Filter interviews by
Clear (1)
I applied via Approached by Company and was interviewed in Apr 2024. There were 2 interview rounds.
I applied via Referral and was interviewed before Feb 2022. There were 3 interview rounds.
Top trending discussions
G code is a programming language used to control CNC machines.
G code is a standardized language used to instruct CNC machines on how to perform specific tasks.
It consists of letters and numbers that represent different commands and parameters.
For example, G00 is a rapid move command that tells the machine to move quickly to a specified position.
G01 is a linear interpolation command that tells the machine to move in a s...
M code is a standard set of machine codes used to control CNC machines.
M codes are used to activate or deactivate certain functions on a CNC machine.
They are typically used for tool changes, coolant control, spindle speed, and other machine functions.
Examples of M codes include M06 for tool change and M08 for coolant on.
To give offset in CNC machining, adjust the tool position relative to the workpiece.
Access the offset settings on the CNC machine control panel.
Enter the desired offset values for length, width, and height adjustments.
Verify the offset adjustments by running a test program on scrap material.
Make fine adjustments as needed to achieve the desired machining results.
To start a CNC machine, power on the machine, load the program, set the workpiece, and press the start button.
Power on the CNC machine by flipping the switch
Load the program into the machine's control panel
Set the workpiece securely in place on the machine bed
Press the start button to begin the machining process
I applied via Campus Placement and was interviewed before Nov 2020. There was 1 interview round.
I applied via Campus Placement and was interviewed in Apr 2023. There was 1 interview round.
Technical machine cnc machine surface grandinig drilling cylinderical machine
I applied via Job Portal and was interviewed in Oct 2024. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Nov 2024. There was 1 interview round.
based on 2 interviews
Interview experience
based on 11 reviews
Rating in categories
Assistant Manager
133
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
76
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
74
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
58
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
57
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Tata Motors
Mahindra & Mahindra
Ashok Leyland