Upload Button Icon Add office photos

Filter interviews by

Power Mech Projects Electrical Engineer Interview Questions and Answers

Updated 11 Feb 2024

Power Mech Projects Electrical Engineer Interview Experiences

4 interviews found

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Generator protection Transformer protection Single line electrical diagram Switchyard single line diagram HT and LT breaker closing coil and tripping coil
Round 3 - Technical 

(1 Question)

  • Q1. Generator protection , transformer protection
  • Ans. Generator :- stator short circuit , earth fault ,rotor earth fault, low forword power , reverse power flow, low frequency,over frequency
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Increase your knowledge one day you will be definitely achieve your goals.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I was interviewed before Feb 2023.

Round 1 - Technical 

(1 Question)

  • Q1. What are the major parts in power transformer?
  • Ans. 

    The major parts in a power transformer include the core, windings, insulation, cooling system, and tap changer.

    • Core: Provides a path for magnetic flux and is usually made of laminated steel sheets.

    • Windings: Consist of primary and secondary coils that transfer electrical energy.

    • Insulation: Prevents electrical leakage and ensures safety.

    • Cooling System: Keeps the transformer within operating temperature limits, commonly u...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. What do you want to switch ?
  • Ans. 

    I want to switch electrical circuits and devices.

    • Switching electrical circuits to control the flow of electricity.

    • Switching electrical devices on or off.

    • Switching between different power sources.

    • Switching between different modes or settings of electrical equipment.

    • Switching between different electrical connections or configurations.

  • Answered by AI

Interview Questionnaire 

1 Question

  • Q1. Basic question of transformer, electrical machine, transmission

I applied via Campus Placement and was interviewed before Aug 2019. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Generally they shortlist ur CV on the required experience for the respective post and the interview is conducted by the client company.
  • Q2. Questions are asked on the basis of ur job profile and experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Be cool and interview is based on your technical experience

Power Mech Projects interview questions for designations

 Electrical Field Engineer

 (1)

 Junior Engineer Electrical

 (1)

 Diploma Electrical Engineer

 (1)

 Electrical Supervisor

 (1)

 Junior Electrical Maintenance Engineer

 (1)

 Senior HSE Engineer

 (1)

 Site Engineer

 (1)

 Civil Engineer

 (1)

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Oct 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Motor type, Pump lowering, ESR piping etc.
  • Q2. Solar Specification
Round 2 - HR 

(2 Questions)

  • Q1. Notice period is negotiable
  • Q2. 30%hike on current ctc

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep calm, to be honest if you know about whats they ask explain them if not then leave and say sorry.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Sep 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What is full name of RPM.
  • Ans. 

    RPM stands for Revolutions Per Minute.

    • RPM stands for Revolutions Per Minute

    • It is a unit of rotational speed

    • Commonly used in the context of engines, motors, and other rotating machinery

  • Answered by AI
  • Q2. How many type of Motor.
  • Ans. 

    There are various types of motors including DC motors, AC motors, stepper motors, and servo motors.

    • DC motors: used in applications where speed control is important, such as in electric vehicles.

    • AC motors: commonly used in household appliances and industrial machinery.

    • Stepper motors: used in applications requiring precise position control, like 3D printers.

    • Servo motors: used in robotics and automation for accurate contr

  • Answered by AI
Round 2 - Electrical 

(2 Questions)

  • Q1. What is Earthing.
  • Ans. 

    Earthing is the process of connecting electrical systems to the ground to prevent electric shock and protect equipment.

    • Earthing provides a path for fault currents to flow safely into the ground.

    • It helps in stabilizing voltage levels and protecting against lightning strikes.

    • Earthing is essential for safety in electrical systems to prevent electric shocks.

    • Examples of earthing systems include grounding rods, grounding pla

  • Answered by AI
  • Q2. Type of Insulator
  • Ans. 

    Insulators are materials that do not conduct electricity and are used to prevent the flow of current.

    • Insulators are materials with high resistivity, such as rubber, glass, porcelain, and plastic.

    • They are used to separate conductors in electrical systems to prevent short circuits.

    • Insulators are crucial for safety in electrical installations to avoid electric shocks and fires.

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Not Selected

I applied via Referral and was interviewed before Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Self introduction
  • Q2. Previous experience and languages
Round 3 - Technical 

(2 Questions)

  • Q1. What about synchronous motor principal
  • Ans. 

    Synchronous motors operate at a constant speed determined by the frequency of the power source.

    • Synchronous motors have a rotor that rotates at the same speed as the rotating magnetic field in the stator.

    • They are used in applications where constant speed is required, such as in industrial processes or power generation.

    • Synchronous motors are more efficient than induction motors at higher loads.

    • They require a separate DC ...

  • Answered by AI
  • Q2. Difference between induction and synchronous motor
  • Ans. 

    Induction motors rely on induction to produce torque, while synchronous motors require a magnetic field to rotate at a constant speed.

    • Induction motors do not require any external connections to the rotor, while synchronous motors need a DC power source to create the magnetic field.

    • Induction motors are self-starting, while synchronous motors require external means to start.

    • Induction motors are more commonly used in indu...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Mar 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Group Discussion 

Normal introduction and interview

Round 3 - Technical 

(5 Questions)

  • Q1. Type of electrical motor
  • Ans. 

    There are various types of electrical motors including AC motors, DC motors, synchronous motors, and induction motors.

    • AC motors: commonly used in household appliances and industrial applications

    • DC motors: used in applications where speed control is important, such as in electric vehicles

    • Synchronous motors: used in applications where precise speed control is required, such as in clocks and timers

    • Induction motors: widely...

  • Answered by AI
  • Q2. 3 phase induction motor starter
  • Q3. Protection of transformer
  • Ans. 

    Protection of transformer involves measures to prevent damage from overcurrent, overvoltage, and overheating.

    • Use overcurrent protection devices such as fuses and circuit breakers to prevent damage from excessive current flow.

    • Install overvoltage protection devices like surge arresters to safeguard against voltage spikes.

    • Implement temperature monitoring systems to prevent overheating, such as thermal sensors and cooling ...

  • Answered by AI
  • Q4. ACB VCB maintenance
  • Q5. Star delta connection

Interview Preparation Tips

Interview preparation tips for other job seekers - Electrical basic knowledge
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is Full form DOL starter
  • Ans. 

    DOL starter stands for Direct-On-Line starter, used to start motors by directly connecting them to the power supply.

    • DOL starter is the simplest and most common type of motor starter.

    • It directly connects the motor to the power supply without any intermediate starting method.

    • It provides full voltage to the motor during starting, which can cause high inrush current.

    • DOL starters are suitable for small to medium-sized motor...

  • Answered by AI
  • Q2. What is APFC PANEL
  • Ans. 

    APFC PANEL stands for Automatic Power Factor Correction Panel, used to maintain power factor in electrical systems.

    • APFC PANEL automatically monitors and corrects the power factor of electrical systems.

    • It helps in reducing electricity bills by maintaining a high power factor.

    • APFC PANELs are commonly used in industries and commercial buildings.

    • They consist of capacitors that are switched on and off based on the load requ...

  • Answered by AI
  • Q3. Star dalta conection
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. As per company policy requirement condition
Round 3 - HR 

(1 Question)

  • Q1. As per company policy requirement

Power Mech Projects Interview FAQs

How many rounds are there in Power Mech Projects Electrical Engineer interview?
Power Mech Projects interview process usually has 2-3 rounds. The most common rounds in the Power Mech Projects interview process are Technical, Resume Shortlist and HR.
How to prepare for Power Mech Projects Electrical Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Power Mech Projects. The most common topics and skills that interviewers at Power Mech Projects expect are Electrical Engineering, Electricals, Erection Commissioning, Execution and Planning.
What are the top questions asked in Power Mech Projects Electrical Engineer interview?

Some of the top questions asked at the Power Mech Projects Electrical Engineer interview -

  1. What are the major parts in power transform...read more
  2. What do you want to switc...read more
  3. Generator protection Transformer protection Single line electrical diagram Swit...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Power Mech Projects interview
Campus Placement
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.
Power Mech Projects Electrical Engineer Salary
based on 228 salaries
₹1.7 L/yr - ₹7 L/yr
10% less than the average Electrical Engineer Salary in India
View more details

Power Mech Projects Electrical Engineer Reviews and Ratings

based on 46 reviews

3.9/5

Rating in categories

3.4

Skill development

3.7

Work-Life balance

3.0

Salary & Benefits

3.6

Job Security

3.3

Company culture

3.2

Promotions/Appraisal

3.4

Work Satisfaction

Explore 46 Reviews and Ratings
Senior Engineer
542 salaries
unlock blur

₹3 L/yr - ₹8.1 L/yr

Assistant Manager
375 salaries
unlock blur

₹3.3 L/yr - ₹10 L/yr

Engineer
247 salaries
unlock blur

₹2 L/yr - ₹6 L/yr

Electrical Engineer
228 salaries
unlock blur

₹1.7 L/yr - ₹7 L/yr

Mechanical Engineer
217 salaries
unlock blur

₹2 L/yr - ₹6.3 L/yr

Explore more salaries
Compare Power Mech Projects with

Thermax Limited

4.2
Compare

BGR Energy Systems

3.7
Compare

Larsen & Toubro Limited

4.0
Compare

Kalpataru Projects International

4.2
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview