Filter interviews by
I applied via Naukri.com and was interviewed in Apr 2021. There were 6 interview rounds.
If concrete cube fails after 28 days of casting, investigate the cause and take corrective measures.
Investigate the cause of failure
Check if the mix design was correct
Check if the curing was done properly
Take corrective measures to prevent future failures
Re-cast the concrete cube for further testing
PEB components are pre-engineered building components that are manufactured off-site and assembled on-site.
PEB components include primary framing, secondary framing, roof and wall panels, and accessories.
Primary framing consists of columns, rafters, and beams that support the weight of the building.
Secondary framing includes purlins, girts, and eave struts that provide additional support for the roof and walls.
Roof and...
Material testing on site is crucial for ensuring quality and safety of construction projects.
Various tests are conducted on materials like concrete, steel, and soil to ensure they meet the required standards.
Tests include compressive strength, tensile strength, and moisture content.
Testing equipment like slump cones, compression machines, and moisture meters are used on site.
Results of material testing are recorded and...
The best cement depends on the specific project requirements and conditions.
Portland cement is commonly used for general construction purposes.
White cement is used for decorative purposes.
Rapid hardening cement is used for quick construction projects.
Low heat cement is used for massive concrete structures.
Blast furnace slag cement is used for marine structures and road construction.
The choice of cement should be based ...
PEB structures use various types of steel depending on the requirements.
Primary framing members are made of hot rolled I-sections or built-up sections.
Secondary framing members are made of cold formed C or Z sections.
Roof and wall panels are made of galvanized steel sheets.
Bolts and nuts are made of high strength carbon steel.
Tension members are made of high strength steel cables or rods.
Examples of steel grades used a
I applied via Referral and was interviewed in Jan 2024. There were 3 interview rounds.
I applied via Job Fair and was interviewed in Nov 2023. There were 2 interview rounds.
In general, aptitude tests measure ones competence in logical reasoning, numerical skills, or verbal ability.
The approach to technical issues in civil engineering often involves analyzing the problem, considering various solutions, and selecting the most feasible option.
Identify the technical issue and its impact on the project
Analyze the possible solutions and their pros and cons
Consider factors such as cost, time, and resources
Consult with team members or experts for input
Select the most feasible solution and implement it
Mo
I applied via Company Website and was interviewed in Aug 2023. There were 3 interview rounds.
Test of sand and water mineral
Autocad design structure serves as the foundation for creating detailed and accurate engineering drawings.
Autocad design structure includes layers, blocks, and dimensions to organize and display information.
It allows for precise measurements, annotations, and annotations to be added to drawings.
Autocad design structure enables easy editing and modification of drawings.
Examples of autocad design structures include creat...
Design of road line involves determining the alignment, width, and markings of a road to ensure safety and efficiency.
Consider the traffic volume and speed when determining the width of the road.
Ensure proper alignment to minimize sharp curves and slopes.
Include appropriate road markings such as lane dividers, pedestrian crossings, and stop lines.
Take into account factors like drainage, visibility, and road conditions
Construction of road project involves planning, design, and execution of building roads for transportation.
Road project starts with surveying the land and designing the road layout.
Materials like asphalt, concrete, and gravel are used for construction.
Proper drainage systems are essential to prevent water damage to the road.
Quality control measures are implemented to ensure durability and safety.
Regular maintenance and...
Various quality control tests for concrete include slump test, compressive strength test, water absorption test, and air content test.
Slump test measures the consistency and workability of concrete.
Compressive strength test determines the strength of concrete by applying a compressive force.
Water absorption test assesses the porosity of concrete.
Air content test measures the amount of air trapped in concrete to ensure ...
I applied via Naukri.com
Cement grade refers to the strength and quality of cement used in construction.
Cement grade is determined by the compressive strength of cement mortar cubes after 28 days of curing.
The most commonly used cement grades are 33, 43, and 53, indicating their respective compressive strengths in megapascals (MPa).
Higher cement grades are used for structures that require higher strength, such as bridges and high-rise building...
Yes, the standard size of a concrete cube is 15 cm × 15 cm × 15 cm.
The standard size of a concrete cube is used for testing the compressive strength of concrete.
The cubes are casted and cured for 28 days before testing.
The cubes are tested using a compression testing machine.
The compressive strength of concrete is calculated by dividing the maximum load applied to the cube by the cross-sectional area of the cube.
I applied via Company Website and was interviewed in Sep 2022. There were 2 interview rounds.
Curing is the process of maintaining moisture and temperature conditions for freshly placed concrete to promote its hydration and strength gain.
Curing is essential for the strength and durability of concrete.
It involves keeping the concrete moist and at a proper temperature for a specific period of time.
Curing can be done using various methods such as water curing, membrane curing, and steam curing.
The duration of curi...
The strength of cement depends on its grade and type.
The strength of cement is measured in terms of compressive strength.
The grade of cement determines its strength. Higher the grade, higher the strength.
Type of cement also affects its strength. For example, Portland cement has higher strength than lime cement.
The strength of cement is also influenced by factors such as curing time, temperature, and humidity.
I applied via Approached by Company and was interviewed in May 2022. There were 2 interview rounds.
I applied via Walk-in and was interviewed in Sep 2022. There were 2 interview rounds.
Degree of saturation and density are important parameters in civil engineering.
Degree of saturation is the ratio of the volume of water to the volume of voids in a soil sample.
It is expressed as a percentage and is important in determining the soil's shear strength and compressibility.
Density is the mass per unit volume of a substance.
In civil engineering, density is important in determining the weight and volume of ma...
I applied via Naukri.com and was interviewed in Mar 2022. There was 1 interview round.
Senior Executive
5
salaries
| ₹4 L/yr - ₹7 L/yr |
Purchase Executive
4
salaries
| ₹2.6 L/yr - ₹3.6 L/yr |
Company Secretary
4
salaries
| ₹3.6 L/yr - ₹6 L/yr |
Deputy Manager Purchase
4
salaries
| ₹6 L/yr - ₹8.4 L/yr |
Control Room Officer
4
salaries
| ₹2.5 L/yr - ₹3.5 L/yr |
Tata Group
Reliance Industries
Aditya Birla Group
Mahindra & Mahindra