
Ans. 
I am expecting a competitive salary package based on my qualifications and experience.
• I am looking for a salary package that is in line with industry standards for my level of expertise.

• I am open to negotiation based on the responsibilities and benefits offered by the position.

• I have done research on average salaries for similar roles in the region to have a realistic expectation.

• I am also considering other factors suc...read more
Answered by AI
Add your answer
Q3. Why you are changing the job?
Add your answer

Q1. Tell me about the the current job profile
Add your answer
Q2. How much experience do you have in this filed
Add your answer
Q3. How much hike would do you expect from our side
Add your answer

Q1. Tell me about the your self
Add your answer
Q2. Do you have know about job profile , can you explan it ?
Add your answer
Q3. What do you understand with the fire alarm system.
Ans. 
A fire alarm system is a network of devices designed to detect and alert people to the presence of a fire in a building.
• Fire alarm systems typically consist of smoke detectors, heat detectors, alarms, and control panels.

• When a fire is detected, the system activates alarms to alert occupants and authorities.

• Modern fire alarm systems may also include features such as remote monitoring and automatic notification of emerge...read more
Answered by AI
Add your answer
Q4. What is your current role in your current company
Add your answer
Q5. Why would you want change your job
Add your answer
Q6. What do understand with energy saving
Ans. 
Energy saving refers to the practice of reducing energy consumption in order to decrease energy costs and minimize environmental impact.
• Implementing energy-efficient lighting systems

• Upgrading to energy-efficient appliances

• Using programmable thermostats to regulate heating and cooling

• Sealing air leaks in buildings to prevent energy loss

• Utilizing renewable energy sources like solar panels
Answered by AI
Add your answer
Q7. What is diffrence between AMC & CAMC
Ans. 
AMC stands for Annual Maintenance Contract, while CAMC stands for Comprehensive Annual Maintenance Contract.
• AMC typically covers regular maintenance services for equipment or systems, while CAMC includes both preventive maintenance and repair services.

• CAMC is more comprehensive and usually covers a wider range of services compared to AMC.

• AMC may have limitations on the scope of services provided, while CAMC offers a mo...read more
Answered by AI
Add your answer

Numerous questions and answers

Topic relvant to current scenerio

Q1. About family and future
Add your answer
Q2. Are i am able to move around pan india
Ans. 
Yes, you are able to move around pan India.
• Yes, you can move around pan India as long as you have the necessary permissions and documents.

• Different states in India may have different regulations and requirements for movement, so it's important to check before traveling.

• Examples of documents you may need include valid identification, travel permits, and COVID-19 test reports.
Answered by AI
Add your answer

Q1. Regarding project work and internship
Add your answer
Q2. Basic fundamentals of engineering
Add your answer

Q1. Like a dg set, Transformer, Ups and HVAC system
Add your answer

How to manage floor, role and responsibility of executive, team handling

Q1. Why you want to join this organisation
Ans. 
I want to join this organization because of its strong reputation, opportunities for growth, and alignment with my career goals.
• The organization has a strong reputation in the industry, which would enhance my professional profile.

• There are ample opportunities for growth and advancement within the organization.

• The organization's values and mission align with my own career goals and aspirations.

• I am impressed by the orga...read more
Answered by AI
Add your answer