Upload Button Icon Add office photos

AVTEC

Compare button icon Compare button icon Compare

Filter interviews by

AVTEC Graduate Engineer Interview Questions and Answers

Updated 19 Dec 2020

AVTEC Graduate Engineer Interview Experiences

1 interview found

I applied via campus placement at Anna University and was interviewed in Nov 2020. There were 5 interview rounds.

Interview Preparation Tips

Interview preparation tips for other job seekers - Well even for me also it was a new experience before my interview i research on web about how to be proper while interview , i got some points and i followed , these are
# formal dressing
# sit straight nd eye contact
# comfort zone
# prepared self intro
# ask them some impressive questions
# and the basic things like good morning and some more

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Simple aptitude test was taken

Round 2 - Technical 

(2 Questions)

  • Q1. What are the some common defects in moulds
  • Ans. 

    Common defects in moulds include air pockets, shrinkage, warping, and sink marks.

    • Air pockets: trapped air in the mould causing voids in the final product

    • Shrinkage: uneven cooling leading to dimensional changes in the product

    • Warping: distortion of the product due to uneven cooling or improper mould design

    • Sink marks: depressions on the surface of the product caused by uneven cooling or insufficient packing pressure

  • Answered by AI
  • Q2. What are the causes of those common defects
  • Ans. 

    Common defects in engineering can be caused by factors such as poor design, material issues, manufacturing errors, and environmental conditions.

    • Poor design choices or inadequate specifications

    • Material defects or inconsistencies

    • Manufacturing errors or poor quality control

    • Environmental factors such as temperature, humidity, or corrosion

    • Improper maintenance or usage

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jul 2023. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. 1.Difference between 1st angle &3rd angle projection 2.Stress strain graphs for different materials 3. Material properties etc
  • Ans. 

    1st angle and 3rd angle projection differ in the placement of the object and the observer in relation to the projection plane.

    • 1st angle projection places the object in front of the projection plane, while 3rd angle projection places the object behind the projection plane.

    • In 1st angle projection, the observer views the object from the opposite side of the projection plane, while in 3rd angle projection, the observer vie...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. Verbal and communication skills Introduction, Educational qualification etc
Round 3 - Behavioral 

(1 Question)

  • Q1. Regarding projects did un college days and core technical queations

Interview Preparation Tips

Topics to prepare for CIE Automotive Graduate Engineer Trainee (Get) interview:
  • Catia V5
  • UG NX
  • Geometrical Dimensioning and Tol
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I was interviewed before Feb 2024.

Round 1 - Aptitude Test 

Quants, logical reasoning, and verbal analogy require an understanding of basic concepts along with tips and tricks to effectively solve the questions.

Round 2 - Technical 

(4 Questions)

  • Q1. What are bevel gears and what are their applications?
  • Q2. Define 5 GD&T Symbols, What is difference between Parallism and Flateness
  • Q3. How many microns are equivalent to 1 millimeter?
  • Q4. What is FEA analysis, and what tools are available to perform it?
Round 3 - HR 

(3 Questions)

  • Q1. Why do you want to work with us?
  • Q2. What are your expectations regarding the position?
  • Q3. How would you handle team members who have more experience than you if you are their team leader?

I applied via Company Website and was interviewed in Aug 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Coding Test 

This round contains both Aptitude and Coding related test. This test was conducted Online using DoSelect Platform. Total of 50 MCQ's ,we need to answer them in 60 minutes. Topics are mostly on Electronics, Reasoning and Mathematics.

Round 3 - Technical 

(3 Questions)

  • Q1. What type of Projects do you work in?
  • Q2. Pointer in C Programming
  • Ans. 

    A pointer is a variable that stores the memory address of another variable.

    • Pointers are used to manipulate data structures efficiently.

    • They can be used to pass values by reference to functions.

    • Pointer arithmetic can be used to iterate over arrays.

    • Null pointers are used to indicate that a pointer does not point to a valid address.

  • Answered by AI
  • Q3. Concepts related to your courses and Academics.
Round 4 - One-on-one 

(2 Questions)

  • Q1. Explian about your B.Tech Project from scratch.
  • Q2. Why do you chose Mobis than others?
  • Ans. 

    I chose Mobis because of its reputation for innovation, quality, and commitment to sustainability.

    • Mobis has a strong track record of developing cutting-edge technologies, such as its Advanced Driver Assistance Systems (ADAS) and eco-friendly powertrains.

    • The company is also known for its rigorous quality control processes, ensuring that its products meet the highest standards of safety and reliability.

    • In addition, Mobis...

  • Answered by AI
Round 5 - HR 

(3 Questions)

  • Q1. Briefly exaplin about your self.
  • Q2. How do you prepare for this interview?
  • Q3. Ready to sign for Service agreement?

Interview Preparation Tips

Interview preparation tips for other job seekers - Attend the interview with confidence and be conscious on what you are answering. Brushup your engineering basics before attending.

Skills evaluated in this interview

I applied via LinkedIn and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Speak 5 minutes on your final year project
  • Q2. What is young's modulus and ultimate tensile strength? And what are their SI units?
  • Ans. 

    Young's modulus is a measure of stiffness of a material while ultimate tensile strength is the maximum stress a material can withstand.

    • Young's modulus is the ratio of stress to strain in a material under tension or compression.

    • Ultimate tensile strength is the maximum stress a material can withstand before breaking.

    • Young's modulus is measured in pascals (Pa) while ultimate tensile strength is measured in newtons per squ

  • Answered by AI
  • Q3. When selecting a material what are the properties you take into consideration?
  • Ans. 

    Properties considered when selecting a material

    • Strength and durability

    • Thermal conductivity

    • Electrical conductivity

    • Corrosion resistance

    • Cost

    • Availability

    • Environmental impact

  • Answered by AI
  • Q4. What is meant by enthalpy?
  • Ans. 

    Enthalpy is the sum of internal energy and the product of pressure and volume.

    • Enthalpy is a thermodynamic property of a system.

    • It is represented by the symbol 'H'.

    • It is defined as the sum of internal energy and the product of pressure and volume.

    • Enthalpy change is the difference between the enthalpies of the products and reactants in a chemical reaction.

    • Enthalpy is used in various fields including chemistry, physics, a

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - During introduction speak about your internships as well if freshers.

I applied via Naukri.com and was interviewed in Jul 2022. There was 1 interview round.

Round 1 - Technical 

(8 Questions)

  • Q1. Self your introduction
  • Q2. Electrical vehicles, what is chassis
  • Q3. What is automobile, what is otto ,dual,diesels cycle difference
  • Ans. 

    The question is about the basics of automobile engines and the differences between Otto, Dual, and Diesel cycles.

    • Automobile is a vehicle powered by an engine that converts fuel into mechanical energy.

    • Otto cycle is a four-stroke combustion cycle used in gasoline engines.

    • Dual cycle is a modified version of the Otto cycle that includes a constant volume heat addition process.

    • Diesel cycle is a four-stroke combustion cycle ...

  • Answered by AI
  • Q4. What is coefficient of performance input/output
  • Ans. 

    Coefficient of performance (COP) is the ratio of output heat to input work or energy.

    • COP is used to measure the efficiency of a heat pump or refrigeration system.

    • It is calculated by dividing the output heat by the input work or energy.

    • A higher COP indicates a more efficient system.

    • For example, a heat pump with a COP of 3 can produce three units of heat for every unit of energy input.

    • COP can also be expressed in terms o...

  • Answered by AI
  • Q5. How the otto cycle constants volume this process,
  • Ans. 

    The Otto cycle is a constant volume process used in internal combustion engines.

    • The Otto cycle consists of four processes: intake, compression, combustion, and exhaust.

    • During the intake process, the fuel-air mixture is drawn into the cylinder.

    • During the compression process, the mixture is compressed to a smaller volume, increasing its temperature and pressure.

    • During the combustion process, the mixture is ignited, causi...

  • Answered by AI
  • Q6. What is the Duel cycle principles -both constant volume, and pressure
  • Ans. 

    Dual cycle principles involve both constant volume and pressure processes in an engine cycle.

    • Dual cycle is a combination of Otto and Diesel cycles.

    • It involves two constant volume and one constant pressure processes.

    • The first constant volume process is isentropic compression.

    • The constant pressure process is combustion.

    • The second constant volume process is isentropic expansion.

    • It is used in gas turbine engines and some i

  • Answered by AI
  • Q7. Physical quantities length ,mass time
  • Q8. Efficiency of carnot T1/T2-T1
  • Ans. 

    Efficiency of Carnot cycle is given by T1/T2-T1

    • Efficiency of Carnot cycle is the maximum possible efficiency of a heat engine

    • It depends only on the temperatures of the hot and cold reservoirs

    • Efficiency = 1 - (T1/T2)

    • T1 is the temperature of the cold reservoir and T2 is the temperature of the hot reservoir

  • Answered by AI

Interview Preparation Tips

Topics to prepare for JBM Group Graduate Engineer Trainee (Get) interview:
  • AutoCAD
  • Solidwork
  • Automobile
Interview preparation tips for other job seekers - Design autocad ,SOLIDWORK, quality, maintenance, PDM, etc
But I'm interested Design and quality in work escort company faridabad

I applied via Campus Placement and was interviewed in Jul 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Tell me about CNC machine ?
  • Ans. 

    A CNC machine is a computer-controlled machine tool used for precision machining of various materials.

    • CNC stands for Computer Numerical Control.

    • It uses pre-programmed instructions to control the movement of the machine.

    • CNC machines can perform a wide range of operations such as cutting, drilling, milling, and turning.

    • They are commonly used in manufacturing industries for mass production of parts.

    • CNC machines offer high...

  • Answered by AI
  • Q2. What is. Your favorite subject ?

Interview Preparation Tips

Interview preparation tips for other job seekers - If you are 10th ,12th , diploma , b.tech , you will get job of 10k to 15k. So, don't worry in mechanical field. Just visit sgk.com

I applied via Approached by Company and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Just basic introduction
Round 2 - Technical 

(1 Question)

  • Q1. A average of 30 min technical round questions related to the post you applied for.

Interview Preparation Tips

Interview preparation tips for other job seekers - Do not start your career with this Company, overall zero learning skills and the salary is so poor.

Interview Questionnaire 

1 Question

  • Q1. Engineering Design concepts

Interview Preparation Tips

Interview preparation tips for other job seekers - Brush up on engineering design concepts in relation to industry

Tell us how to improve this page.

Fast track your campus placements

View all
Assistant Manager
133 salaries
unlock blur

₹4 L/yr - ₹11.6 L/yr

Production Engineer
76 salaries
unlock blur

₹1 L/yr - ₹5.6 L/yr

Engineer
74 salaries
unlock blur

₹2.2 L/yr - ₹5.5 L/yr

Senior Engineer
58 salaries
unlock blur

₹3.5 L/yr - ₹7.3 L/yr

Quality Engineer
57 salaries
unlock blur

₹1.4 L/yr - ₹4.5 L/yr

Explore more salaries
Compare AVTEC with

Bharat Forge

3.9
Compare

Tata Motors

4.2
Compare

Mahindra & Mahindra

4.1
Compare

Ashok Leyland

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview