AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
MM AUTO Quality Engineer Interview Questions and Answers
8 Interview questions
APQP stands for Advanced Product Quality Planning.
APQP is a structured approach to product development and manufacturing.
It is a framework used to ensure that quality is built into a product from the beginning.
APQP involves cross-functional collaboration and proactive planning.
It includes various phases such as planning, design, development, and production.
APQP helps in identifying and mitigating potential risks a...
TPM is a maintenance strategy to maximize equipment effectiveness. OEE measures production efficiency. CTCQ, IPQC, and CSR are quality control measures.
TPM stands for Total Productive Maintenance and is a strategy to ensure equipment is always available and operating at maximum efficiency.
OEE stands for Overall Equipment Effectiveness and is a measure of how efficiently equipment is being used in production.
CTCQ s...
The 7 QC tools are a set of problem-solving techniques used in quality management. They include Pareto analysis, X-chart and R-chart, why-why analysis, red bin analysis, and root cause analysis.
Pareto analysis is a technique used to prioritize problems or causes based on their frequency or impact.
X-chart and R-chart are statistical control charts used to monitor process variation and identify any out-of-control co...
MSA is Measurement System Analysis used to assess the quality of a measurement system.
MSA helps to identify the sources of variation in a measurement system.
There are two types of MSA: Variable MSA and Attribute MSA.
Variable data is continuous data that can be measured, while Attribute data is discrete data that can be counted.
False and Miss rates are defined to calculate the accuracy of a measurement system.
For e...
SPC stands for Statistical Process Control. CP, CPK, PP, and PPK are statistical indices used to measure process capability.
SPC is a method used to monitor and control processes to ensure they are within acceptable limits.
CP (Process Capability) is a measure of how well a process meets specifications.
CPK (Process Capability Index) is a more robust measure that takes into account both the process mean and variabili...
PPAP stands for Production Part Approval Process. It is a standardized process in the automotive industry to ensure quality of parts.
PPAP is a set of documents and procedures used to ensure that a supplier's parts meet the customer's requirements and specifications.
There are five levels of PPAP documentation, with each level requiring more extensive testing and documentation.
Some of the documents included in a PPA...
Occurrence FMEA is used to identify and prioritize potential failure modes based on their frequency of occurrence.
Occurrence FMEA helps in identifying potential failure modes that occur frequently and prioritizing them for corrective action.
It helps in reducing the risk of failure and improving product quality.
CAPA (Corrective and Preventive Action) is a process used to identify, investigate, and correct problems ...
IATF audit is a quality management system audit for automotive suppliers. It was created to improve quality and reduce waste in the industry.
IATF stands for International Automotive Task Force
The audit is based on the ISO 9001 standard and includes additional requirements specific to the automotive industry
The cause of IATF was to create a globally recognized quality management system for automotive suppliers
The r...
MM AUTO Quality Engineer Interview Experiences
1 interview found
Anonymous
Interview Questionnaire
10 Questions
- Q1. This question 1- what is quality ,
- Q2. What is 7 QC tool,parito analysis,xchart and r chart explain ,why why analysis ,red bin analysis ,what is root cause analysis
- Ans.
The 7 QC tools are a set of problem-solving techniques used in quality management. They include Pareto analysis, X-chart and R-chart, why-why analysis, red bin analysis, and root cause analysis.
Pareto analysis is a technique used to prioritize problems or causes based on their frequency or impact.
X-chart and R-chart are statistical control charts used to monitor process variation and identify any out-of-control conditi...
- Q3. What is SPC ,difine the cp.cpk or pp ppk
- Ans.
SPC stands for Statistical Process Control. CP, CPK, PP, and PPK are statistical indices used to measure process capability.
SPC is a method used to monitor and control processes to ensure they are within acceptable limits.
CP (Process Capability) is a measure of how well a process meets specifications.
CPK (Process Capability Index) is a more robust measure that takes into account both the process mean and variability.
PP...
- Q4. What is MSA and addition of msa version, type of msa ,what different between variable data and attibute data .why difine flase and miss rate calculate by msa .
- Q5. Why calculate by occerane FMEA . Diffine the capa ,and customer relations.
- Ans.
Occurrence FMEA is used to identify and prioritize potential failure modes based on their frequency of occurrence.
Occurrence FMEA helps in identifying potential failure modes that occur frequently and prioritizing them for corrective action.
It helps in reducing the risk of failure and improving product quality.
CAPA (Corrective and Preventive Action) is a process used to identify, investigate, and correct problems that ...
- Q6. Why diffine APQP .
- Ans.
APQP stands for Advanced Product Quality Planning.
APQP is a structured approach to product development and manufacturing.
It is a framework used to ensure that quality is built into a product from the beginning.
APQP involves cross-functional collaboration and proactive planning.
It includes various phases such as planning, design, development, and production.
APQP helps in identifying and mitigating potential risks and en...
- Q7. What is TPM. why diffine OEE value .what CTCQ , ipqc, CSR ,
- Q8. Last question for quality(.1)- what is PPAP .types of ppap document .
- Q9. What is different between costumer and Vander .
- Ans.
A customer purchases goods or services, while a vendor supplies them, forming a crucial business relationship.
Definition: A customer is an individual or organization that buys products or services, while a vendor is a supplier of those products or services.
Role in Transactions: Customers initiate purchases, whereas vendors provide the goods or services needed by customers.
Examples: A hospital (customer) buys medical su...
- Q10. what is IATF audit , cause of IATF , relationship between for IATF and OEM company
- Ans.
IATF audit is a quality management system audit for automotive suppliers. It was created to improve quality and reduce waste in the industry.
IATF stands for International Automotive Task Force
The audit is based on the ISO 9001 standard and includes additional requirements specific to the automotive industry
The cause of IATF was to create a globally recognized quality management system for automotive suppliers
The relati...
Top trending discussions
Interview questions from similar companies
I applied via Naukri.com and was interviewed before Jul 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Coming to AEM,Interviewer has covered all the topics.
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Apr 2020. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. About the basics of c, c++ and java, also asked to explain the project that I developed.
Interview Preparation Tips
I applied via Approached by Company and was interviewed before Dec 2021. There were 3 interview rounds.
(1 Question)
- Q1. What is n-tier architecture
(1 Question)
- Q1. What is your expectation from company
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. Arrays, Linked Lists, STP/RSTP, VLAN, ARP
Interview Questionnaire
1 Question
- Q1. React hooks
Interview Questionnaire
1 Question
- Q1. React hooks
I applied via Naukri.com and was interviewed in Aug 2020. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. Past experience and communication skills
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. Tell me about yourself
- Ans.
I am a Senior Engineer with over 10 years of experience in software development, specializing in scalable systems and team leadership.
Over a decade of experience in software engineering, focusing on backend development and cloud technologies.
Led a team of 5 engineers in developing a microservices architecture for a high-traffic e-commerce platform, improving scalability by 40%.
Proficient in multiple programming languag...
I applied via Job Fair and was interviewed before May 2021. There were 2 interview rounds.
(1 Question)
- Q1. What is your job role
Interview Preparation Tips
MM AUTO Interview FAQs
Some of the top questions asked at the MM AUTO Quality Engineer interview -
Tell us how to improve this page.
Interview Questions for Popular Designations
- Senior Engineer Interview Questions
- QA Engineer Interview Questions
- Junior Engineer Interview Questions
- Test Engineer Interview Questions
- Quality Analyst Interview Questions
- QA QC Engineer Interview Questions
- Quality Inspector Interview Questions
- Senior Quality Engineer Interview Questions
- Show more
Quality Engineer Interview Questions from Similar Companies
MM AUTO Quality Engineer Reviews and Ratings
based on 2 reviews
Rating in categories
TCS
Accenture
Wipro
Cognizant
- Home >
- Interviews >
- MM AUTO Interview Questions
