L&T Energy Hydrocarbon Civil Site Engineer Interview Questions and Answers for Experienced

Q1. Basic Geotechnical questions
Add your answer
Q2. Piling Design, Shallow Foundation Design, International Codes for subsea structure foundation designs.
Add your answer

Q1. Most interview question based on resume only. And related oil and gas industry.
Add your answer

Q1. Salary discussion
Add your answer

Q1. Which column takes more load short or Long Column
Add your answer
Q2. What kind of pressures will impose on the water tank walls during seismic
Add your answer

Q1. How will you identify if a pump is cavitating while working on a DCS panel?
Ans. 
To identify if a pump is cavitating while working on a DCS panel, you can look for certain indicators.
• Monitor the pump's suction pressure. If it is fluctuating or dropping below the specified range, it may indicate cavitation.

• Check the pump's discharge pressure. If it is higher than normal, it could be a sign of cavitation.

• Listen for unusual noises such as a rattling or grinding sound coming from the pump.

• Inspect the p...read more
Answered by AI
View 2 more answers
Q2. How would you prepare a hydrocarbon vessel for vessel entry?
Ans. 
To prepare a hydrocarbon vessel for vessel entry, follow these steps:
• Ensure the vessel is properly isolated from the process and all sources of energy

• Ventilate the vessel to remove any flammable or toxic gases

• Perform a thorough inspection of the vessel for any signs of leaks or damage

• Implement proper lockout/tagout procedures to prevent accidental activation of equipment

• Provide appropriate personal protective equipment...read more
Answered by AI
View 2 more answers

My GD topic was renewable energy.

Q1. Tell me about yourself
Ans. 
I am a Senior Engineer with 10+ years of experience in designing and implementing complex systems.
• 10+ years of experience in engineering

• Specialize in designing and implementing complex systems

• Strong problem-solving skills

• Experience with various programming languages such as Java, Python, and C++
Answered by AI
Add your answer
Q2. Why do you want to leave your previous company and join GAIL
Ans. 
Seeking new challenges and growth opportunities at GAIL.
• Desire for new challenges and opportunities for growth

• Interested in working in a different industry or with different technologies

• Attracted to GAIL's reputation and projects

• Seeking a more collaborative and innovative work environment
Answered by AI
Add your answer
Q3. What do your parents do
Ans. 
My parents are both retired now, but my father used to work as a civil engineer and my mother was a teacher.
• Father worked as a civil engineer

• Mother was a teacher

• Both are retired now
Answered by AI
Add your answer
Q4. Have you ever visited Delhi earlier
Ans. 
Yes, I have visited Delhi earlier for a business trip.
• Visited Delhi for a business trip

• Explored historical sites like Red Fort and Qutub Minar

• Enjoyed local cuisine like butter chicken and chaat
Answered by AI
Add your answer
Q5. How did you reach Noida for interview
Add your answer
Q6. Where are you staying in Noida for interview process
Ans. 
I am staying at a hotel in Sector 18, Noida for the interview process.
• Staying at a hotel in Sector 18, Noida

• Close to the interview location

• Comfortable accommodation for the duration of the process
Answered by AI
Add your answer
Q7. Related family background
Add your answer

Q1. Detailed technical questions about bearing, pump, furnace tubes (1st and 2nd pass)MOC, TLE MOC, heat exchanger tube MOC, TEMA codes and classification etc.
Add your answer
Q2. Decoking process of cracking furnace, Naphtha circuit of furnace with sketches,
Ans. 
Decoking process involves removing coke deposits from cracking furnace and naphtha circuit to maintain efficiency.
• Decoking process involves burning off coke deposits using controlled combustion.

• Mechanical decoking involves using high-pressure water jets to remove coke deposits.

• Chemical decoking involves using solvents or acids to dissolve coke deposits.

• Regular decoking is essential to prevent blockages and maintain fur
Answered by AI
Add your answer
Q3. Detailed refrigeration cycles
Ans. 
Refrigeration cycles are thermodynamic processes used in refrigerators and air conditioners to transfer heat from a low temperature reservoir to a high temperature reservoir.
• Refrigeration cycles typically involve four main components: compressor, condenser, expansion valve, and evaporator.

• The refrigerant undergoes a cycle of compression, condensation, expansion, and evaporation to absorb heat from the space being coole...read more
Answered by AI
Add your answer
Q4. Safety related questions which I couldn't answer well
Add your answer
Q5. Safety procedures before starting of hot job
Ans. 
Safety procedures before starting a hot job include obtaining a hot work permit, conducting a hazard assessment, ensuring proper ventilation, and having fire extinguishing equipment nearby.
• Obtain a hot work permit before starting any hot job

• Conduct a hazard assessment to identify potential risks

• Ensure proper ventilation in the work area to prevent buildup of flammable gases

• Have fire extinguishing equipment nearby and r
Answered by AI
Add your answer
Q6. Furnace tubes Welding related questions
Add your answer
Q7. Scaffolding and insulation related general questions (easy)
Add your answer

Q1. Based on the experiences and technical information provided in resume
Add your answer
Q2. Based on the standards mentioned in resume regarding oil and gas
Add your answer

Q1. Input output list the digital and analog signals from field instruments to control room via the single core and multicore cables via the junction boxes.
Add your answer
Q2. What is dca an# plc
Ans. 
DCA and PLC are commonly used acronyms in the field of engineering.
• DCA stands for Direct Current Amplifier, which is a device used to amplify direct current signals.

• PLC stands for Programmable Logic Controller, which is a digital computer used for automation of electromechanical processes.

• DCA and PLC are essential components in various engineering applications such as industrial automation and control systems.
Answered by AI
Add your answer