Lloyds Metals And Energy Senior Civil Engineer Interview Questions, Process, and Tips

Q1. Cement content in M50 Grade of concrete
Ans. 
The cement content in M50 Grade of concrete is typically around 400 kg/m3.
• Cement content in M50 Grade of concrete is usually around 400 kg/m3

• The exact cement content may vary based on specific project requirements and mix design

• Higher cement content can lead to higher strength but may also increase the risk of cracking

• Proper testing and quality control measures should be in place to ensure the desired strength and dura
Answered by AI
Add your answer

Q1. What is a maximum thickness of slab bar
Ans. 
The maximum thickness of slab bar is typically around 32mm to 40mm.
• The maximum thickness of slab bar is determined by the design requirements and load capacity of the structure.

• In general, the maximum thickness of slab bar is around 32mm to 40mm.

• Thicker slab bars may be used for heavy-duty structures or special design requirements.
Answered by AI
View 1 more answer
Q2. What is M25 grade concrete ratio
Ans. 
M25 grade concrete ratio is 1:1:2 (1 part cement, 1 part sand, 2 parts aggregate)
• M25 grade concrete has a ratio of 1:1:2 for cement, sand, and aggregate respectively

• This means for every part of cement, there is an equal part of sand and double the part of aggregate

• For example, for 1 cubic meter of M25 grade concrete, you would need 1 cubic meter of cement, 1 cubic meter of sand, and 2 cubic meters of aggregate
Answered by AI
View 1 more answer
Q3. What is maximam diameter of dowel bar ?
Ans. 
The maximum diameter of a dowel bar typically ranges from 1 inch to 2 inches.
• Typical maximum diameter of dowel bar is 1 inch to 2 inches

• Dowel bars are commonly used in concrete pavement joints

• The diameter of dowel bars can vary based on the specific project requirements
Answered by AI
Add your answer
Q4. What is 1 M3 of cement volume?
Ans. 
1 M3 of cement volume is equivalent to 1440 kg or 1.44 tonnes.
• 1 M3 of cement volume is equal to 1440 kg or 1.44 tonnes.

• This volume is commonly used in construction projects to calculate the amount of cement needed.

• It is important to accurately measure and calculate cement volume to ensure the structural integrity of the project.
Answered by AI
Add your answer

Q1. They asked about grade of steel, grade of concrete. Also they asked about question regarding foundation engineering
Add your answer

Q1. Technical questions
Add your answer
Q2. Building materials
Add your answer
Q3. Contractor Billing
Add your answer
Q4. Quality assurance
Add your answer
Q5. Team management
Add your answer

What is your civil engineer

Q1. What is fe 415
Add your answer
Q2. Steel grade kitne hote hai
Add your answer

Civil aptitude tests is a broad term for assessment tests evaluation civil understanding and civil knoledge

Q1. Describe the various methods of concrete curing
Ans. 
Various methods of concrete curing include water curing, steam curing, membrane curing, and curing compounds.
• Water curing involves keeping the concrete wet by spraying or ponding water on the surface.

• Steam curing accelerates the curing process by applying steam and heat to the concrete.

• Membrane curing involves covering the concrete with a membrane to retain moisture.

• Curing compounds are liquid chemicals applied to the ...read more
Answered by AI
Add your answer
Q2. Explain concreting process in step- by-step way
Ans. 
Concreting process involves mixing, pouring, leveling, and curing concrete to create a solid structure.
• Prepare the site by setting up formwork to contain the concrete.

• Mix the concrete ingredients - cement, aggregates, water, and additives - in the correct proportions.

• Pour the concrete into the formwork, ensuring it is evenly distributed and compacted.

• Level the concrete surface using tools like screeds or floats to achi...read more
Answered by AI
Add your answer

Q1. What is tmt full form
Ans. 
TMT stands for Thermo-Mechanically Treated. It is a process used to strengthen steel bars for construction purposes.
• TMT is a type of steel reinforcement bar used in construction.

• The TMT process involves subjecting the steel bars to heat treatment followed by rapid cooling.

• This process imparts high strength and ductility to the steel bars, making them suitable for earthquake-resistant structures.

• TMT bars have a ribbed s...read more
Answered by AI
View 6 more answers

Q1. Sefty leadership (SLDC Training complete)
Add your answer

What is the job description and ethics of job

What do you job before working job

Q1. What is the sefty leadership
Ans. 
Safety leadership refers to the ability of a leader to create and maintain a safe work environment.
• Safety leadership involves setting safety goals and expectations for the team

• It also involves providing the necessary resources and training to ensure safety

• Safety leaders must lead by example and prioritize safety in all decision-making

• Effective safety leadership can result in reduced accidents, injuries, and fatalities

• E...read more
Answered by AI
Add your answer

Q1. How working safely with civil job
Add your answer

Q1. Priority understand the job
Add your answer

Q1. Aslo priority of family
Ans. 
Family is a top priority for me as a civil engineer.
• I believe that a healthy work-life balance is important for overall well-being.

• I prioritize my work efficiently to ensure that I can spend quality time with my family.

• I understand that emergencies may arise, but I always try to plan ahead to minimize disruptions to my family life.

• For example, I make sure to schedule important meetings or site visits around my children
Answered by AI
Add your answer

Q1. What is the last salary
Add your answer

Q1. What is the recent salary
Add your answer

Q1. What are your salary expectations?
Add your answer
Q2. Any questions hr team
Ans. My contact no not any time network area ple msg me
Answered Anonymously
View 4 more answers

Diploma

Q1. What are your salary expectations?
Add your answer