Filter interviews by
The 7 QC tools are a set of problem-solving techniques used in quality management. They include Pareto analysis, X-chart and R-chart, why-why analysis, red bin analysis, and root cause analysis.
Pareto analysis is a technique used to prioritize problems or causes based on their frequency or impact.
X-chart and R-chart are statistical control charts used to monitor process variation and identify any out-of-control conditi...
SPC stands for Statistical Process Control. CP, CPK, PP, and PPK are statistical indices used to measure process capability.
SPC is a method used to monitor and control processes to ensure they are within acceptable limits.
CP (Process Capability) is a measure of how well a process meets specifications.
CPK (Process Capability Index) is a more robust measure that takes into account both the process mean and variability.
PP...
MSA is Measurement System Analysis used to assess the quality of a measurement system.
MSA helps to identify the sources of variation in a measurement system.
There are two types of MSA: Variable MSA and Attribute MSA.
Variable data is continuous data that can be measured, while Attribute data is discrete data that can be counted.
False and Miss rates are defined to calculate the accuracy of a measurement system.
For exampl...
Occurrence FMEA is used to identify and prioritize potential failure modes based on their frequency of occurrence.
Occurrence FMEA helps in identifying potential failure modes that occur frequently and prioritizing them for corrective action.
It helps in reducing the risk of failure and improving product quality.
CAPA (Corrective and Preventive Action) is a process used to identify, investigate, and correct problems that ...
APQP stands for Advanced Product Quality Planning.
APQP is a structured approach to product development and manufacturing.
It is a framework used to ensure that quality is built into a product from the beginning.
APQP involves cross-functional collaboration and proactive planning.
It includes various phases such as planning, design, development, and production.
APQP helps in identifying and mitigating potential risks and en...
TPM is a maintenance strategy to maximize equipment effectiveness. OEE measures production efficiency. CTCQ, IPQC, and CSR are quality control measures.
TPM stands for Total Productive Maintenance and is a strategy to ensure equipment is always available and operating at maximum efficiency.
OEE stands for Overall Equipment Effectiveness and is a measure of how efficiently equipment is being used in production.
CTCQ stands...
PPAP stands for Production Part Approval Process. It is a standardized process in the automotive industry to ensure quality of parts.
PPAP is a set of documents and procedures used to ensure that a supplier's parts meet the customer's requirements and specifications.
There are five levels of PPAP documentation, with each level requiring more extensive testing and documentation.
Some of the documents included in a PPAP sub...
IATF audit is a quality management system audit for automotive suppliers. It was created to improve quality and reduce waste in the industry.
IATF stands for International Automotive Task Force
The audit is based on the ISO 9001 standard and includes additional requirements specific to the automotive industry
The cause of IATF was to create a globally recognized quality management system for automotive suppliers
The relati...
Top trending discussions
I applied via Freshesworld and was interviewed in Nov 2020. There were 6 interview rounds.
I applied via Walk-in and was interviewed before Apr 2020. There were 5 interview rounds.
I was interviewed before Sep 2020.
Round duration - 140 minutes
Round difficulty - Medium
Test timing was at 2:00 pm , it was conducted in a college and the environment was good for the test. Camera was a primary part of test, so no suspicious activity.
Given two numbers in the form of two arrays where each element of the array represents a digit, calculate the sum of these two numbers and return this sum as an ar...
Given two numbers represented as arrays, calculate their sum and return the result as an array.
Iterate through the arrays from right to left, adding digits and carrying over if necessary
Handle cases where one array is longer than the other by considering the remaining digits
Ensure the final sum array does not have any leading zeros
Round duration - 20 minutes
Round difficulty - Easy
The round was conducted at around 12 p.m. I was called at the college location and then it was conducted. The interviewer was quite polite and frank.
Round duration - 8 minutes
Round difficulty - Easy
This round was conducted right after finishing and clearing the technical round at the same place and on the same day.
Tip 1 : Practice atleast 2-3 Coding problems daily so your logic building becomes stronger.
Tip 2 : Exercise problems based on OOPS concepts and others too.
Tip 3 : If you can have your own project built, then it's the major point and will act as a plus point.
Tip 1 : Your resume should be in standard form, short and simple will be more effective.
Tip 2 : Whatever you have learned, you need to mention it in your resume as that will be your primary source of selection and having project on your resume is important.
I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 3 interview rounds.
I applied via Naukri.com and was interviewed in Jul 2020. There were 4 interview rounds.
I applied via Job Portal and was interviewed before Apr 2021. There was 1 interview round.
Solid principles are a set of design principles for writing maintainable and scalable code in C#.
Single Responsibility Principle (SRP) - a class should have only one reason to change
Open/Closed Principle (OCP) - a class should be open for extension but closed for modification
Liskov Substitution Principle (LSP) - derived classes should be substitutable for their base classes
Interface Segregation Principle (ISP) - client...
I applied via Campus Placement and was interviewed before May 2020. There were 4 interview rounds.
I applied via Naukri.com and was interviewed before Apr 2020. There were 5 interview rounds.
Some of the top questions asked at the MM AUTO interview -
TCS
Accenture
Wipro
Cognizant