Upload Button Icon Add office photos

Filter interviews by

Micron Industries Design Engineer Interview Questions and Answers

Updated 29 Aug 2023

Micron Industries Design Engineer Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Software tool test
Round 3 - HR 

(1 Question)

  • Q1. Normal question

Design Engineer Jobs at Micron Industries

View all

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I was interviewed in Nov 2024.

Round 1 - Technical 

(4 Questions)

  • Q1. Wind calculation as per IS code
  • Ans. 

    The procedure for wind calculation as per IS code involves determining the design wind speed, selecting the appropriate terrain category, and calculating the wind pressure.

    • Determine the design wind speed based on the location and height of the structure.

    • Select the appropriate terrain category (rural, urban, etc.) as per IS code guidelines.

    • Calculate the wind pressure using the formula provided in the IS code.

    • Consider fa...

  • Answered by AI
  • Q2. SFD and BMD of cantilever beam
  • Q3. Staad model for fixed pole
  • Ans. 

    A STAAD model for a fixed pole is a structural analysis and design model used to determine the stability and strength of a pole that is fixed in place.

    • In a STAAD model for a fixed pole, the pole is typically modeled as a vertical member with fixed supports at the base.

    • The model considers factors such as wind loads, dead loads, and any other relevant loads that may act on the pole.

    • The analysis helps in determining the s...

  • Answered by AI
  • Q4. Design of Square base plate
  • Ans. 

    Key considerations in designing a square base plate

    • Ensure the base plate is large enough to support the load without excessive deflection

    • Select appropriate material and thickness to meet structural requirements

    • Consider the connection details for attaching the base plate to the structure

    • Account for any potential corrosion or environmental factors that may affect the base plate

    • Include provisions for anchor bolts or other...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare wind calculation & Steel design
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Gd@t tsa & dfmea
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Aptitude test is so good all questions is important and I solved all questions.

Round 3 - HR 

(1 Question)

  • Q1. All information in my family and so many questions in silyabus
Round 4 - Technical 

(1 Question)

  • Q1. So many questions in technical and disign software
Round 5 - One-on-one 

(1 Question)

  • Q1. No 4th round in that company
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Oct 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Homologation Questions
  • Q2. Design Questions

Interview Preparation Tips

Interview preparation tips for other job seekers - If you want to stay in the Homologation field its a better choice

Interview Questionnaire 

11 Questions

  • Q1. Why leave a current job?
  • Q2. Why you to join the organization?
  • Q3. What is gear ratio?
  • Ans. 

    Gear ratio is the ratio of the number of teeth on the driving gear to the number of teeth on the driven gear.

    • Gear ratio determines the speed and torque relationship between two gears.

    • It is calculated by dividing the number of teeth on the driving gear by the number of teeth on the driven gear.

    • A gear ratio greater than 1 indicates a reduction in speed and an increase in torque, while a ratio less than 1 indicates an inc...

  • Answered by AI
  • Q4. Symbol of First and third angle method?
  • Ans. 

    The symbol of first angle method is a triangle with the vertex pointing downwards. The symbol of third angle method is a triangle with the vertex pointing upwards.

    • First angle method is commonly used in Europe and Asia while third angle method is commonly used in North America.

    • In first angle method, the object is placed in the first quadrant while in third angle method, the object is placed in the third quadrant.

    • The sym...

  • Answered by AI
  • Q5. What is a value of K factor?
  • Ans. 

    The K factor is a value used in sheet metal design to determine the amount of springback that occurs during bending.

    • The K factor is a ratio that relates the neutral axis to the material thickness.

    • It is used to calculate the bend allowance and bend deduction in sheet metal bending operations.

    • A higher K factor indicates more springback, while a lower K factor indicates less springback.

    • Different materials and bending proc...

  • Answered by AI
  • Q6. What is spring back effect?
  • Ans. 

    Spring back effect is the tendency of a material to return to its original shape after being deformed.

    • Spring back effect occurs when a material is bent or stretched and then released, causing it to return to its original shape.

    • It is commonly observed in materials like metals and polymers.

    • The amount of spring back depends on the material's elasticity and the magnitude of the deformation.

    • Spring back can be a desirable or...

  • Answered by AI
  • Q7. What do you mistakes in previous company?
  • Q8. Are you comfort for do work 12+ hours?
  • Q9. How much time you will taken to be a proficiency in inventor?
  • Q10. Explain machining operations of given job?
  • Ans. 

    Machining operations involve using various tools and techniques to shape and cut raw materials into the desired shape and size.

    • The job may involve using lathes, milling machines, grinders, or other specialized equipment.

    • The machinist must carefully measure and mark the material before cutting or shaping it.

    • The machinist may need to use different cutting tools or techniques depending on the material being worked on.

    • Exam...

  • Answered by AI
  • Q11. Type of gearboxes?
  • Ans. 

    There are various types of gearboxes including spur, helical, bevel, worm, planetary, and cycloidal.

    • Spur gearboxes have straight teeth and are the simplest type.

    • Helical gearboxes have angled teeth and are quieter than spur gearboxes.

    • Bevel gearboxes are used for changing the direction of power transmission.

    • Worm gearboxes have a screw-like gear and are used for high reduction ratios.

    • Planetary gearboxes have multiple gear...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Gd & t and basic questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Good
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. Stress Strain curve
  • Q2. IS codes related to steel structures
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Gd@t tsa & dfmea
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Aptitude Test 

Aptitude test is so good all questions is important and I solved all questions.

Round 3 - HR 

(1 Question)

  • Q1. All information in my family and so many questions in silyabus
Round 4 - Technical 

(1 Question)

  • Q1. So many questions in technical and disign software
Round 5 - One-on-one 

(1 Question)

  • Q1. No 4th round in that company

Micron Industries Interview FAQs

How many rounds are there in Micron Industries Design Engineer interview?
Micron Industries interview process usually has 3 rounds. The most common rounds in the Micron Industries interview process are Resume Shortlist, Technical and HR.
How to prepare for Micron Industries Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Micron Industries. The most common topics and skills that interviewers at Micron Industries expect are Design Engineering.
What are the top questions asked in Micron Industries Design Engineer interview?

Some of the top questions asked at the Micron Industries Design Engineer interview -

  1. Software tool t...read more
  2. Normal quest...read more

Tell us how to improve this page.

Micron Industries Design Engineer Salary
based on 6 salaries
₹2.5 L/yr - ₹3.1 L/yr
45% less than the average Design Engineer Salary in India
View more details
Design Engineer

Mumbai

2-3 Yrs

Not Disclosed

Explore more jobs
Service Engineer
18 salaries
unlock blur

₹2 L/yr - ₹4 L/yr

Design Engineer
6 salaries
unlock blur

₹2.5 L/yr - ₹3.1 L/yr

Production Supervisor
5 salaries
unlock blur

₹1.9 L/yr - ₹2.8 L/yr

Quality Engineer
4 salaries
unlock blur

₹2.5 L/yr - ₹3 L/yr

Production Engineer
4 salaries
unlock blur

₹2.3 L/yr - ₹4.4 L/yr

Explore more salaries
Compare Micron Industries with

Intel

4.2
Compare

Texas Instruments

4.2
Compare

Samsung

4.0
Compare

Western Digital

3.5
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview