L.G.Balakrishnan & Bros CNC Operator Interview Questions and Answers

G code is used to control the movement of the machine, while M code is used to control machine functions.

• G code is used for specifying the movements of the machine, such as cutting speed and tool path.

• M code is used for controlling machine functions like turning on/off coolant or spindle.

• G codes are preparatory functions, while M codes are auxiliary functions.

• Example: G01 is a G code for linear interpolation, M06 is an

m01 is a program stop command used in CNC machining to pause the machine at a specific point in the program.

• m01 is a code used in G-code programming to temporarily stop the CNC machine

• It is often used for tool changes, inspection, or to manually adjust the workpiece

• The machine will remain paused until the operator manually resumes the program

I last worked at a marketing agency specializing in digital advertising.

• Worked at a marketing agency

• Specialized in digital advertising

I have over 5 years of experience in the field.

• 5+ years of experience in the industry

• Extensive knowledge and skills acquired over the years

• Proven track record of successful projects

• Familiarity with industry trends and best practices

G code is a programming language used to control CNC machines.

• G code is a standardized language used to instruct CNC machines on how to perform specific tasks.

• It consists of letters and numbers that represent different commands and parameters.

• For example, G00 is a rapid move command that tells the machine to move quickly to a specified position.

• G01 is a linear interpolation command that tells the machine to move in a s...read more

M code is a standard set of machine codes used to control CNC machines.

• M codes are used to activate or deactivate certain functions on a CNC machine.

• They are typically used for tool changes, coolant control, spindle speed, and other machine functions.

• Examples of M codes include M06 for tool change and M08 for coolant on.

To give offset in CNC machining, adjust the tool position relative to the workpiece.

• Access the offset settings on the CNC machine control panel.

• Enter the desired offset values for length, width, and height adjustments.

• Verify the offset adjustments by running a test program on scrap material.

• Make fine adjustments as needed to achieve the desired machining results.

To start a CNC machine, power on the machine, load the program, set the workpiece, and press the start button.

• Power on the CNC machine by flipping the switch

• Load the program into the machine's control panel

• Set the workpiece securely in place on the machine bed

• Press the start button to begin the machining process