Upload Button Icon Add office photos

Filter interviews by

PI Industries Graduate Trainee Interview Questions and Answers

Updated 21 Aug 2024

PI Industries Graduate Trainee Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via campus placement at LD College of Engineering, Ahmedabad and was interviewed before Aug 2023. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. What is the usage of current transformer and how it is used?
  • Ans. 

    Current transformers are used to measure alternating current (AC) in high voltage circuits by stepping down the current to a lower value.

    • Used to measure high currents in power systems

    • Step down current to a safe level for measurement

    • Provide isolation between high voltage circuits and measuring instruments

    • Commonly used in energy meters, protective relays, and power quality monitoring systems

  • Answered by AI
  • Q2. Induction motor working and it's speed regulation
  • Ans. 

    Induction motor works on the principle of electromagnetic induction to produce rotating magnetic field. Speed regulation is achieved by varying the supply frequency or voltage.

    • Induction motor operates on the principle of electromagnetic induction

    • It consists of a stator and a rotor

    • Speed regulation can be achieved by varying the supply frequency or voltage

    • Examples of speed control methods include VFD (Variable Frequency

  • Answered by AI

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at Vishwakarma Institute of Technology, Pune and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Offline Objective and Subjective Test.
100 Marks
50 Mark Objective
50 Mark Subjective

Round 2 - One-on-one 

(1 Question)

  • Q1. 1) NPSH 2) Cavitation 3) Issues with Shell and Tube Heat Exchanger and its Solutions. 4) Cooling Tower Concept and Working Principle. 5) Questions based on resume. 6) Questions on Distillation Column.
  • Ans. 

    The interview questions cover topics like NPSH, cavitation, shell and tube heat exchangers, cooling towers, resume, and distillation columns.

    • NPSH stands for Net Positive Suction Head and is a measure of the pressure available at the suction port of a pump to prevent cavitation.

    • Cavitation is the formation of vapor bubbles in a liquid due to rapid changes in pressure, which can damage pump components.

    • Shell and tube heat ...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. 1) CV/Resume based questions. 2) Background. 3) Personal Response type Questions.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Automation Vs. Manual work at industries

Round 2 - One-on-one 

(1 Question)

  • Q1. Baiscally about projects, management about work

Interview Preparation Tips

Interview preparation tips for other job seekers - Be thorough with ur resume.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at National Institute of Technology,(NIT), Agartala and was interviewed in Apr 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Domain based questions and basic aptitude question

Round 2 - Technical 

(5 Questions)

  • Q1. About distillation column, basic questions ,cooling tower concept.
  • Q2. Difference between CSTR and PFR, Pumps ,Heat Exchanger.
  • Ans. 

    CSTR and PFR are types of reactors, pumps are used to move fluids, heat exchangers transfer heat between fluids.

    • CSTR (Continuous Stirred Tank Reactor) has a constant volume and operates under steady-state conditions.

    • PFR (Plug Flow Reactor) has a varying volume and operates under unsteady-state conditions.

    • Pumps are mechanical devices used to move fluids from one place to another, like centrifugal pumps or positive displ...

  • Answered by AI
  • Q3. What is cracking
  • Ans. 

    Cracking is a process in which complex hydrocarbon molecules are broken down into simpler molecules.

    • Cracking is a refining process used to convert large hydrocarbon molecules into smaller, more valuable ones.

    • It is done by breaking the carbon-carbon bonds in the molecules.

    • Examples include catalytic cracking and steam cracking.

  • Answered by AI
  • Q4. What is Reforming
  • Ans. 

    Reforming is a process used in the petroleum industry to convert low-octane naphtha into high-octane gasoline.

    • Reforming involves rearranging the molecular structure of hydrocarbons to increase their octane rating.

    • It is typically done using a catalyst at high temperatures and pressures.

    • The process can also produce hydrogen gas as a byproduct.

    • Reforming is an important step in the production of gasoline and other fuels in...

  • Answered by AI
  • Q5. What is range and approach of cooling tower
  • Ans. 

    The range of a cooling tower refers to the maximum distance at which it can effectively cool air, while the approach is the temperature difference between the cooled water and the entering air.

    • Range of a cooling tower is typically around 5-20 degrees Fahrenheit

    • Approach of a cooling tower is usually around 8-15 degrees Fahrenheit

    • The range and approach of a cooling tower can vary based on factors such as design, size, an

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Tata Chemicals Graduate Engineer Trainee (Get) interview:
  • Distillation Column
  • Heat Exchangers
  • Pumps
  • Cooling Tower
Interview preparation tips for other job seekers - Have Patience
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jan 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Introduce yourself and Also tell about your Family background
  • Q2. What are your hobbies you pursue apart from academics
  • Q3. Tell me something about your Internship experience and what all have you learnt there
Round 3 - Aptitude Test 

1. Quantitative aptitude
2. Verbal and Reasoning Test

Round 4 - Technical 

(5 Questions)

  • Q1. Tell me about yourself and Family background
  • Q2. Tell me what all have you learnt in academics which help you in internship
  • Q3. Tell me about yourself start from your graduation and also about your family
  • Q4. What do you understand from the word Work life balance?
  • Ans. 

    Work life balance refers to maintaining a healthy equilibrium between one's professional responsibilities and personal life.

    • Work life balance involves prioritizing tasks and setting boundaries between work and personal life.

    • It is important to manage time effectively to avoid burnout and maintain overall well-being.

    • Examples of achieving work life balance include setting specific work hours, taking regular breaks, and en...

  • Answered by AI
  • Q5. Tell me about your experience in internship?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and well versed with your resume, because Interview tend to revolve around those.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Basic knowledge of chemicals 

(4 Questions)

  • Q1. Some basic questions about chemical
  • Q2. Modes of heat transfer
  • Ans. 

    Modes of heat transfer include conduction, convection, and radiation.

    • Conduction: Heat transfer through direct contact between particles or objects.

    • Convection: Heat transfer through the movement of fluids or gases.

    • Radiation: Heat transfer through electromagnetic waves.

    • Examples: Cooking on a stove (conduction), heating a room with a radiator (convection), feeling the warmth of the sun (radiation).

  • Answered by AI
  • Q3. Pumps and valves and fluid mechanics
  • Q4. Mass transfer operation
Round 2 - Technical 

(1 Question)

  • Q1. Some basic knowledge about chemical engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing much... just do apply through MHRD and make sure to search NFL.after that uh a
Can apply for an apprentice program

I applied via campus placement at Dharmsinh Desai University, Gujarat and was interviewed in Aug 2022. There were 3 interview rounds.

Round 1 - Aptitude Test 

Very easy question but time is not more.

Round 2 - Case Study 

1st Introduction.
2nd Project
3rd Favourite Subject
4th Technical Questions
5th General knowledge
6th Hr round

Round 3 - Case Study 

I am selected in 1st round ,so 2nd time Interview for Technical + Hr

Interview Preparation Tips

Topics to prepare for Deepak Nitrite Graduate Engineer Trainee (Get) interview:
  • PTFL + PLC + DCS + CONTROL SYS
Interview preparation tips for other job seekers - Contact me - XXXXX if you have any queries.

I applied via Campus Placement and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Being a mechanical Engineer you should aware about the basic of fluid mechanics Heat transfer and little bit strength of materials subjects was more weightage in the technical interview.
  • Q2. How to design equipment?
  • Ans. 

    Equipment design involves identifying user needs, creating prototypes, testing, and refining the design.

    • Identify user needs and requirements

    • Create prototypes and test them thoroughly

    • Refine the design based on feedback and testing

    • Consider safety, ergonomics, and usability

    • Use appropriate materials and manufacturing processes

    • Ensure compliance with relevant regulations and standards

  • Answered by AI
  • Q3. What was centrifugal pump and difference between pump and compressor?
  • Ans. 

    A centrifugal pump is a mechanical device used to transport fluids by converting rotational kinetic energy to hydrodynamic energy.

    • Centrifugal pumps are commonly used in industries such as oil and gas, chemical, and water treatment.

    • They work by using an impeller to create a low-pressure area at the center of the pump, which draws in fluid and then expels it at high pressure through the outlet.

    • Pumps are used to transport...

  • Answered by AI
  • Q4. What was NPSH? Types of pumps..
  • Ans. 

    NPSH stands for Net Positive Suction Head. It is a measure of the pressure available at the suction side of a pump to prevent cavitation.

    • NPSH is important in pump selection and operation.

    • It is the difference between the total suction head and the vapor pressure of the pumped fluid.

    • Insufficient NPSH can lead to cavitation, which can damage the pump and reduce its efficiency.

    • Different types of pumps have different NPSH r...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare the HR questions as well as technical questions related to SOM thermo and Heat transfer fluid mechanics and machinery are important subject to interview point of view.

I applied via Campus Placement and was interviewed before Nov 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. General basic departmental ques.
  • Q2. If you are chemical engineer...grap basic knowledge of heat..fluid and mass

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on general interview ques from Google like about pump,valve,heat transfer etc

I applied via Campus Placement and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Aptitude Test 

Basic quantitative aptitude

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic knowledge of chemical engineering

PI Industries Interview FAQs

How many rounds are there in PI Industries Graduate Trainee interview?
PI Industries interview process usually has 1 rounds. The most common rounds in the PI Industries interview process are One-on-one Round.
What are the top questions asked in PI Industries Graduate Trainee interview?

Some of the top questions asked at the PI Industries Graduate Trainee interview -

  1. What is the usage of current transformer and how it is us...read more
  2. Induction motor working and it's speed regulat...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 PI Industries interview
Campus Placement
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

Asian Paints Interview Questions
4.0
 • 613 Interviews
Aarti Industries Interview Questions
4.2
 • 274 Interviews
Berger Paints Interview Questions
3.7
 • 250 Interviews
Grasim Industries Interview Questions
4.0
 • 194 Interviews
UPL Interview Questions
4.2
 • 166 Interviews
Uflex Interview Questions
3.7
 • 102 Interviews
DCM Shriram Interview Questions
4.2
 • 79 Interviews
Atul Interview Questions
3.9
 • 78 Interviews
View all

PI Industries Graduate Trainee Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

5.0

Skill development

4.0

Work-Life balance

4.0

Salary & Benefits

4.0

Job Security

3.0

Company culture

4.0

Promotions/Appraisal

4.0

Work Satisfaction

Explore 1 Review and Rating
Production Supervisor
681 salaries
unlock blur

₹2.4 L/yr - ₹9.6 L/yr

Executive
249 salaries
unlock blur

₹3 L/yr - ₹10.8 L/yr

Supervisor
235 salaries
unlock blur

₹2.2 L/yr - ₹8.4 L/yr

Research Scientist
186 salaries
unlock blur

₹4 L/yr - ₹10.3 L/yr

Senior Executive
147 salaries
unlock blur

₹6.7 L/yr - ₹14.6 L/yr

Explore more salaries
Compare PI Industries with

Bayer Crop Science Vegetable Seeds

4.4
Compare

UPL

4.1
Compare

Syngenta

4.3
Compare

Coromandel International

4.1
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview