Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Medha Servo Drives Team. If you also belong to the team, you can get access from here

Medha Servo Drives Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Medha Servo Drives R&D Officer Interview Questions and Answers

Updated 16 Mar 2024

Medha Servo Drives R&D Officer Interview Experiences

1 interview found

R&D Officer Interview Questions & Answers

user image Anonymous

posted on 16 Mar 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Qustions were from nt,machines,pe,Control,analog,digital
  • Q2. All were basics be confident at your answer selection depends on luck

Interview Preparation Tips

Interview preparation tips for other job seekers - It contains two 4 rounds First one is preliminary u will pass easily can copy from home second round is descriptive which is gate level questions were asked and next techinical round followed by hr round I went through all rounds only basics will be tested But selection would based on your luck I went upto hr round but not make in to the final list

Interview questions from similar companies

I applied via Campus Placement and was interviewed in Nov 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Introduction about ourself,projects in UG and PG ,basic of the Core subjects ,about hardware Projects and some HR questions.

Interview Preparation Tips

Interview preparation tips for other job seekers - interview experience is good and have some cofidence in u and answer any question very confidently.

I applied via Job Fair and was interviewed before Nov 2021. There were 2 interview rounds.

Round 1 - Coding Test 

Learn embedded c, learn general aptitude, following same question and question paper again and again

Round 2 - Technical 

(2 Questions)

  • Q1. Learn embedded C related questions.
  • Q2. Learn general aptitude questions.

Interview Preparation Tips

Interview preparation tips for other job seekers - Using same questions and question paper again and again
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. All over the project based question
  • Q2. Details of Ac and Dc machine

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep knowledge about your resume

I applied via Campus Placement and was interviewed in Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Group Discussion 

The question were asked on project and the resume details

Round 3 - HR 

(1 Question)

  • Q1. My qualifications with skills, hobbies, future dream and many others questions based on resume, and also the main thing what i know about the company, minor and major project question in college

Interview Preparation Tips

Interview preparation tips for other job seekers - Be calm, composite and believe in yourself.
Be fluent during an interview and make an eye contact with the person who is taking the question and answer session.
Be confident about whats your strength and weakness.
Have a good dressing sense, if it will be formal looks so i will result in good impact in interview mind

Interview Questionnaire 

1 Question

  • Q1. TELL ME ABOUT YOURSELF

Interview Preparation Tips

Round: Test
Experience: THE TEST WAS VERY EASY AND VERY BASIC QUESTIONS WERE ASKED . TIME LIMIT WAS SUFFICIENT TO ATTEMPT ALL QUESTIONS . FOR CORE SUB QUES FROM BASICS WERE ASKED .
Tips: JUST GO THROUGH THE BASICS . AND REFER RS AGRAWAL FOR LR AND NUMERICAL SECTION
Duration: 75 minutes
Total Questions: 80

Round: Group Discussion
Experience: IT WAS RECENT TOPIC AT THAT TIME . SO BE IN TOUCH WITH RECENT TOPICS . 15 MIN ARE GIVEN FOR GD.
Tips: ALWAYS TRY TO START THE GD THEN IT WILL INCREASE YOUR CHANCES OF SELECTION.

Round: Technical Interview
Experience: MY INTERVIEW WAS VERY SHORT . ONLY QUES FROM TRAINING AND BASIC CORE SUB WERE ASKED . I HAD ANSWERED ALL QUES .
Tips: BE CONFIDENT AND CLEAR YOUR BASICS THAT ALL IS NEEDED TO CRACK THE INTERVIEW.

General Tips: MAINLY YOU SHOULD CLEAR WITH UR BASICS TO CRACK ANY COMPANY RECRUITMENT PROCESS AND BE CONFIDENT TO ANSWER AND ASK ANYTHING DURING THE PROCESS.
Skill Tips: BE CONFIDENT AND HAVE GOOD COMMUNICATION SKILL.
Skills: CONFIDENCE, COMMUNICATION SKILL, GENERAL AWARENESS
College Name: MNIT JAIPUR
Motivation: COMPANY FAME AND GROWTH .

I was interviewed in Aug 2016.

Interview Questionnaire 

3 Questions

  • Q1. Mention the difference between microcontroller and microprocessor?
  • Ans. 

    Microcontroller is a compact computer on a single chip with built-in memory and peripherals, while microprocessor is just a CPU.

    • Microcontroller has on-chip memory and peripherals, while microprocessor requires external memory and peripherals.

    • Microcontroller is used in embedded systems, while microprocessor is used in personal computers.

    • Examples of microcontrollers include Arduino, PIC, and AVR, while examples of microp...

  • Answered by AI
  • Q2. Mention various diodes used in electronic circuits.
  • Ans. 

    Diodes are electronic components that allow current to flow in one direction. Various types of diodes are used in electronic circuits.

    • Rectifier diodes

    • Zener diodes

    • Schottky diodes

    • LEDs

    • Varactor diodes

    • Tunnel diodes

    • Photodiodes

    • PIN diodes

  • Answered by AI
  • Q3. Mention the role of SCR
  • Ans. 

    SCR stands for Silicon Controlled Rectifier. It is a semiconductor device used for power control and switching applications.

    • SCR is used in various applications such as motor control, lighting control, and heating control.

    • It is used in AC power control circuits to regulate the amount of power delivered to a load.

    • SCR is also used in voltage regulators, inverters, and battery chargers.

    • It is a three-terminal device consist...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: This test had 3 sections- Quant,DI and verbal. It was a CAT-type exam but difference was there was time limit of 60-90 seconds for each question.

Tips: Speed and accuracy are important for clearing this test
Duration: 1 hour 30 minutes
Total Questions: 60

Round: Test
Experience: This test contained basic electronics questions.Most of the questions were from 2 nd year sylabbus.
Tips: Be thorough with the basics to ace this test.
Duration: 30 minutes
Total Questions: 30

Round: Technical + HR Interview
Experience: Only 6-7 questions were asked during the interview.All of them were rather simple which involved basic questions.
Tips: Maintain composure during the interview.Dont press the panic button.

Skills: Technical Analysis
College Name: Visvesvaraya National Institute Of Technology

Skills evaluated in this interview

I was interviewed in Nov 2016.

Interview Questionnaire 

1 Question

  • Q1. 1.Difference between the cloud computing and grid computing 2.Differnece between IAAS and SAAS. 3. To write java app components on the project that I had done. Some questions on SQL and HTML
  • Ans. 

    Cloud computing is a network of remote servers hosted on the internet to store, manage, and process data, while grid computing is a distributed computing model that relies on a network of computers to work together on a task.

    • Cloud computing provides on-demand access to a shared pool of configurable computing resources, while grid computing involves the coordination of disparate resources to solve a complex problem.

    • In c...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: It's an one and half hour test with 30 quant, 30 logical and 30 questions on English grammar
Duration: 1 hour 30 minutes
Total Questions: 90

Round: Technical Interview
Experience: They ask you to introduce yourself. Once you have explained the projects you have done, they ask some questions related to it. They check the depth of understanding on the project with some similar related technologies that can be used with the project.
Tips: To have complete understanding of the project you mention with some related technologies that can be used with your project.

College Name: RV College Of Engineering, Bangalore

Skills evaluated in this interview

Interview Questionnaire 

1 Question

  • Q1. Basic technical questions regarding my b.tech specialization I .e, electrical engineering and basci plc programming

I applied via Job Fair

Interview Questionnaire 

2 Questions

  • Q1. Whatis the dol strater
  • Ans. 

    DOL starter is a direct online starter used to start and stop the motor instantly.

    • DOL stands for Direct Online.

    • It is used to start and stop the motor instantly.

    • It is the simplest and cheapest method of starting a motor.

    • It consists of a contactor, overload relay, and start and stop push buttons.

    • It is used for small motors up to 5 horsepower.

    • It is not suitable for large motors as it causes a high starting current.

    • Example...

  • Answered by AI
  • Q2. Dol is direct online strater

Interview Preparation Tips

Interview preparation tips for other job seekers - Kindly ask candidates language also provide good facilities.
Contribute & help others!
anonymous
You can choose to be anonymous

Medha Servo Drives Interview FAQs

How many rounds are there in Medha Servo Drives R&D Officer interview?
Medha Servo Drives interview process usually has 1 rounds. The most common rounds in the Medha Servo Drives interview process are Technical.
What are the top questions asked in Medha Servo Drives R&D Officer interview?

Some of the top questions asked at the Medha Servo Drives R&D Officer interview -

  1. All were basics be confident at your answer selection depends on l...read more
  2. Qustions were from nt,machines,pe,Control,analog,digi...read more

Recently Viewed

INTERVIEWS

Talview

No Interviews

INTERVIEWS

Playto Labs

No Interviews

LIST OF COMPANIES

Medha Servo Drives

Locations

INTERVIEWS

Talview

No Interviews

INTERVIEWS

iMocha

No Interviews

INTERVIEWS

Talview

No Interviews

SALARIES

Elewayte

SALARIES

Elewayte

SALARIES

Elewayte

INTERVIEWS

CIE Automotive

No Interviews

Tell us how to improve this page.

Medha Servo Drives R&D Officer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 418 Interviews
ABB Interview Questions
4.1
 • 235 Interviews
Havells Interview Questions
4.0
 • 209 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
Polycab Wires Interview Questions
4.0
 • 94 Interviews
View all
Service Engineer
248 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
183 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technical Assistant
121 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
101 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
73 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Medha Servo Drives with

Delta Electronics

4.0
Compare

BHEL

4.1
Compare

Siemens

4.1
Compare

ABB

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview