AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Nasser S. Al Hajri Corporation Scaffolding Supervisor Interview Questions and Answers
6 Interview questions
The number of degree ladder fixed depends on the specific requirements of the scaffolding project.
The number of degree ladder fixed can vary depending on the height and configuration of the scaffolding.
It is important to follow safety regulations and guidelines when determining the number of degree ladder fixed.
The scaffolding supervisor should assess the project requirements and consult with engineers or safety e...
The noted point refers to a specific point or detail that has been highlighted or emphasized.
The noted point is usually mentioned or marked for easy reference.
It can be a key piece of information or a significant aspect that requires attention.
For example, in a construction project, the noted point could be a safety guideline that must be strictly followed.
In a meeting, the noted point could be a critical decision...
The number of degree bracings depends on the specific scaffolding design and requirements.
The number of degree bracings can vary based on the height and width of the scaffolding structure.
Degree bracings are used to provide stability and support to the scaffolding system.
The specific number of degree bracings needed will be determined by a qualified scaffolding engineer or supervisor.
Examples of degree bracings in...
To increase the capacity of hanging scaffolding, additional support systems can be used.
Use outriggers or counterweights to provide stability and balance.
Install diagonal braces to enhance the structural integrity.
Ensure proper anchoring and tie-backs to prevent movement.
Use stronger and thicker materials for the scaffold components.
Regularly inspect and maintain the scaffolding to identify any weaknesses or defec...
There are several types of scaffolding used in construction projects.
Supported scaffolding: Most common type, supported by poles, frames, or outriggers.
Suspended scaffolding: Hangs from the roof or other overhead structure.
Rolling scaffolding: Equipped with wheels for easy movement.
Cantilever scaffolding: Supported by a series of needles and cantilevers.
Trestle scaffolding: Supported by movable tripods or ladders.
...
Scaffolding in construction work refers to a temporary structure used to support workers and materials during building or maintenance projects.
Scaffolding provides a safe and stable platform for workers to perform tasks at heights.
It is typically made of metal pipes or tubes and is erected around the perimeter of a building or structure.
Scaffolding allows workers to access hard-to-reach areas and facilitates the m...
Nasser S. Al Hajri Corporation Scaffolding Supervisor Interview Experiences
2 interviews found
Anonymous
Selected
I applied via Walk-in and was interviewed before Jan 2022. There were 2 interview rounds.
(5 Questions)
- Q1. What is the noted point
- Ans.
The noted point refers to a specific point or detail that has been highlighted or emphasized.
The noted point is usually mentioned or marked for easy reference.
It can be a key piece of information or a significant aspect that requires attention.
For example, in a construction project, the noted point could be a safety guideline that must be strictly followed.
In a meeting, the noted point could be a critical decision or a...
- Q2. Hanging scaffolding how make the work more capacity
- Ans.
To increase the capacity of hanging scaffolding, additional support systems can be used.
Use outriggers or counterweights to provide stability and balance.
Install diagonal braces to enhance the structural integrity.
Ensure proper anchoring and tie-backs to prevent movement.
Use stronger and thicker materials for the scaffold components.
Regularly inspect and maintain the scaffolding to identify any weaknesses or defects.
- Q3. How many years experience in GCC and which of the client I you working.
- Q4. How many degree ladder fixed
- Ans.
The number of degree ladder fixed depends on the specific requirements of the scaffolding project.
The number of degree ladder fixed can vary depending on the height and configuration of the scaffolding.
It is important to follow safety regulations and guidelines when determining the number of degree ladder fixed.
The scaffolding supervisor should assess the project requirements and consult with engineers or safety expert...
- Q5. How many degree bracings
- Ans.
The number of degree bracings depends on the specific scaffolding design and requirements.
The number of degree bracings can vary based on the height and width of the scaffolding structure.
Degree bracings are used to provide stability and support to the scaffolding system.
The specific number of degree bracings needed will be determined by a qualified scaffolding engineer or supervisor.
Examples of degree bracings include...
Interview Preparation Tips
I applied via Recruitment Consulltant and was interviewed before Jul 2021. There was 1 interview round.
(2 Questions)
- Q1. How many type of scaffolding 's?
- Ans.
There are several types of scaffolding used in construction projects.
Supported scaffolding: Most common type, supported by poles, frames, or outriggers.
Suspended scaffolding: Hangs from the roof or other overhead structure.
Rolling scaffolding: Equipped with wheels for easy movement.
Cantilever scaffolding: Supported by a series of needles and cantilevers.
Trestle scaffolding: Supported by movable tripods or ladders.
Steel...
- Q2. What is scaffolding in construction work?
- Ans.
Scaffolding in construction work refers to a temporary structure used to support workers and materials during building or maintenance projects.
Scaffolding provides a safe and stable platform for workers to perform tasks at heights.
It is typically made of metal pipes or tubes and is erected around the perimeter of a building or structure.
Scaffolding allows workers to access hard-to-reach areas and facilitates the moveme...
Interview Preparation Tips
- Work knowledge
- Suggestions for the company.
- Why Do You Want This Job?
Know yourself and what you want.
Apply Even If You're Not a 100 Percent Match.
Top trending discussions
Interview questions from similar companies
Selected
I applied via LinkedIn and was interviewed in Mar 2024. There was 1 interview round.
(2 Questions)
- Q1. What are Hazards of Work at Height ?
- Ans.
Hazards of work at height include falls, falling objects, unstable surfaces, and weather conditions.
Falls from height can result in serious injuries or fatalities
Objects falling from height can cause harm to workers below
Unstable surfaces such as ladders or scaffolding can lead to slips or falls
Weather conditions like wind or rain can increase the risk of accidents
Improper use of safety equipment can also contribute to...
- Q2. What is Hazard Control Hierarchy ?
- Ans.
Hazard Control Hierarchy is a system used to prioritize and implement control measures to reduce or eliminate workplace hazards.
Hierarchy of controls ranks control measures from most effective to least effective: Elimination, Substitution, Engineering Controls, Administrative Controls, Personal Protective Equipment (PPE)
The goal is to eliminate or reduce hazards at the source rather than relying on PPE
Example: Instead ...
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. Hard core techanical
I applied via Referral and was interviewed before Jan 2021. There were 5 interview rounds.
Interview Questionnaire
10 Questions
- Q1. What do you want to do in 5 years
- Q2. What is glass
- Ans.
Glass is a solid, transparent material made by heating a mixture of silica and other materials.
Glass is a non-crystalline, amorphous solid
It is made by heating a mixture of silica, soda ash, and lime
It can be molded into various shapes and sizes
It is used in windows, mirrors, lenses, and containers
Different types of glass include tempered, laminated, and stained glass
- Q3. What is graphene
- Ans.
Graphene is a thin layer of pure carbon arranged in a hexagonal lattice.
It is the thinnest material known to man
It is a good conductor of electricity and heat
It is incredibly strong and flexible
It has potential applications in electronics, energy, and medicine
- Q4. What is your expectations
- Q5. What do you want to do in 5 years
- Ans.
In five years, I envision myself leading innovative projects, mentoring junior engineers, and contributing to strategic decisions.
Leadership Role: I aim to take on a leadership position where I can guide teams in developing cutting-edge technologies, similar to how I led a project that improved system efficiency by 30%.
Mentorship: I want to mentor junior engineers, sharing knowledge and best practices, much like how I ...
- Q6. What is glass
- Ans.
Glass is a solid, transparent material made by heating a mixture of silica and other materials.
Glass is an amorphous solid, meaning it has no long-range order in its atomic structure.
It is commonly used in windows, mirrors, lenses, and containers.
Glass can be colored or made into different shapes by adding various chemicals or using different manufacturing techniques.
It can also be tempered or laminated for increased s...
- Q7. What is your expectations
- Ans.
As a Senior Engineer, I expect growth opportunities, collaborative teamwork, and a focus on innovative problem-solving.
Career Development: I look for opportunities to enhance my skills through training and mentorship, such as attending workshops or conferences.
Collaborative Environment: I value working in teams where knowledge sharing is encouraged, like participating in code reviews or pair programming.
Innovative Proj...
- Q8. What do you want to do in 5 years
- Ans.
In five years, I aim to lead innovative projects, mentor junior engineers, and contribute to strategic technical decisions.
Leadership Role: I aspire to take on a leadership position where I can guide teams in developing cutting-edge solutions, similar to how I led a project that improved system efficiency by 30%.
Mentorship: I want to mentor junior engineers, sharing knowledge and best practices, much like how I was men...
- Q9. What is glass
- Ans.
Glass is a solid, transparent material made by heating a mixture of silica and other materials.
Glass is a non-crystalline, amorphous solid
It is made by heating a mixture of silica, soda ash, and lime
It can be molded into various shapes and sizes
It is used in windows, mirrors, lenses, and containers
Different types of glass include tempered, laminated, and stained glass
- Q10. What is your expectations
- Ans.
As a Senior Engineer, I expect growth opportunities, collaboration, and a culture of innovation to drive impactful projects.
Career Development: I look for opportunities to enhance my skills through training and mentorship, such as attending industry conferences.
Collaborative Environment: I value teamwork and open communication, where ideas can be shared freely, like in regular brainstorming sessions.
Impactful Projects:...
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.
(1 Question)
- Q1. What is minimum gap between two structures for seismic point of view
- Ans.
Minimum gap between two structures for seismic point of view is typically around 1.5 times the height of the taller structure.
Minimum gap is usually 1.5 times the height of the taller structure to reduce seismic interaction.
This gap helps prevent collision or structural damage during an earthquake.
Building codes and regulations may specify minimum gaps for seismic safety.
Example: If one building is 100 feet tall, the m...
Interview Preparation Tips
Selected
I applied via LinkedIn and was interviewed before Aug 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Describe Projects handled
- Ans.
Managed various projects including software development, system integration, and process improvement.
Led a team in developing a new software application for streamlining customer data management
Implemented system integration solutions to improve communication between different departments
Executed process improvement initiatives to increase efficiency and reduce costs
Collaborated with cross-functional teams to ensure pr...
- Q2. Expectations from career
- Ans.
Continuous learning, growth, challenging projects, leadership opportunities, work-life balance
Continuous learning and skill development through training and certifications
Opportunities for career growth and advancement
Challenging projects that allow for problem-solving and innovation
Leadership opportunities to mentor and guide junior team members
Maintaining a healthy work-life balance to prevent burnout
(2 Questions)
- Q1. Current compensation
- Q2. Variable compensation
Interview Preparation Tips
I applied via Company Website and was interviewed in Jun 2023. There were 3 interview rounds.
(2 Questions)
- Q1. Primavera, cost control
- Q2. About Employee engagement, training
(1 Question)
- Q1. Levels of P6, Float, Critical activities
- Ans.
P6 is a project management software used for scheduling, Float is the amount of time an activity can be delayed without delaying the project, Critical activities are tasks that must be completed on time to prevent project delays.
P6 is a software used for project scheduling and management
Float is the amount of time an activity can be delayed without affecting the project deadline
Critical activities are tasks that have z...
I appeared for an interview in Apr 2024.
(2 Questions)
- Q1. Control Valve sizing
- Q2. Flowmeter selection
(2 Questions)
- Q1. Reason for shifting
- Ans.
I shifted to pursue new opportunities for growth and development in my career.
Seeking new challenges and responsibilities
Exploring different industries or technologies
Relocation for personal reasons or family commitments
- Q2. Expected salary
- Ans.
I expect a competitive salary that reflects my experience and the value I bring to the team, ideally in the range of $X to $Y.
Research industry standards: For example, according to Glassdoor, the average salary for a Senior Engineer in my area is $X.
Consider my experience: With over Y years in the field, I have successfully led projects that increased efficiency by Z%.
Factor in company size and location: Larger compani...
(2 Questions)
- Q1. Explain about current work?
- Ans.
I lead a team in developing scalable software solutions, focusing on system architecture and performance optimization.
Oversee the design and implementation of microservices architecture to enhance system scalability.
Collaborate with cross-functional teams to gather requirements and ensure alignment with business goals.
Utilize cloud technologies like AWS to deploy applications, improving reliability and reducing costs.
I...
- Q2. Question from the written test ?
Interview Preparation Tips
Nasser S. Al Hajri Corporation Interview FAQs
Tell us how to improve this page.
Nasser S. Al Hajri Corporation Interviews By Designations
- Nasser S. Al Hajri Corporation Safety Officer Interview Questions
- Nasser S. Al Hajri Corporation Piping Engineer Interview Questions
- Nasser S. Al Hajri Corporation Scaffolding Supervisor Interview Questions
- Nasser S. Al Hajri Corporation HSE Officer Interview Questions
- Nasser S. Al Hajri Corporation Piping Supervisor Interview Questions
- Nasser S. Al Hajri Corporation Quality Analyst Interview Questions
- Nasser S. Al Hajri Corporation Electrical Engineer Interview Questions
- Nasser S. Al Hajri Corporation Quality Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 1 interview experience
Difficulty level
Duration
Interview Questions from Similar Companies
Nasser S. Al Hajri Corporation Scaffolding Supervisor Reviews and Ratings
based on 9 reviews
Rating in categories
|
Piping Engineer
71
salaries
|  ₹5 L/yr - ₹18 L/yr |
|
Piping Supervisor
59
salaries
| ₹4 L/yr - ₹16 L/yr |
|
Planning Engineer
43
salaries
| ₹5.8 L/yr - ₹15.2 L/yr |
|
QC Inspector
41
salaries
| ₹8.7 L/yr - ₹15 L/yr |
|
Electrical Engineer
39
salaries
| ₹6.4 L/yr - ₹14.6 L/yr |
Alstom Transportation
Saint-Gobain
AECOM
AtkinsRealis
- Home >
- Interviews >
- Nasser S. Al Hajri Corporation Interview Questions
