Premium Employer

i

This company page is being actively managed by Pidilite Industries Team. If you also belong to the team, you can get access from here

Pidilite Industries Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Pidilite Industries Junior Engineer Interview Questions and Answers

Updated 3 Aug 2022

Pidilite Industries Junior Engineer Interview Experiences

1 interview found

I applied via Walk-in and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Different between single mechanical seal and double mechanical seal
  • Ans. 

    A single mechanical seal consists of one set of sealing surfaces, while a double mechanical seal consists of two sets of sealing surfaces.

    • Single mechanical seals are commonly used in applications with low to moderate pressure and temperature.

    • Double mechanical seals are used in applications with high pressure and temperature to provide an extra layer of protection.

    • Single mechanical seals are simpler and easier to instal...

  • Answered by AI
  • Q2. Type of gear box in used ssr rector
  • Ans. 

    The type of gearbox used in SSR reactors is typically a helical gearbox.

    • SSR reactors commonly use helical gearboxes for their efficient power transmission.

    • Helical gearboxes have high load-carrying capacity and smooth operation.

    • They are suitable for applications requiring high torque and low noise levels.

    • Examples of helical gearboxes used in SSR reactors include inline helical gearboxes and parallel shaft helical gearbo

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Plz consult the resume bet job and best position

Interview questions from similar companies

I applied via Walk-in and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. MSDS,WORK TO PERMIT, PREVIOUS COMPANY EXPERIENCE BASE TECHNICAL,
Round 2 - HR 

(1 Question)

  • Q1. Family background, education background, salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - MSDS, permit system, technical knowledge about previous experience.

Senior Engineer Interview Questions & Answers

SRF user image Veeravalli Lakshmiprasad

posted on 17 Oct 2019

I applied via Naukri.com and was interviewed in Sep 2019. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. R22 production
  • Q2. HCl scrubbing,Neutralisation column
  • Q3. Distillation columns,compressors and their trouble shooting

Interview Preparation Tips

Interview preparation tips for other job seekers - On Aug 17,2019..I attended an interview for the post of Senior Production Engineer in SRF,Dahej,Gujarat.I am fortunate enough that I have got very similar process experience that what SRF is manufacturing.Being a professional chemical engineer for 7 years in Hindustan Fluorocarbons Ltd,I answered almost all the questions for what the interview panel had asked me.Infact I prepared for more Monomer plant questions but they confined to R22 plant only.Then later asked about my family background and raised concerns about my relocation to gujarat for the reason being that my wife works in Infosys,Hyderabad.My wife has the facility to work from home hence I assured them of my relocation to Gujarat if given the opportunity.But HR Divya Chauhan has put it ON HOLD for the same reason.Thanks for their wonderful hospitality and flight charges reimbursement.Definitely one day I will join in SRF and explore myself to the better challenges.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before May 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. How much experience in this field
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Oct 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be truthful in your resume. It is very easy to catch false or lies during the interview by asking basic questions.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. All type of technical questions
  • Q2. Pump, condenser, Disttilation
Round 3 - Technical 

(1 Question)

  • Q1. Brief knowledge of pump HE, coloum DCS etc
Round 4 - HR 

(1 Question)

  • Q1. Its easy no worries
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Walk-in and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Tell me about yourself.

Junior Engineer Interview Questions & Answers

SRF user image Sudhakar Kumar

posted on 7 May 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is bubble point
  • Ans. 

    Bubble point is the pressure at which the first bubble of vapor is formed in a liquid-vapor mixture.

    • Bubble point is the pressure at which a liquid-vapor mixture starts to boil.

    • It is a critical parameter in the design and operation of distillation columns.

    • Bubble point can be determined experimentally using a bubble point tester.

  • Answered by AI
  • Q2. What is molarty
  • Ans. 

    Molarity is a measure of the concentration of a solute in a solution.

    • Molarity is defined as the number of moles of solute per liter of solution.

    • It is represented by the formula M = moles of solute / liters of solution.

    • For example, a solution containing 0.5 moles of NaCl in 1 liter of water has a molarity of 0.5 M.

  • Answered by AI
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Roles and responsibilities
  • Q2. What is LEL ,UEL , 5S hazardous chemical handling, vaccum system, failure trouble shooting ,steam distillation etc
  • Ans. 

    LEL stands for Lower Explosive Limit, UEL stands for Upper Explosive Limit. 5S is a method for organizing and maintaining a clean and safe workplace. Vacuum system is a system that uses suction to remove substances. Failure troubleshooting is the process of identifying and resolving issues. Steam distillation is a technique used to separate components of a mixture based on their boiling points.

    • LEL is the lowest concent...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Must join If u have mentally to work in DAHEJ location
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Fgghj rht hjty tyjt g4h 5h5 4th5 tjt eyhry rht

Round 3 - Technical 

(2 Questions)

  • Q1. Tell me something about you. What is design? What is your current Job Profile? How many years of experience do you have?
  • Q2. What is your current job Profile? What is your Current CTC?

Interview Preparation Tips

Interview preparation tips for other job seekers - Go And study hard to place in MNC like this. Best Of Luck
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Dcs field instrumentation
  • Q2. What is dcs and working
  • Ans. 

    DCS stands for Distributed Control System. It is a control system used to control and monitor industrial processes.

    • DCS is used in industries to control processes such as manufacturing, power generation, and oil refining.

    • It consists of multiple control units distributed throughout a plant or facility.

    • DCS allows for centralized monitoring and control of various processes, improving efficiency and safety.

    • Examples of DCS i...

  • Answered by AI
Contribute & help others!
anonymous
You can choose to be anonymous

Pidilite Industries Interview FAQs

How many rounds are there in Pidilite Industries Junior Engineer interview?
Pidilite Industries interview process usually has 2 rounds. The most common rounds in the Pidilite Industries interview process are Resume Shortlist and Technical.
What are the top questions asked in Pidilite Industries Junior Engineer interview?

Some of the top questions asked at the Pidilite Industries Junior Engineer interview -

  1. Different between single mechanical seal and double mechanical s...read more
  2. Type of gear box in used ssr rec...read more

Recently Viewed

INTERVIEWS

Alfa Laval

No Interviews

SALARIES

Chambal Fertilisers And Chemicals

LIST OF COMPANIES

Chambal Fertilisers And Chemicals

Overview

INTERVIEWS

TechnipFMC

No Interviews

INTERVIEWS

Schaeffler India

No Interviews

INTERVIEWS

Gujarat Fluorochemicals

No Interviews

INTERVIEWS

Coromandel International

No Interviews

INTERVIEWS

Vinati Organics

No Interviews

INTERVIEWS

TCS

No Interviews

SALARIES

Chambal Fertilisers And Chemicals

Tell us how to improve this page.

Join Pidilite Industries When you grow, so do we
Pidilite Industries Junior Engineer Salary
based on 6 salaries
₹2.2 L/yr - ₹4.5 L/yr
6% less than the average Junior Engineer Salary in India
View more details

Pidilite Industries Junior Engineer Reviews and Ratings

based on 2 reviews

4.9/5

Rating in categories

4.9

Skill development

4.9

Work-life balance

4.9

Salary

4.9

Job security

4.9

Company culture

4.9

Promotions

4.9

Work satisfaction

Explore 2 Reviews and Ratings
Business Development Executive
551 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Territory Sales Incharge
465 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Area Sales Manager
398 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Branch Manager
224 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
223 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Pidilite Industries with

Asian Paints

4.0
Compare

Berger Paints

3.7
Compare

Kansai Nerolac Paints

3.8
Compare

3M

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent