Filter interviews by
I applied via Referral and was interviewed in Aug 2021. There were 3 interview rounds.
Top trending discussions
Least count is the smallest measurement that can be taken by an instrument.
It is the smallest value that can be measured by an instrument.
It is determined by the precision of the instrument.
For example, the least count of a ruler with millimeter markings is 1 mm.
It is important to consider the least count when taking measurements to ensure accuracy.
Stress is the force applied per unit area, while strain is the deformation caused by stress.
Stress is a measure of the force applied to a material per unit area
Strain is the measure of the deformation caused by stress
Stress and strain are related by the material's elasticity and its ability to resist deformation
Stress can be tensile, compressive, or shear
Strain can be elastic, plastic, or failure
Examples include stretc...
Important quality documents include SOPs, work instructions, quality manuals, and validation protocols.
Standard Operating Procedures (SOPs) outline step-by-step instructions for performing tasks
Work instructions provide detailed instructions for specific tasks
Quality manuals outline the quality management system of an organization
Validation protocols ensure that equipment, processes, and systems meet predetermined spec
posted on 22 Feb 2022
posted on 8 Feb 2025
I have extensive experience in implementing QC procedures and conducting inspections as a Quality Control Inspector.
Developing and implementing QC procedures to ensure product quality
Conducting inspections and tests to identify defects or non-conformities
Documenting findings and reporting on quality issues
Collaborating with production teams to address quality concerns
Continuous improvement of QC processes based on feed
I applied via Walk-in
About your job, location, CTC
I applied via Walk-in and was interviewed in Apr 2023. There were 2 interview rounds.
Construction procedure involves planning, designing, obtaining permits, site preparation, foundation construction, framing, finishing, and inspections.
Planning and designing the project
Obtaining necessary permits
Site preparation and excavation
Foundation construction
Framing and structural work
Installation of utilities and systems
Finishing touches such as painting and flooring
Final inspections and approvals
Beam lapping position refers to the location where two beams overlap or intersect in a structural element.
Beam lapping position is important for ensuring structural integrity and load-bearing capacity.
Common beam lapping positions include end-to-end, side-by-side, and staggered lapping.
Proper beam lapping position is determined by engineering calculations and design specifications.
The tile procedure is a method used in computer graphics to fill a region with a repeating pattern or image.
The tile procedure involves dividing the region into smaller tiles and filling each tile with the desired pattern or image.
It is commonly used in graphic design software to create seamless textures or backgrounds.
The size and shape of the tiles can be adjusted to achieve different visual effects.
Examples of tile ...
I applied via Walk-in and was interviewed in Apr 2023. There were 2 interview rounds.
I applied via Approached by Company and was interviewed in Feb 2023. There were 3 interview rounds.
I applied via Walk-in and was interviewed in Aug 2023. There were 4 interview rounds.
A chiller is a machine that removes heat from a liquid via a vapor-compression or absorption refrigeration cycle.
Chillers are commonly used in air conditioning systems to cool buildings or industrial processes.
They work by transferring heat from the liquid being chilled to a separate fluid, which is then circulated through a heat exchanger to cool it down.
Chillers can be water-cooled or air-cooled, depending on the app
Salary and job responsibilities
posted on 21 Dec 2019
I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 4 interview rounds.
The least count of vernier caliper is the smallest measurement that can be read on the scale.
The least count is determined by the number of divisions on the vernier scale and the main scale.
It is usually 0.02 mm or 0.001 inch for a standard vernier caliper.
The least count can be calculated using the formula: Least count = (1 main scale division) / (number of divisions on the vernier scale).
For example, if the main scal...
Stress vs strain diagram shows the relationship between stress and strain in a material.
Stress is the force applied per unit area of a material.
Strain is the deformation or change in shape of a material due to stress.
The diagram plots stress on the y-axis and strain on the x-axis.
The slope of the curve represents the material's stiffness or Young's modulus.
The area under the curve represents the material's toughness.
Di...
Types of measurement include direct, indirect, nominal, ordinal, interval, and ratio.
Direct measurement involves physically measuring the object or phenomenon being studied.
Indirect measurement involves using other measurements or calculations to determine the value being studied.
Nominal measurement involves categorizing data into distinct groups or categories.
Ordinal measurement involves ranking data in a specific ord...
based on 10 reviews
Rating in categories
Site Engineer
121
salaries
| ₹2.4 L/yr - ₹6 L/yr |
Senior Engineer
88
salaries
| ₹3.8 L/yr - ₹8.5 L/yr |
Civil Site Engineer
62
salaries
| ₹1.8 L/yr - ₹5.8 L/yr |
QA QC Engineer
51
salaries
| ₹1.8 L/yr - ₹6.6 L/yr |
MEP Engineer
49
salaries
| ₹1.4 L/yr - ₹7 L/yr |
Sterling & Wilson
Nasser S. Al Hajri Corporation
Ramky Infrastructure
Dodsal Engineering & Construction