AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
L&T Construction Trainee Interview Questions, Process, and Tips
Top L&T Construction Trainee Interview Questions and Answers
- Q1. What is full form of tmt
- Q2. What is fineness modulas
- Q3. tell me about grouting
L&T Construction Trainee Interview Experiences
4 interviews found
(2 Questions)
- Q1. Tell me about grouting
- Ans.
Grouting is a process of filling gaps or voids with a fluid material to provide support or seal structures.
Grouting is commonly used in construction to fill gaps between tiles, bricks, or concrete blocks.
It can also be used in geotechnical engineering to improve soil properties or stabilize foundations.
Different types of grouting materials include cementitious grout, epoxy grout, and chemical grout.
The process involves...
- Q2. What is pressure of groutin
- Ans.
Pressure grouting is a construction technique used to improve soil or rock properties by injecting grout into the ground under pressure.
Pressure grouting is commonly used in construction to stabilize foundations, fill voids, and improve soil strength.
The grout material can be cement-based, chemical-based, or a combination of both.
The pressure of the grout injection is carefully controlled to ensure proper distribution ...
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed in Dec 2022. There were 3 interview rounds.
1 .Verbal communication
(1 Question)
- Q1. 1.gearbox function 2.Shaft types 3.qrqtc full form
Interview Preparation Tips
- Written Test
1.self introduction
2.your college project
3.internship
I applied via Campus Placement and was interviewed in Aug 2021. There were 3 interview rounds.
Aptitude test little bit tough
(3 Questions)
- Q1. They have asked basic basic questions
- Q2. What is fineness modulas
- Ans.
Fineness modulus is a measure of the fineness of an aggregate.
It is calculated by adding the cumulative percentages of aggregate retained on each of the standard sieves, dividing the sum by 100, and subtracting it from 1.
It is used to determine the particle size distribution of an aggregate sample.
A lower fineness modulus indicates a finer aggregate and a higher fineness modulus indicates a coarser aggregate.
It is an i...
- Q3. What is full form of tmt
- Ans.
TMT stands for Thermo-Mechanically Treated steel.
TMT steel is known for its high strength and ductility.
It is widely used in construction for reinforcement purposes.
The process of TMT involves rapid cooling of hot rolled steel bars.
This results in a hard outer layer and a soft inner core, making it more resistant to bending and breaking.
TMT bars are available in various grades such as Fe 415, Fe 500, Fe 550, and Fe 600
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed before Jun 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Gear box functions
- Ans.
The gear box functions to transfer power from the engine to the wheels, allowing the vehicle to change speed and direction.
Transfers power from the engine to the wheels
Allows the vehicle to change speed and direction
Consists of gears that mesh together to provide different gear ratios
- Q2. 1.what is 5s 2.what is your project 3.share yours internship
Interview Preparation Tips
- Aptitude
- Verbal Communication
2.project
3.internship
L&T Construction interview questions for designations
Interview questions from similar companies
I applied via Recruitment Consultant and was interviewed before Oct 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. About the background
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
Simplex Infrastructures
Anonymous
posted on 30 Nov 2023
Selected
I appeared for an interview before Nov 2022.
(2 Questions)
- Q1. Earth moving Equipment, crusher plant,hotmix plant concrete plant, operation and maintenance
- Q2. Plant and equipment related
Senior Engineer Interview Questions & Answers
Simplex Infrastructures
Anonymous
posted on 30 Nov 2022
Selected
I applied via Job Portal
(3 Questions)
- Q1. How many year experience ?
- Q2. How to use bentonite use before pulsing
- Ans.
Bentonite is used as a drilling fluid to stabilize boreholes before pulsing.
Bentonite is mixed with water to form a slurry and pumped into the borehole.
The slurry fills the borehole and stabilizes the walls, preventing collapse.
After the bentonite has set, pulsing can be done without the risk of borehole collapse.
Pulsing is a technique used in geophysical exploration to measure the properties of the subsurface.
- Q3. 1.03 mgl to 1.10 mgl
Interview Preparation Tips
Selected
I applied via Referral and was interviewed in Jan 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Productivity of Machinery & Manpower
- Ans.
Productivity of machinery and manpower is crucial for efficient operations.
Efficient machinery and skilled manpower can increase productivity.
Regular maintenance of machinery can prevent downtime and increase productivity.
Proper training and motivation of manpower can also improve productivity.
Use of automation and technology can further enhance productivity.
Productivity can be measured using metrics such as output per
- Q2. Standard thumb rule in estimation
- Ans.
Standard thumb rule in estimation
Thumb rule is a rough estimate based on experience
It is not accurate and can vary based on project
Example: 1 hour per page for content writing
Example: 1 month per developer for a software project
Interview Preparation Tips
I applied via Job Fair and was interviewed before Apr 2022. There were 2 interview rounds.
(3 Questions)
- Q1. Naaa g g g g
- Q2. Dddd fvv fffh hhhb
- Q3. Fggg gghh ggghbhbbbbb hhhhh
Selected
I applied via Approached by Company and was interviewed before Oct 2022. There were 3 interview rounds.
(2 Questions)
- Q1. What is your name
- Q2. Explain your self
(3 Questions)
- Q1. Explain your self
- Q2. Are you know about wood governing
- Ans.
Wood governing refers to the regulations and standards that govern the use of wood in construction and engineering projects.
Wood governing includes codes, standards, and regulations related to the design, construction, and maintenance of wooden structures.
Knowledge of wood governing is important for ensuring compliance with safety and quality standards in engineering projects.
Examples of wood governing organizations in...
- Q3. How maintain furnace draft
- Ans.
Maintaining furnace draft involves controlling air flow to ensure proper combustion and heat transfer.
Regularly clean and inspect the furnace and chimney to prevent blockages
Adjust the damper to control the amount of air entering the furnace
Use a draft gauge to monitor and adjust draft pressure
Install a barometric damper to automatically regulate draft pressure
Consider installing a draft inducer to improve draft in low
(2 Questions)
- Q1. Why leave your previous company
- Q2. What's your expectation salary
Interview Preparation Tips
L&T Construction Interview FAQs
Tell us how to improve this page.
L&T Construction Interviews By Designations
- L&T Construction Graduate Engineer Trainee (Get) Interview Questions
- L&T Construction Civil Site Engineer Interview Questions
- L&T Construction Senior Engineer Interview Questions
- L&T Construction Civil Engineer Interview Questions
- L&T Construction Site Engineer Interview Questions
- L&T Construction Assistant Manager Interview Questions
- L&T Construction Electrical GET Interview Questions
- L&T Construction Engineer Trainee Interview Questions
- Show more
Interview Questions for Popular Designations
- Graduate Engineer Trainee (Get) Interview Questions
- Management Trainee Interview Questions
- Engineer Trainee Interview Questions
- Graduate Trainee Interview Questions
- Software Engineer Trainee Interview Questions
- Diploma Trainee Engineer Interview Questions
- Internship Trainee Interview Questions
- Programmer Analyst Trainee Interview Questions
- Show more
L&T Construction Trainee Interview Process
based on 3 interviews
1 Interview rounds
- Resume Shortlist Round
Interview Questions from Similar Companies
Fast track your campus placements
L&T Construction Trainee Reviews and Ratings
based on 5 reviews
Rating in categories
|
Assistant Manager
1.1k
salaries
|  ₹6.1 L/yr - ₹18.2 L/yr |
|
Senior Engineer
645
salaries
| ₹3 L/yr - ₹12 L/yr |
|
Assistant Construction Manager
490
salaries
| ₹5.4 L/yr - ₹18 L/yr |
|
Civil Site Engineer
399
salaries
| ₹1.2 L/yr - ₹8.4 L/yr |
|
Construction Management
326
salaries
| ₹8.2 L/yr - ₹35 L/yr |
Larsen & Toubro Limited
Dilip Buildcon
Simplex Infrastructures
Power Mech Projects
- Home >
- Interviews >
- L&T Construction Interview Questions >
- L&T Construction Trainee Interview Questions
