AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
Medha Servo Drives
Compare
Filter interviews by
Clear (1)
Medha Servo Drives Technician Fitter Interview Questions and Answers
Medha Servo Drives Technician Fitter Interview Experiences
2 interviews found
(3 Questions)
- Q1. What is the fitter
- Ans.
A fitter is a skilled technician who is responsible for assembling, installing, and maintaining machinery and equipment.
Fitters read and interpret blueprints and technical drawings
They use a variety of hand and power tools to assemble parts
Fitters may also be responsible for troubleshooting and repairing machinery
Examples: automotive fitters, industrial machinery fitters
- Q2. What is the wrok shop
- Ans.
The workshop is a space where technicians work on machinery, equipment, or vehicles to repair, maintain, or fabricate parts.
Workshop is equipped with tools and machinery for various tasks.
Technicians use hand tools, power tools, and specialized equipment.
Tasks in the workshop include assembly, disassembly, repair, maintenance, and fabrication of parts.
Examples of workshops include automotive repair shops, machine shops
- Q3. A person who puts together or installs machinery,engine parts,or other equipment a qualified gas fitter
- Ans.
A gas fitter is a person who assembles and installs machinery, engine parts, or other equipment related to gas systems.
Gas fitters are responsible for installing, maintaining, and repairing gas appliances and systems.
They must have knowledge of gas regulations and safety standards.
Gas fitters may work in residential, commercial, or industrial settings.
Examples of equipment they work on include gas stoves, water heaters
Interview Preparation Tips
I applied via Walk-in and was interviewed in Nov 2023. There were 3 interview rounds.
Related question about fitter
(1 Question)
- Q1. Hr ask questions related to job
(1 Question)
- Q1. About ou experience
Top trending discussions
Interview questions from similar companies
Graduate Engineer Trainee (Get) Interview Questions & Answers
Havells
Varshika Gupta
posted on 13 Apr 2015
Interview Questionnaire
1 Question
- Q1. TELL ME ABOUT YOURSELF
Interview Preparation Tips
Experience: THE TEST WAS VERY EASY AND VERY BASIC QUESTIONS WERE ASKED . TIME LIMIT WAS SUFFICIENT TO ATTEMPT ALL QUESTIONS . FOR CORE SUB QUES FROM BASICS WERE ASKED .
Tips: JUST GO THROUGH THE BASICS . AND REFER RS AGRAWAL FOR LR AND NUMERICAL SECTION
Duration: 75 minutes
Total Questions: 80
Round: Group Discussion
Experience: IT WAS RECENT TOPIC AT THAT TIME . SO BE IN TOUCH WITH RECENT TOPICS . 15 MIN ARE GIVEN FOR GD.
Tips: ALWAYS TRY TO START THE GD THEN IT WILL INCREASE YOUR CHANCES OF SELECTION.
Round: Technical Interview
Experience: MY INTERVIEW WAS VERY SHORT . ONLY QUES FROM TRAINING AND BASIC CORE SUB WERE ASKED . I HAD ANSWERED ALL QUES .
Tips: BE CONFIDENT AND CLEAR YOUR BASICS THAT ALL IS NEEDED TO CRACK THE INTERVIEW.
General Tips: MAINLY YOU SHOULD CLEAR WITH UR BASICS TO CRACK ANY COMPANY RECRUITMENT PROCESS AND BE CONFIDENT TO ANSWER AND ASK ANYTHING DURING THE PROCESS.
Skill Tips: BE CONFIDENT AND HAVE GOOD COMMUNICATION SKILL.
Skills: CONFIDENCE, COMMUNICATION SKILL, GENERAL AWARENESS
College Name: MNIT JAIPUR
Motivation: COMPANY FAME AND GROWTH .
I was interviewed in Nov 2016.
Interview Questionnaire
1 Question
- Q1. 1.Difference between the cloud computing and grid computing 2.Differnece between IAAS and SAAS. 3. To write java app components on the project that I had done. Some questions on SQL and HTML
- Ans.
Cloud computing is a network of remote servers hosted on the internet to store, manage, and process data, while grid computing is a distributed computing model that relies on a network of computers to work together on a task.
Cloud computing provides on-demand access to a shared pool of configurable computing resources, while grid computing involves the coordination of disparate resources to solve a complex problem.
In c...
Interview Preparation Tips
Experience: It's an one and half hour test with 30 quant, 30 logical and 30 questions on English grammar
Duration: 1 hour 30 minutes
Total Questions: 90
Round: Technical Interview
Experience: They ask you to introduce yourself. Once you have explained the projects you have done, they ask some questions related to it. They check the depth of understanding on the project with some similar related technologies that can be used with the project.
Tips: To have complete understanding of the project you mention with some related technologies that can be used with your project.
College Name: RV College Of Engineering, Bangalore
Skills evaluated in this interview
Graduate Engineer Trainee (Get) Interview Questions & Answers
Siemens
akshay dixit
posted on 20 May 2017
I was interviewed in Aug 2016.
Interview Questionnaire
3 Questions
- Q1. Mention the difference between microcontroller and microprocessor?
- Ans.
Microcontroller is a compact computer on a single chip with built-in memory and peripherals, while microprocessor is just a CPU.
Microcontroller has on-chip memory and peripherals, while microprocessor requires external memory and peripherals.
Microcontroller is used in embedded systems, while microprocessor is used in personal computers.
Examples of microcontrollers include Arduino, PIC, and AVR, while examples of microp...
- Q2. Mention various diodes used in electronic circuits.
- Ans.
Diodes are electronic components that allow current to flow in one direction. Various types of diodes are used in electronic circuits.
Rectifier diodes
Zener diodes
Schottky diodes
LEDs
Varactor diodes
Tunnel diodes
Photodiodes
PIN diodes
- Q3. Mention the role of SCR
- Ans.
SCR stands for Silicon Controlled Rectifier. It is a semiconductor device used for power control and switching applications.
SCR is used in various applications such as motor control, lighting control, and heating control.
It is used in AC power control circuits to regulate the amount of power delivered to a load.
SCR is also used in voltage regulators, inverters, and battery chargers.
It is a three-terminal device consist...
Interview Preparation Tips
Experience: This test had 3 sections- Quant,DI and verbal. It was a CAT-type exam but difference was there was time limit of 60-90 seconds for each question.
Tips: Speed and accuracy are important for clearing this test
Duration: 1 hour 30 minutes
Total Questions: 60
Round: Test
Experience: This test contained basic electronics questions.Most of the questions were from 2 nd year sylabbus.
Tips: Be thorough with the basics to ace this test.
Duration: 30 minutes
Total Questions: 30
Round: Technical + HR Interview
Experience: Only 6-7 questions were asked during the interview.All of them were rather simple which involved basic questions.
Tips: Maintain composure during the interview.Dont press the panic button.
Skills: Technical Analysis
College Name: Visvesvaraya National Institute Of Technology
Skills evaluated in this interview
I applied via Company Website and was interviewed in Apr 2021. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. Technical related
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Polycab Wires
Anonymous
posted on 12 Jan 2022
I applied via Referral and was interviewed in Jul 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Tell me about your self
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Havells
Anonymous
posted on 23 May 2022
I applied via Referral and was interviewed before May 2021. There were 2 interview rounds.
(1 Question)
- Q1. Why havells and where do u see yourself after 20 years.
Interview Preparation Tips
I applied via Job Fair
Interview Questionnaire
2 Questions
- Q1. Whatis the dol strater
- Ans.
DOL starter is a direct online starter used to start and stop the motor instantly.
DOL stands for Direct Online.
It is used to start and stop the motor instantly.
It is the simplest and cheapest method of starting a motor.
It consists of a contactor, overload relay, and start and stop push buttons.
It is used for small motors up to 5 horsepower.
It is not suitable for large motors as it causes a high starting current.
Example...
- Q2. Dol is direct online strater
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Siemens
Anonymous
posted on 4 Apr 2021
Interview Questionnaire
1 Question
- Q1. Basic technical questions regarding my b.tech specialization I .e, electrical engineering and basci plc programming
Medha Servo Drives Interview FAQs
Recently Viewed
INTERVIEWS
Medha Servo Drives
No Interviews
INTERVIEWS
Playto Labs
No Interviews
INTERVIEWS
Medha Servo Drives
No Interviews
INTERVIEWS
Talview
No Interviews
INTERVIEWS
Medha Servo Drives
No Interviews
INTERVIEWS
Talview
No Interviews
LIST OF COMPANIES
Medha Servo Drives
Locations
INTERVIEWS
Talview
No Interviews
INTERVIEWS
iMocha
No Interviews
INTERVIEWS
Talview
No Interviews
Tell us how to improve this page.
Medha Servo Drives Interviews By Designations
- Medha Servo Drives Service Engineer Interview Questions
- Medha Servo Drives Technical Assistant Interview Questions
- Medha Servo Drives R&D Engineer Interview Questions
- Medha Servo Drives Technician Interview Questions
- Medha Servo Drives Graduate Engineer Trainee (Get) Interview Questions
- Medha Servo Drives Technician Fitter Interview Questions
- Medha Servo Drives ITI Electrician Interview Questions
- Medha Servo Drives Engineer Trainee Interview Questions
- Show more
Interview Questions for Popular Designations
- Maintenance Fitter Interview Questions
- Fitter Interview Questions
- Mechanical Fitter Interview Questions
- Mechanical Maintenance Fitter Interview Questions
- ITI Fitter Interview Questions
- Assembly Fitter Interview Questions
- Senior Fitter Interview Questions
- Maintenance Fitter Technician Interview Questions
- Show more
Medha Servo Drives Technician Fitter Interview Process
based on 2 interviews
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
Medha Servo Drives Technician Fitter Reviews and Ratings
based on 3 reviews
Rating in categories
|
Service Engineer
248
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Junior Engineer
183
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Technical Assistant
121
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Engineer
101
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Assistant Engineer
73
salaries
| ₹0 L/yr - ₹0 L/yr |
Delta Electronics
BHEL
Siemens
ABB
- Home >
- Interviews >
- Medha Servo Drives Interview Questions >
- Medha Servo Drives Technician Fitter Interview Questions
