Add office photos
i
Lear Corporation
Compare
Filter interviews by
Lear Corporation Design Engineer Interview Questions and Answers
Lear Corporation Design Engineer Interview Experiences
2 interviews found
(2 Questions)
- Q1. Gajjjjsjjs hsjsjs hsjsjs jsjjs
- Q2. Jajjjjjjj hsjsjs hsjsjjs shsjsjs
(2 Questions)
- Q1. What is Bend Radius?
- Ans.
Bend Radius is the minimum radius a material can be bent without causing damage or deformation.
Bend Radius is a measure of the flexibility of a material.
It is important to consider the Bend Radius when designing parts or structures to ensure they can be bent without breaking.
The Bend Radius is typically specified in the design or manufacturing specifications.
For example, in sheet metal fabrication, the Bend Radius dete...
- Q2. Why do we Provide Beeds on Sheet Metal Parts
- Ans.
Beads are provided on sheet metal parts to increase strength, stiffness, and rigidity.
Beads help to prevent buckling or deformation of the sheet metal under load.
They improve the overall structural integrity of the part.
Beads can also enhance the aesthetic appearance of the part.
They can be used to reinforce specific areas or create a desired shape.
Examples of sheet metal parts with beads include automotive body panels
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Design Engineer Interview Questions & Answers
Samvardhana Motherson Group
Anonymous
posted on 9 Jun 2024
Selected
I applied via Telegram and was interviewed in May 2024. There was 1 interview round.
(2 Questions)
- Q1. What is the relay
- Ans.
A relay is an electrically operated switch that uses an electromagnet to mechanically operate a switch.
Relays are used to control high power circuits with low power signals
They are commonly used in automotive, industrial, and household applications
Relays can be classified based on their operation, such as electromechanical relays or solid-state relays
- Q2. Ohm's law and current
- Ans.
Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it, given constant resistance.
Ohm's law equation: V = I * R (voltage = current * resistance)
Current is the flow of electric charge through a conductor
Higher voltage leads to higher current flow, given constant resistance
Lower resistance leads to higher current flow, given constant voltage
Design Engineer Interview Questions & Answers
Endurance Technologies
Anonymous
posted on 11 Jun 2024
I applied via Naukri.com and was interviewed in May 2024. There was 1 interview round.
(1 Question)
- Q1. Can you friendly with CREO software ?
- Ans.
Yes, I am friendly with CREO software.
I have extensive experience using CREO software for designing and modeling.
I am proficient in creating 3D models, assemblies, and drawings using CREO.
I have successfully completed projects using CREO software in the past.
I am familiar with advanced features and functionalities of CREO software.
Interview Preparation Tips
Skills evaluated in this interview
Selected
I was interviewed in Nov 2023.
(3 Questions)
- Q1. Basics of CAD software.
- Q2. About tools part design assembly and gsd
- Q3. Basic of plastic defects
Selected
(2 Questions)
- Q1. How to add connector in CAptila harness
- Ans.
To add a connector in CAptila harness, you need to use the appropriate tool and follow specific steps.
Open the CAptila harness design software
Select the location where you want to add the connector
Choose the type of connector from the library
Place the connector in the desired location
Connect the wires to the connector pins
Verify the connection and run any necessary simulations
- Q2. Press O then you can directly add connector
Selected
I applied via Referral and was interviewed in Aug 2023. There were 3 interview rounds.
(4 Questions)
- Q1. Engineering drawing, Strength of Materials, Formulas
- Q2. Power torque relation
- Q3. Petrol diesel engine
- Q4. Heat and pump working
(1 Question)
- Q1. Expectation and 5 years association
Alluri Harish
Tough one to attempt
(1 Question)
- Q1. Asked questions related to few mechanical engineering topics
I applied via Recruitment Consulltant and was interviewed in Apr 2023. There were 3 interview rounds.
Cad test on catia software.
(3 Questions)
- Q1. Plastic categories?
- Q2. Prevention of plastic defects?
- Ans.
Preventing plastic defects involves proper material selection, design optimization, and quality control measures.
Selecting the right type of plastic for the application
Optimizing the design to minimize stress concentrations
Implementing proper molding techniques and parameters
Conducting thorough quality control inspections
Addressing any issues promptly to prevent defects from recurring
- Q3. When you make a design in any plastic component. what you are design consideration?
- Ans.
Design considerations for plastic components include material selection, manufacturability, functionality, aesthetics, and cost.
Material selection based on properties like strength, flexibility, and chemical resistance
Consideration of manufacturability, such as moldability and ease of assembly
Ensuring functionality requirements are met, such as mechanical strength or thermal resistance
Aesthetics like color, texture, an...
Interview Preparation Tips
- Product Development
- CATIA
- Injection Moulding
Skills evaluated in this interview
Selected
I applied via Approached by Company and was interviewed before Oct 2022. There were 3 interview rounds.
(1 Question)
- Q1. CAD test will be there and Interview questions related to interior/exterior with respect to Design rules , Homologation
(1 Question)
- Q1. Design rules related, master section related, Homologation related
Interview Preparation Tips
- CATIA
- UG NX
- Homologation
- Surface Modeling
- Part Modeling
- Engineering Drawing
Lear Corporation Interview FAQs
Tell us how to improve this page.
Lear Corporation Interviews By Designations
- Lear Corporation Design Engineer Interview Questions
- Lear Corporation Administration Executive Interview Questions
- Lear Corporation Assistant Manager Quality Interview Questions
- Lear Corporation CAE Engineer Interview Questions
- Lear Corporation Deputy Manager Interview Questions
- Lear Corporation Finance Executive Interview Questions
- Lear Corporation Intern Interview Questions
- Lear Corporation job Inspector Interview Questions
- Show more
Interview Questions for Popular Designations
- Senior Design Engineer Interview Questions
- Mechanical Engg. Design Interview Questions
- Electrical Design Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Junior Design Engineer Interview Questions
- Hardware Design Engineer Interview Questions
- Piping Designer Interview Questions
- Trainee Design Engineer Interview Questions
- Show more
Design Engineer Interview Questions from Similar Companies
Lear Corporation Design Engineer Reviews and Ratings
based on 15 reviews
Rating in categories
|
Design Engineer
143
salaries
|  ₹3 L/yr - ₹9 L/yr |
|
Senior Engineer
109
salaries
| ₹7 L/yr - ₹20.4 L/yr |
|
Lead Engineer
88
salaries
| ₹10 L/yr - ₹23.2 L/yr |
|
Assistant Manager
85
salaries
| ₹8 L/yr - ₹19 L/yr |
|
Senior Design Engineer
76
salaries
| ₹5.5 L/yr - ₹12 L/yr |
Bharat Forge
Samvardhana Motherson Group
Mahindra & Mahindra
Tata Motors
Calculate your in-hand salary
- Home >
- Interviews >
- Lear Corporation Interview Questions >
- Lear Corporation Design Engineer Interview Questions
