Upload Button Icon Add office photos

Filter interviews by

Marine Electricals Design Engineer Interview Questions and Answers

Updated 1 Oct 2024

Marine Electricals Design Engineer Interview Experiences

3 interviews found

Design Engineer Interview Questions & Answers

user image Ertiga Padir

posted on 1 Oct 2024

Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is capacitor
  • Ans. 

    A capacitor is an electronic component that stores and releases electrical energy in a circuit.

    • Capacitors consist of two conductive plates separated by an insulating material called a dielectric.

    • They are commonly used in electronic circuits to filter out noise, smooth voltage fluctuations, and store energy.

    • Capacitors are rated in farads (F) for their capacitance value.

    • Examples of capacitors include ceramic capacitors, ...

  • Answered by AI

Design Engineer Interview Questions & Answers

user image Manish Sharma

posted on 23 Oct 2022

I applied via Recruitment Consulltant and was interviewed in Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Recruiter asking about previous year and skill set.
  • Q2. If you hired then is that possible company revenue increase with the help of your contribution?
  • Ans. 

    Yes, my skills and experience can contribute to increasing company revenue.

    • I have a proven track record of improving revenue in my previous roles.

    • I can bring innovative ideas and solutions to the table.

    • I am a team player and can collaborate with others to achieve revenue goals.

    • I am constantly learning and adapting to new technologies and market trends.

    • For example, in my previous job, I implemented a new marketing strat...

  • Answered by AI
  • Q3. About your privious year project
  • Q4. General information about you and your family

Interview Preparation Tips

Topics to prepare for Marine Electricals Design Engineer interview:
  • Camming
  • Graphic Designing
  • bending
Interview preparation tips for other job seekers - If you want to learn and want experience then you can join marine.
Or if you want salary then choose others..

Design Engineer Interview Questions Asked at Other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel ... read more
Q2. what is the difference between lathe and milling machine?
Q3. What is design considerations to mske while designing a Part?
Q4. Which are the operations performed on sheet metal to increase the ... read more
Q5. WHAT IS GD&T IN MECHANICAL? DESCRIBLE ALL IN DETAILS .

Interview Questionnaire 

1 Question

  • Q1. Ask starter panel , switchgear Selection ,cable Selection,

Design Engineer Jobs at Marine Electricals

View all

Interview questions from similar companies

Interview Questionnaire 

2 Questions

  • Q1. They asked me mostly about my thesis. And why am i interested in Geotechnical Engg
  • Q2. Starting from modulus of elasticity of soil to liquifaction of soil. It went on like a discussion process
  • Ans. 

    Discussion on soil mechanics starting from modulus of elasticity to liquifaction

    • Modulus of elasticity is a measure of soil stiffness

    • Soil strength is important in determining its ability to withstand loads

    • Liquifaction occurs when soil loses strength and behaves like a liquid

    • Factors affecting soil strength include soil type, moisture content, and stress history

    • Liquifaction can lead to soil failure and damage to structure

  • Answered by AI

Interview Preparation Tips

Round: Interview
Experience: This round went pretty much well and i answered them fairly and easily.

Round: Interview
Experience: This was the round where i felt bit nervous but as i was known well my my subjects i answered them all perfectly.
Tips: Brush up your skills regularly.

General Tips: Have a good sense of your clothing,have confidence on what you speak.
Skills: Technical skills , General Knowledge
College Name: IIT ROORKEE
Motivation: i am a self motivator
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Basic technical questions from mechanical
  • Q2. Basics of mechanical engineering
  • Q3. Mechanical engineering basic questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong in basics
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Aptitude Test 

Paper test given to candidates

Round 3 - Technical 

(5 Questions)

  • Q1. What is your name
  • Q2. Angke of projection explain
  • Ans. 

    Angle of projection refers to the angle at which an object is projected or launched into the air.

    • It is the angle between the horizontal line and the direction in which the object is projected.

    • The angle of projection affects the range and height of the projectile.

    • For maximum range, the angle of projection should be 45 degrees.

    • For maximum height, the angle of projection should be 90 degrees (vertical).

  • Answered by AI
  • Q3. Stress strain defination and curve
  • Q4. Modes of heat transfer
  • Ans. 

    Heat transfer occurs through conduction, convection, and radiation.

    • Conduction: Heat transfer through direct contact between materials (e.g. touching a hot pan)

    • Convection: Heat transfer through the movement of fluids or gases (e.g. boiling water)

    • Radiation: Heat transfer through electromagnetic waves (e.g. feeling the warmth of the sun)

  • Answered by AI
  • Q5. Angle of projection
  • Ans. 

    Angle of projection refers to the angle at which an object is launched into the air.

    • Angle of projection affects the range and height of the projectile.

    • The optimal angle of projection for maximum range is 45 degrees.

    • Different angles of projection result in different trajectories of the projectile.

    • The angle of projection is measured from the horizontal axis.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Who are you
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2024. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Introducing yourself
  • Q2. Why you need this job
Round 2 - Aptitude Test 

Basic Mechanical Engineering

Round 3 - Technical 

(2 Questions)

  • Q1. CAD Knowledge basic
  • Q2. Basic Measurement’s
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Introduction about your self
  • Q2. Why you choose this job
Round 2 - Aptitude Test 

Basic Engineering of Mechanical

Round 3 - Technical 

(2 Questions)

  • Q1. Knowledge about CAD
  • Q2. Measurements usage
  • Ans. 

    Measurements are crucial in design engineering for ensuring accuracy and precision in the development process.

    • Measurements are used to determine dimensions, tolerances, and material properties of components.

    • They help in ensuring that the final product meets the required specifications and standards.

    • Various tools such as calipers, micrometers, and gauges are used for taking measurements.

    • Measurements also play a key role...

  • Answered by AI

Design Engineer Interview Questions & Answers

BHEL user image 439-Bhargava Nadha REDDY

posted on 18 Dec 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. What is oracle database and uses
  • Q2. What is memory and storage
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
-
Result
Selected Selected
Round 1 - One-on-one 

(1 Question)

  • Q1. Moment and shear force diagram
  • Ans. 

    Moment and shear force diagrams are graphical representations of the internal forces acting on a structural element.

    • Moment diagram shows the variation of bending moment along the length of the beam.

    • Shear force diagram shows the variation of shear force along the length of the beam.

    • Both diagrams are essential for designing and analyzing structures.

    • They help in determining the maximum bending moment and shear force that ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be cool

Marine Electricals Interview FAQs

How many rounds are there in Marine Electricals Design Engineer interview?
Marine Electricals interview process usually has 1-2 rounds. The most common rounds in the Marine Electricals interview process are Technical and Resume Shortlist.
How to prepare for Marine Electricals Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Marine Electricals. The most common topics and skills that interviewers at Marine Electricals expect are Design Engineering, AutoCAD, Control Panel, Panel Designing and Electricals.
What are the top questions asked in Marine Electricals Design Engineer interview?

Some of the top questions asked at the Marine Electricals Design Engineer interview -

  1. If you hired then is that possible company revenue increase with the help of yo...read more
  2. what is capaci...read more
  3. Ask starter panel , switchgear Selection ,cable Selectio...read more

Tell us how to improve this page.

Marine Electricals Design Engineer Interview Process

based on 1 interview

Interview experience

2
  
Poor
View more
Marine Electricals Design Engineer Salary
based on 45 salaries
₹2 L/yr - ₹5.4 L/yr
34% less than the average Design Engineer Salary in India
View more details

Marine Electricals Design Engineer Reviews and Ratings

based on 14 reviews

2.9/5

Rating in categories

2.8

Skill development

2.8

Work-life balance

2.7

Salary

3.5

Job security

2.8

Company culture

2.8

Promotions

2.8

Work satisfaction

Explore 14 Reviews and Ratings
Design Engineer
45 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
42 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Estimation Engineer
33 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Service Engineer
32 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design & Development Engineer
28 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Marine Electricals with

Siemens

4.1
Compare

ABB

4.1
Compare

BHEL

4.1
Compare

Larsen & Toubro Limited

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview