Add office photos
Filter interviews by
MSN Laboratories Civil Site Engineer Interview Questions and Answers
MSN Laboratories Civil Site Engineer Interview Experiences
1 interview found
Anonymous
Selected
I applied via Walk-in and was interviewed in Nov 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Bag-round verification
- Q2. Experience verification
(1 Question)
- Q1. About execution
Top trending discussions
Interview questions from similar companies
Selected
I applied via Naukri.com and was interviewed in Feb 2023. There were 2 interview rounds.
(3 Questions)
- Q1. What to look for first when looking at a drawing?
- Ans.
Look for key details such as dimensions, scale, title block, notes, and symbols.
Check the title block for project information, scale, and revision number.
Review the dimensions to understand the size and layout of the project.
Look for notes that provide important information or instructions.
Identify symbols that represent different elements or materials on the drawing.
Pay attention to any legends or key plans that expla
- Q2. What to look for first to do any work?
- Q3. If any work is completed, what should be observed in it?
- Ans.
Observation of completed work is crucial to ensure quality and compliance with specifications.
Check if the work meets the design specifications
Inspect for any defects or deficiencies
Ensure proper materials and construction techniques were used
Verify that all safety standards were followed
Document any deviations or changes made during construction
Interview Preparation Tips
I applied via Referral and was interviewed before Apr 2020. There were 4 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Density of steel
- Ans.
The density of steel is approximately 7.85 grams per cubic centimeter.
The density of steel is a measure of how much mass is contained in a given volume of steel.
It is commonly expressed in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).
The density of steel can vary depending on the specific type and composition of the steel alloy.
For example, the density of carbon steel is generally around 7.85...
- Q2. Formula to find Unit weight of steel
- Ans.
Formula to find unit weight of steel
Unit weight of steel = Density of steel x Volume of steel
Density of steel = 7850 kg/m³
Volume of steel = Area of steel x Length of steel
Example: Unit weight of a 10mm diameter steel bar of length 1 meter = 0.785 x 1 x 7850 = 6162.25 grams
Example: Unit weight of a 12mm diameter steel bar of length 12 meters = 0.888 x 12 x 7850 = 835584 grams
- Q3. Frog size of brick
- Ans.
The frog size of a brick refers to the distance between the two parallel sides of a brick.
The frog size is typically measured in millimeters.
It is important for proper bricklaying and mortar application.
The size of the frog can vary depending on the type and size of the brick.
For example, a standard brick may have a frog size of around 10-15mm.
Some bricks may not have a frog at all.
Interview Preparation Tips
(1 Question)
- Q1. Total Experience, Current Employment, Education, Current CTC
(1 Question)
- Q1. Basic Technical Question
Interview Preparation Tips
I applied via Referral and was interviewed in Nov 2020. There were 3 interview rounds.
Interview Questionnaire
4 Questions
- Q1. 1- tell something special about your self? (my recommendation- tell your achievements in easy and short that should impressed your employer)
- Q2. About your previous experience? (my recommendation- should answer honestly)
- Q3. Methodologies/management used in your project for increased quality and decreased time and cost of project.
- Ans.
We implemented Lean Construction methodologies to improve quality and reduce project duration and costs.
Implemented Lean Construction methodologies
Used value engineering to optimize project costs
Implemented quality control measures at every stage of the project
Utilized project management software for efficient scheduling and resource allocation
Implemented continuous improvement processes to identify and address bottlen...
- Q4. And some simple questions related your education qualification (about your subject) mainly from rcc, estimation and reinforcement etc.
Interview Preparation Tips
2- Always be confident to the answer.
3- Do not add fake experience in your resume.
Selected
I applied via Naukri.com and was interviewed in Feb 2023. There were 2 interview rounds.
(3 Questions)
- Q1. What to look for first when looking at a drawing?
- Ans.
Look for key details such as dimensions, scale, title block, notes, and symbols.
Check the title block for project information, scale, and revision number.
Review the dimensions to understand the size and layout of the project.
Look for notes that provide important information or instructions.
Identify symbols that represent different elements or materials on the drawing.
Pay attention to any legends or key plans that expla
- Q2. What to look for first to do any work?
- Q3. If any work is completed, what should be observed in it?
- Ans.
Observation of completed work is crucial to ensure quality and compliance with specifications.
Check if the work meets the design specifications
Inspect for any defects or deficiencies
Ensure proper materials and construction techniques were used
Verify that all safety standards were followed
Document any deviations or changes made during construction
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Oct 2022. There were 2 interview rounds.
(3 Questions)
- Q1. Electronics and communication skills
- Q2. Electronic and communication skills related
- Q3. Electronic components
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Mar 2021. There were 2 interview rounds.
(1 Question)
- Q1. Engineer control, SAP work, PR ,Po
Interview Preparation Tips
(2 Questions)
- Q1. Tell about yourself and your ambitions
- Q2. Why are you choosing this job
Make sure to learn according to your subject
Interview Preparation Tips
(2 Questions)
- Q1. Environmental plants are required to be planted
- Ans. Sewerage effluent is required to be treated up to trussary level
- Q2. Rainy well are required to be dug in the unit campus to avoid water logging
- Ans. Under ground rainwater storage reservoirs are required to be constructed and use that water for irrigation to plants during summer
Interview Preparation Tips
MSN Laboratories Interview FAQs
Tell us how to improve this page.
MSN Laboratories Interviews By Designations
- MSN Laboratories Executive Interview Questions
- MSN Laboratories Senior Executive Interview Questions
- MSN Laboratories Executive Trainee Interview Questions
- MSN Laboratories Junior Executive Interview Questions
- MSN Laboratories Junior Manager Interview Questions
- MSN Laboratories Assistant Manager Interview Questions
- MSN Laboratories Junior Executive Trainee Interview Questions
- MSN Laboratories Project Manager Interview Questions
- Show more
Interview Questions for Popular Designations
- Civil Site Supervisor Interview Questions
- Civil Engineer Interview Questions
- Senior Civil Site Engineer Interview Questions
- Junior Engineer Civil Interview Questions
- Senior Civil Engineer Interview Questions
- Civil Foreman Interview Questions
- Site Engineer Interview Questions
- Civil Supervisor Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
MSN Laboratories Civil Site Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Executive
1.6k
salaries
|  ₹1.6 L/yr - ₹8.2 L/yr |
|
Senior Executive
1.4k
salaries
| ₹2.2 L/yr - ₹9.9 L/yr |
|
Junior Manager
630
salaries
| ₹5.1 L/yr - ₹11.9 L/yr |
|
Junior Executive
507
salaries
| ₹1.4 L/yr - ₹5.2 L/yr |
|
Assistant Manager
292
salaries
| ₹7.4 L/yr - ₹13.6 L/yr |
Sun Pharmaceutical Industries
Dr. Reddy's
Cipla
Biocon Limited
Calculate your in-hand salary
- Home >
- Interviews >
- MSN Laboratories Interview Questions >
- MSN Laboratories Civil Site Engineer Interview Questions
