Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Marine Electricals Testing & Commissioning Engineer Interview Questions and Answers

Updated 4 Oct 2023

Marine Electricals Testing & Commissioning Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Dol starter work how
  • Ans. 

    A DOL starter, or Direct-On-Line starter, is an electrical device used to start motors by applying full line voltage to the motor terminals.

    • DOL starters provide a simple and cost-effective method of starting motors.

    • They consist of a contactor, overload relay, and start and stop push buttons.

    • When the start button is pressed, the contactor closes and applies full voltage to the motor.

    • The overload relay protects the motor...

  • Answered by AI
  • Q2. Tell me about your

Interview questions from similar companies

Interview Questionnaire 

2 Questions

  • Q1. Asked me questions with motor and ac genrator
  • Q2. Genrator and motor related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - I am taking about Hindi and english language.
Interview experience
3
Average
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Electrical regarding
  • Q2. Testing of HT LT panel
  • Ans. 

    Testing of HT LT panel involves various procedures to ensure its functionality and safety.

    • Testing of HT LT panel includes visual inspection for any physical damage or loose connections.

    • Functional testing is performed to check the operation of various components such as circuit breakers, relays, meters, etc.

    • Insulation resistance testing is conducted to verify the insulation integrity of the panel.

    • High voltage testing is...

  • Answered by AI

Interview Questionnaire 

2 Questions

  • Q1. They asked me mostly about my thesis. And why am i interested in Geotechnical Engg
  • Q2. Starting from modulus of elasticity of soil to liquifaction of soil. It went on like a discussion process
  • Ans. 

    Discussion on soil mechanics starting from modulus of elasticity to liquifaction

    • Modulus of elasticity is a measure of soil stiffness

    • Soil strength is important in determining its ability to withstand loads

    • Liquifaction occurs when soil loses strength and behaves like a liquid

    • Factors affecting soil strength include soil type, moisture content, and stress history

    • Liquifaction can lead to soil failure and damage to structure

  • Answered by AI

Interview Preparation Tips

Round: Interview
Experience: This round went pretty much well and i answered them fairly and easily.

Round: Interview
Experience: This was the round where i felt bit nervous but as i was known well my my subjects i answered them all perfectly.
Tips: Brush up your skills regularly.

General Tips: Have a good sense of your clothing,have confidence on what you speak.
Skills: Technical skills , General Knowledge
College Name: IIT ROORKEE
Motivation: i am a self motivator
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Basic technical questions from mechanical
  • Q2. Basics of mechanical engineering
  • Q3. Mechanical engineering basic questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong in basics
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all Resume tips
Round 2 - Aptitude Test 

Paper test given to candidates

Round 3 - Technical 

(5 Questions)

  • Q1. What is your name
  • Q2. Angke of projection explain
  • Ans. 

    Angle of projection refers to the angle at which an object is projected or launched into the air.

    • It is the angle between the horizontal line and the direction in which the object is projected.

    • The angle of projection affects the range and height of the projectile.

    • For maximum range, the angle of projection should be 45 degrees.

    • For maximum height, the angle of projection should be 90 degrees (vertical).

  • Answered by AI
  • Q3. Stress strain defination and curve
  • Q4. Modes of heat transfer
  • Ans. 

    Heat transfer occurs through conduction, convection, and radiation.

    • Conduction: Heat transfer through direct contact between materials (e.g. touching a hot pan)

    • Convection: Heat transfer through the movement of fluids or gases (e.g. boiling water)

    • Radiation: Heat transfer through electromagnetic waves (e.g. feeling the warmth of the sun)

  • Answered by AI
  • Q5. Angle of projection
  • Ans. 

    Angle of projection refers to the angle at which an object is launched into the air.

    • Angle of projection affects the range and height of the projectile.

    • The optimal angle of projection for maximum range is 45 degrees.

    • Different angles of projection result in different trajectories of the projectile.

    • The angle of projection is measured from the horizontal axis.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Who are you
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2024. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Introducing yourself
  • Q2. Why you need this job
Round 2 - Aptitude Test 

Basic Mechanical Engineering

Round 3 - Technical 

(2 Questions)

  • Q1. CAD Knowledge basic
  • Q2. Basic Measurement’s
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Introduction about your self
  • Q2. Why you choose this job
Round 2 - Aptitude Test 

Basic Engineering of Mechanical

Round 3 - Technical 

(2 Questions)

  • Q1. Knowledge about CAD
  • Q2. Measurements usage
  • Ans. 

    Measurements are crucial in design engineering for ensuring accuracy and precision in the development process.

    • Measurements are used to determine dimensions, tolerances, and material properties of components.

    • They help in ensuring that the final product meets the required specifications and standards.

    • Various tools such as calipers, micrometers, and gauges are used for taking measurements.

    • Measurements also play a key role...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Aug 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. How many detectors in Notifier single loop?
  • Ans. 

    Notifier single loop detectors typically have 126 devices.

    • Notifier single loop systems usually support up to 126 detectors

    • The number of detectors in a Notifier single loop system can vary based on the specific model and configuration

    • It is important to consult the product specifications for the exact number of detectors supported

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - BE confident in your reply

Design Engineer Interview Questions & Answers

BHEL user image 439-Bhargava Nadha REDDY

posted on 18 Dec 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. What is oracle database and uses
  • Q2. What is memory and storage
Contribute & help others!
anonymous
You can choose to be anonymous

Marine Electricals Interview FAQs

How many rounds are there in Marine Electricals Testing & Commissioning Engineer interview?
Marine Electricals interview process usually has 2 rounds. The most common rounds in the Marine Electricals interview process are Resume Shortlist and One-on-one Round.

Recently Viewed

SALARIES

Pinaka Aerospace Solutions

SALARIES

Pinaka Aerospace Solutions

SALARIES

Pinaka Aerospace Solutions

REVIEWS

Pinaka Aerospace Solutions

No Reviews

INTERVIEWS

Marine Electricals

No Interviews

LIST OF COMPANIES

Discover companies

Find best workplace

SALARIES

Pinaka Aerospace Solutions

SALARIES

Pinaka Aerospace Solutions

INTERVIEWS

Marine Electricals

No Interviews

REVIEWS

Bayer Crop Science Vegetable Seeds

No Reviews

Tell us how to improve this page.

Marine Electricals Testing & Commissioning Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 418 Interviews
ABB Interview Questions
4.1
 • 235 Interviews
Havells Interview Questions
4.0
 • 209 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
Falcon Autotech Interview Questions
3.9
 • 44 Interviews
Wipro PARI Interview Questions
3.4
 • 43 Interviews
View all
Marine Electricals Testing & Commissioning Engineer Salary
based on 12 salaries
₹2.6 L/yr - ₹5 L/yr
34% less than the average Testing & Commissioning Engineer Salary in India
View more details

Marine Electricals Testing & Commissioning Engineer Reviews and Ratings

based on 4 reviews

2.8/5

Rating in categories

4.0

Skill development

2.2

Work-life balance

2.5

Salary

2.2

Job security

2.0

Company culture

2.2

Promotions

2.2

Work satisfaction

Explore 4 Reviews and Ratings
Design Engineer
45 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
42 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Estimation Engineer
33 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Service Engineer
32 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design & Development Engineer
28 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Marine Electricals with

Siemens

4.1
Compare

ABB

4.1
Compare

BHEL

4.1
Compare

Larsen & Toubro Limited

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent