Upload Button Icon Add office photos

L&T Construction

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

L&T Construction Safety Supervisor Interview Questions, Process, and Tips

Updated 31 Jan 2025

Top L&T Construction Safety Supervisor Interview Questions and Answers

View all 17 questions

L&T Construction Safety Supervisor Interview Experiences

7 interviews found

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Which device is used to prevent fire in gas cutting set ?
  • Ans. 

    Flashback arrestor is used to prevent fire in gas cutting set.

    • Flashback arrestor is a safety device designed to prevent the flame from traveling back into the gas supply line.

    • It works by extinguishing the flame front before it can reach the gas source.

    • There are different types of flashback arrestors for different gases such as oxygen, acetylene, propane, etc.

  • Answered by AI
  • Q2. What is the risk ?
  • Ans. 

    The risk is the potential for harm, loss, or danger resulting from a specific hazard or situation.

    • Risk is the likelihood of an event occurring and the potential consequences of that event.

    • Identifying and assessing risks is crucial for developing effective safety measures.

    • Examples of risks in a workplace include slips, trips, falls, exposure to hazardous chemicals, and equipment malfunctions.

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. What is Hazard ?
  • Ans. 

    A hazard is a potential source of harm or danger that could cause injury, illness, or damage to property.

    • Hazard is anything that has the potential to cause harm.

    • Hazards can be physical, chemical, biological, ergonomic, or psychosocial in nature.

    • Examples of hazards include slippery floors, toxic chemicals, infectious diseases, poor ergonomics, and workplace stress.

    • Identifying and controlling hazards is essential for mai

  • Answered by AI
  • Q2. What is the base of scaffolding ?
  • Ans. 

    The base of scaffolding is the foundation or support structure on which the scaffolding is built.

    • The base of scaffolding is typically made of sturdy materials such as steel or wood.

    • It is important for the base to be level and stable to ensure the safety of workers using the scaffolding.

    • Examples of base components include base plates, mud sills, and screw jacks.

  • Answered by AI

HCL Healthcare

Rated 4.5 for Work-Life Balance by our employees on AmbitionBox

Success to our employee's well-being? A work-life balance that's simply unbeatable.

Safety Supervisor Interview Questions & Answers

user image pawan mishra

posted on 31 Jan 2025

Interview experience
2
Poor
Difficulty level
Hard
Process Duration
More than 8 weeks
Result
Selected Selected

I was interviewed in Jul 2024.

Round 1 - One-on-one 

(2 Questions)

  • Q1. HSE skill and documents
  • Q2. Audit

Safety Supervisor Interview Questions Asked at Other Companies

Q1. 1> What is Difference between Accident v/s Incident ? 2> Wh ... read more
Q2. How many types of fire extinguisher how many types of sign board ... read more
Q3. 1:-What is safety? 2:-What is confined space? 3:- How any acciden ... read more
asked in Tata Steel
Q4. What is the type of danger ?
Q5. Hazards of confined space, Percentage of O2 in confined space for ... read more
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. Daily work rue teen
  • Q2. Constration side
  • Q3. Tab dismantling work.
  • Q4. Tool box meeting process
  • Ans. 

    Tool box meetings are regular safety meetings held on job sites to discuss potential hazards, safety procedures, and promote a safety culture.

    • Tool box meetings are typically held at the beginning of each work shift or day.

    • Topics discussed include recent incidents, near misses, safety reminders, and any new safety procedures.

    • Employees are encouraged to actively participate by sharing their own experiences and suggestion...

  • Answered by AI
  • Q5. Permit to work training

Interview Preparation Tips

Topics to prepare for L&T Construction Safety Supervisor interview:
  • Industrial management safety
Interview preparation tips for other job seekers - Side handling and all workers training all safety rules
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Oct 2023. There was 1 interview round.

Round 1 - HR 

(5 Questions)

  • Q1. What is the hevey tower
  • Ans. 

    The heavy tower is a structure used in construction projects to support heavy loads and provide stability.

    • Heavy towers are typically made of steel or concrete to withstand the weight of equipment and materials.

    • They are often used in conjunction with cranes to lift and move heavy objects.

    • Heavy towers play a crucial role in ensuring the safety of workers and the success of construction projects.

  • Answered by AI
  • Q2. What is the TPI
  • Ans. 

    TPI stands for Threads Per Inch, a measurement used in manufacturing and engineering to determine the number of threads on a screw or bolt.

    • TPI is calculated by counting the number of threads within a one-inch length on a screw or bolt.

    • Higher TPI values indicate finer threads, while lower TPI values indicate coarser threads.

    • TPI is an important factor in determining the compatibility of nuts and bolts in mechanical assem

  • Answered by AI
  • Q3. What is the work parmit system
  • Ans. 

    A work permit system is a formal written system used to control certain types of work that are potentially hazardous.

    • Work permit systems ensure that proper precautions are taken before high-risk work is carried out.

    • They typically involve a written permit that must be obtained before work begins.

    • Examples of work permit systems include hot work permits, confined space entry permits, and excavation permits.

  • Answered by AI
  • Q4. What is the lifting work system
  • Ans. 

    The lifting work system refers to the process and procedures in place for safely lifting and moving heavy objects in the workplace.

    • Involves assessing the weight and size of the object to be lifted

    • Determining the appropriate lifting equipment to use

    • Ensuring proper lifting techniques are followed to prevent injuries

    • Training employees on safe lifting practices

    • Implementing protocols for team lifts when necessary

  • Answered by AI
  • Q5. What is the welding work hazard s
  • Ans. 

    Welding work hazards include exposure to fumes, gases, radiation, and electrical hazards.

    • Exposure to welding fumes can lead to respiratory issues and metal fume fever.

    • Gases produced during welding, such as carbon monoxide and nitrogen oxides, can be harmful if inhaled.

    • Radiation from welding arcs can cause eye damage and skin burns.

    • Electrical hazards can result from faulty equipment or improper grounding, leading to sho

  • Answered by AI

Interview Preparation Tips

Topics to prepare for L&T Construction Safety Supervisor interview:
  • J2Me
  • Safety
Interview preparation tips for other job seekers - Not fill the any advice sir

L&T Construction interview questions for designations

 Fire & Safety Supervisor

 (1)

 Safety Manager

 (2)

 Senior Safety Officer

 (2)

 HSE Supervisor

 (1)

 MEP Supervisor

 (1)

 Safety Steward

 (2)

 Site Supervisor

 (8)

 Civil Supervisor

 (4)

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Walk-in and was interviewed before Jan 2023. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. What do you understand by safety
  • Ans. 

    Safety refers to the measures and precautions taken to prevent accidents, injuries, and hazards in a given environment.

    • Safety involves identifying and assessing potential risks and hazards.

    • It includes implementing safety protocols and procedures to mitigate risks.

    • Safety also involves providing proper training and education to employees or individuals.

    • Regular inspections and maintenance of equipment and facilities are e...

  • Answered by AI
  • Q2. Telling some thing for safe work at height
Round 2 - HR 

(3 Questions)

  • Q1. Tell me about you self
  • Q2. Which grade hand gloves use at the time of electrical work
  • Ans. 

    Insulated rubber gloves are used for electrical work.

    • Insulated rubber gloves provide protection against electric shock.

    • They are made of rubber or other insulating materials.

    • The gloves should be tested and certified for electrical use.

    • They should have a voltage rating that matches the electrical work being performed.

    • Proper care and maintenance of the gloves is important to ensure their effectiveness.

    • Other personal prote...

  • Answered by AI
  • Q3. Which precautions use at the time of excavation
  • Ans. 

    Precautions to take during excavation

    • Ensure proper planning and risk assessment before starting excavation

    • Locate and mark underground utilities to avoid accidental damage

    • Use proper protective equipment such as hard hats, safety glasses, and high visibility clothing

    • Implement proper shoring or sloping techniques to prevent cave-ins

    • Monitor the atmosphere for hazardous gases or lack of oxygen

    • Establish clear communication a...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It's very cool interview face to face by HR

Get interview-ready with Top L&T Construction Interview Questions

Interview Questionnaire 

6 Questions

  • Q1. What is work permit ?
  • Q2. Do you about confined space?
  • Ans. 

    Confined space refers to an area that is not designed for continuous human occupancy and has limited entry and exit points.

    • Examples include tanks, silos, sewers, and tunnels.

    • Confined spaces pose a risk of asphyxiation, suffocation, and exposure to hazardous substances.

    • Proper training, equipment, and procedures are necessary for safe entry and work in confined spaces.

  • Answered by AI
  • Q3. What is full form of HIRA ?
  • Ans. 

    HIRA stands for Hazard Identification and Risk Assessment.

    • HIRA is a process used to identify potential hazards and assess the associated risks.

    • It involves identifying hazards, evaluating the likelihood and severity of harm, and implementing controls to mitigate the risks.

    • HIRA is an important tool for ensuring workplace safety and preventing accidents.

    • Examples of hazards that may be identified through HIRA include chemi...

  • Answered by AI
  • Q4. Necessary requirement during work at height
  • Ans. 

    Necessary requirement during work at height

    • Proper training and certification

    • Use of appropriate personal protective equipment (PPE)

    • Inspection and maintenance of equipment

    • Fall protection systems

    • Safe work practices and procedures

    • Emergency rescue plan

    • Communication and coordination among workers

    • Risk assessment and hazard identification

  • Answered by AI
  • Q5. What is Excavation hazard's?
  • Ans. 

    Excavation hazards refer to the risks associated with digging or trenching activities.

    • Potential cave-ins or collapses of the excavation site

    • Contact with underground utilities or other buried objects

    • Falls or slips into the excavation site

    • Exposure to hazardous materials or gases

    • Equipment accidents or malfunctions

    • Lack of proper protective systems or equipment

    • Examples include construction sites, utility installations, and

  • Answered by AI
  • Q6. Electrical hazard and precaution
  • Ans. 

    Electrical hazards can cause serious injuries or even death. Precautions include proper training, use of personal protective equipment, and following safety procedures.

    • Ensure all electrical equipment is properly grounded

    • Use lockout/tagout procedures when working on electrical equipment

    • Wear appropriate personal protective equipment, such as rubber gloves and safety glasses

    • Never work on electrical equipment when it is en...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Confidence must be

Interview Questionnaire 

2 Questions

  • Q1. Related to Ehs
  • Q2. DG

Interview questions from similar companies

I applied via Referral and was interviewed before Nov 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1.  About my Self
  • Q2. Height work safety & Control measures
  • Ans. 

    Height work safety involves implementing control measures to prevent falls and injuries.

    • Conducting a risk assessment before starting any work at height

    • Providing appropriate training and equipment for workers

    • Implementing a fall protection plan

    • Regularly inspecting equipment and ensuring it is in good condition

    • Establishing clear communication and emergency procedures

    • Examples of control measures include guardrails, safety ...

  • Answered by AI
  • Q3. Engineering control, legal control , administrative control, ppe

Interview Preparation Tips

Interview preparation tips for other job seekers - No Fear For Interview Questions

I applied via Referral and was interviewed before Nov 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Height work safety &Control measures
  • Q2. Administrative control, Engineering control, legal control

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't Fear & Free to talk

I applied via Naukri.com and was interviewed before Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Intro, safety officer roles and responsibilities
  • Q2. Co gas limit
  • Ans. 

    The CO gas limit is the maximum allowable concentration of carbon monoxide in the air.

    • The CO gas limit is set by regulatory agencies to protect human health and safety.

    • The limit varies depending on the location and type of facility.

    • For example, the Occupational Safety and Health Administration (OSHA) has set a permissible exposure limit (PEL) of 50 parts per million (ppm) for an 8-hour workday.

    • In residential homes, the...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident
Contribute & help others!
anonymous
You can choose to be anonymous

L&T Construction Interview FAQs

How many rounds are there in L&T Construction Safety Supervisor interview?
L&T Construction interview process usually has 1-2 rounds. The most common rounds in the L&T Construction interview process are HR, One-on-one Round and Resume Shortlist.
What are the top questions asked in L&T Construction Safety Supervisor interview?

Some of the top questions asked at the L&T Construction Safety Supervisor interview -

  1. Which device is used to prevent fire in gas cutting se...read more
  2. Which grade hand gloves use at the time of electrical w...read more
  3. What is the lifting work sys...read more

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

REVIEWS

L&T Construction

No Reviews

SALARIES

L&T Construction

SALARIES

L&T Construction

SALARIES

Zydus Lifesciences

SALARIES

Zydus Lifesciences

SALARIES

Zydus Lifesciences

No Salaries

LIST OF COMPANIES

Discover companies

Find best workplace

SALARIES

Zydus Lifesciences

Tell us how to improve this page.

L&T Construction Safety Supervisor Interview Process

based on 12 interviews

1 Interview rounds

  • HR Round
View more

Sun Pharmaceutical Industries

Join us and thrive in a company culture that inspires and empowers.

L&T Construction Safety Supervisor Salary
based on 196 salaries
₹1.5 L/yr - ₹5 L/yr
7% less than the average Safety Supervisor Salary in India
View more details

L&T Construction Safety Supervisor Reviews and Ratings

based on 91 reviews

4.0/5

Rating in categories

4.0

Skill development

3.8

Work-life balance

3.9

Salary

3.7

Job security

4.0

Company culture

3.5

Promotions

3.9

Work satisfaction

Explore 91 Reviews and Ratings
Assistant Manager
1.1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
703 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Construction Manager
504 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Civil Site Engineer
393 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineering Manager
323 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare L&T Construction with

Tata Projects

4.2
Compare

Shapoorji Pallonji Group

4.1
Compare

Hindustan Construction Company

4.2
Compare

GAMMON INDIA

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview