20+ Safety Steward Interview Questions and Answers

Safety belt is required at any height for height work.

• Safety belt is necessary for any work performed at height to prevent falls and ensure worker safety.

• The specific height at which a safety belt is required may vary depending on local regulations and industry standards.

• In general, safety belts should be worn whenever working at a height where there is a risk of falling.

• Examples of height work that require safety belts include construction work on scaffolding, roof repairs, ...read more

Safety is the state of being free from harm or danger.

• Safety involves identifying and assessing potential hazards and taking measures to prevent them.

• It includes following safety protocols and procedures to minimize risks.

• Examples of safety measures include wearing protective gear, using safety equipment, and practicing safe behavior.

• Safety is important in various settings such as workplaces, homes, and public spaces.

• It is a shared responsibility and requires cooperation and ...read more

Confined space entry exit procedure is a set of safety measures taken while entering and exiting a confined space.

• Identify the confined space and assess the hazards

• Develop a written permit to work

• Provide adequate ventilation and lighting

• Use appropriate personal protective equipment

• Have a rescue plan in place

• Monitor the atmosphere continuously

• Ensure proper communication between workers inside and outside the confined space

A hazard is a potential source of harm or danger that may cause injury, damage to property, or harm to the environment.

• Hazards can be physical, chemical, biological, or psychological in nature.

• Examples of hazards include sharp objects, toxic chemicals, infectious diseases, and stressful work environments.

• Identifying and assessing hazards is an important part of risk management and ensuring safety in the workplace.

• Preventative measures such as training, protective equipment, a...read more

Excavation digging can be measured using various methods and tools.

• One common method is using a tape measure to measure the length, width, and depth of the excavation.

• Another method is using a laser level to measure the depth and slope of the excavation.

• Excavation can also be measured by counting the number of truckloads of soil or debris removed.

• In some cases, ground-penetrating radar or sonar can be used to measure the dimensions of the excavation without physical contact.

• I...read more

Safe work procedure is a set of step-by-step instructions to ensure safe and efficient completion of a task.

• Safe work procedures outline the necessary steps to complete a task safely

• They identify potential hazards and provide instructions on how to mitigate them

• They are developed based on industry standards and best practices

• Examples include lockout/tagout procedures, confined space entry procedures, and fall protection procedures

We plan to implement site safety by following a comprehensive safety plan and providing regular training to all employees.

• Developing a safety plan that outlines all safety procedures and protocols

• Conducting regular safety audits to identify potential hazards and address them promptly

• Providing regular safety training to all employees to ensure they are aware of safety procedures and protocols

• Enforcing safety rules and regulations consistently to ensure compliance

• Encouraging em...read more

Safety is the state of being protected from harm or danger. Risk is the potential for harm or loss. Hazard is a source or situation that has the potential to cause harm.

• Safety refers to the measures taken to prevent accidents, injuries, or harm to individuals or property.

• Risk is the possibility of suffering harm or loss due to exposure to a hazard.

• Hazard is any source or situation that has the potential to cause harm, such as a chemical substance, a physical condition, or an ...read more

Hazard, risk assessments, and HIRA refer to the process of identifying potential dangers and evaluating the likelihood of harm occurring.

• Hazard assessment involves identifying potential sources of harm or danger in the workplace.

• Risk assessment involves evaluating the likelihood and severity of harm that could result from a hazard.

• HIRA (Hazard Identification and Risk Assessment) is a systematic process used to identify, assess, and control hazards in the workplace.

• Examples of...read more

Scaffolding is a temporary structure used in construction to support workers and materials.

• Scaffolding is typically made of metal or wood and is erected around a building or structure.

• It is used to provide a safe working platform for workers to perform tasks at height.

• Scaffolding must be designed, erected, and maintained by trained professionals to ensure safety.

• Hazards associated with scaffolding include falls, collapsing structures, and electrocution.

• Precautions include reg...read more

A work permit is a document that authorizes a person to perform a specific job or task in a designated area.

• Work permits are typically issued by employers or regulatory agencies.

• They outline the specific job or task that the person is authorized to perform.

• They may also include information about safety precautions and equipment requirements.

• Examples of work permits include hot work permits, confined space entry permits, and excavation permits.

I will improve safety on site by implementing regular safety inspections, providing ongoing safety training, and promoting a culture of safety awareness.

• Conduct regular safety inspections to identify and address potential hazards

• Provide ongoing safety training for all employees to ensure they are aware of safety protocols and procedures

• Promote a culture of safety awareness by encouraging employees to report any safety concerns or incidents

• Implement safety incentives or reward...read more

Fire extinguisher use is crucial for preventing and controlling fires.

• Identify the type of fire before using the extinguisher

• Remember the acronym PASS: Pull the pin, Aim at the base of the fire, Squeeze the handle, Sweep side to side

• Know the location of the nearest fire extinguisher

• Regularly check the pressure gauge and ensure the extinguisher is in good condition

• Attend fire safety training to learn proper use of fire extinguishers

Fire extinguishing methods include water, foam, dry chemical, CO2, and halon.

• Water is effective for extinguishing fires involving ordinary combustibles such as wood, paper, and cloth.

• Foam is used for flammable liquid fires and can also be used for Class A fires.

• Dry chemical is effective for flammable liquid and electrical fires.

• CO2 is used for electrical fires and flammable liquid fires.

• Halon is used for fires in areas where sensitive equipment is present.

There are five types of fire extinguishers: A, B, C, D, and K.

• Type A extinguishers are for fires involving ordinary combustibles like wood, paper, or cloth.

• Type B extinguishers are for fires involving flammable liquids like gasoline or oil.

• Type C extinguishers are for fires involving electrical equipment.

• Type D extinguishers are for fires involving flammable metals like magnesium or titanium.

• Type K extinguishers are for fires involving cooking oils and fats commonly found in ...read more

Electrocution can be caused by various factors such as faulty wiring, contact with power lines, and improper use of electrical equipment.

• Faulty wiring

• Contact with power lines

• Improper use of electrical equipment

• Water and electricity

• Lightning strikes

• Overloaded circuits

• Exposed electrical parts

• Damaged insulation

• Lack of grounding

• Metal objects near power sources

Fires are classified based on the type of fuel involved.

• Class A fires involve ordinary combustibles like wood, paper, and cloth.

• Class B fires involve flammable liquids and gases like gasoline and propane.

• Class C fires involve electrical equipment like appliances and wiring.

• Class D fires involve combustible metals like magnesium and titanium.

• Class K fires involve cooking oils and fats.

• Each class requires a different type of extinguisher.

• Fires can also be classified as either s...read more

An accident is an unexpected and unintentional event that causes harm or damage.

• Accidents can happen in various settings, such as at home, on the road, or at work.

• They can result in physical injuries, property damage, or both.

• Accidents can be caused by human error, equipment failure, or environmental factors.

• Examples of accidents include car crashes, slips and falls, and workplace injuries.

• Prevention measures such as safety protocols and training can help reduce the risk of a...read more

There are different types of fire extinguishers for different types of fires, including Class A, B, C, D, and K.

• Class A fire extinguishers are used for fires involving ordinary combustible materials like wood, paper, and cloth.

• Class B fire extinguishers are used for fires involving flammable liquids like gasoline, oil, and grease.

• Class C fire extinguishers are used for fires involving electrical equipment.

• Class D fire extinguishers are used for fires involving combustible met...read more

Classes of fire refer to different types of fires based on the materials involved.

• Class A: Fires involving ordinary combustibles such as wood, paper, and cloth

• Class B: Fires involving flammable liquids like gasoline and oil

• Class C: Fires involving energized electrical equipment

• Class D: Fires involving combustible metals like magnesium and titanium

• Class K: Fires involving cooking oils and fats

Safety is the state of being protected from harm or danger.

• Safety involves taking precautions to prevent accidents or injuries.

• It is important to identify potential hazards and take steps to mitigate them.

• Safety is a shared responsibility and requires cooperation and communication.

• Examples of safety measures include wearing personal protective equipment, following procedures and protocols, and maintaining equipment and facilities.

• Safety is essential in industries such as cons...read more

Accommodation by company refers to the housing provided by an employer to their employees.

• It is a benefit provided by some companies to their employees

• The housing can be on-site or off-site

• It can be provided for short-term or long-term stays

• Examples include oil rigs, mining camps, and corporate apartments

The salary expected for the Safety Steward position will depend on factors such as experience, location, and company budget.

• Research the average salary range for Safety Stewards in your area

• Consider your level of experience and any additional qualifications you may have

• Be prepared to negotiate based on the responsibilities of the role and your value to the company

There are different types of fires based on the fuel involved.

• The most common types of fires are Class A, Class B, Class C, Class D, and Class K.

• Class A fires involve ordinary combustible materials like wood, paper, and cloth.

• Class B fires involve flammable liquids like gasoline, oil, and grease.

• Class C fires involve energized electrical equipment.

• Class D fires involve combustible metals like magnesium and titanium.

• Class K fires involve cooking oils and fats.

• Each type of fire...read more

The element of fire refers to the chemical reaction that produces heat, light, and flames.

• Fire is a rapid oxidation process that releases energy in the form of heat and light.

• It requires three elements to sustain: fuel, oxygen, and heat.

• Fire can be classified into different types, such as Class A (ordinary combustibles), Class B (flammable liquids), and Class C (electrical fires).

• Fire safety measures include fire extinguishers, fire alarms, and evacuation plans.

• Examples of fi...read more

Types of permits include work permits, confined space permits, hot work permits, and excavation permits.

• Work permits are required for tasks such as electrical work or working at heights.

• Confined space permits are needed for entering confined spaces with potential hazards.

• Hot work permits are necessary for tasks involving open flames or high temperatures.

• Excavation permits are required for digging or trenching activities.

• Other types of permits may include lockout/tagout permit...read more